Flashlight Parts and Tools

XM-L 975-Lumen LED Emitter White Light Bulb (3.0~3.5V)

- Bulb type: XMLAWT-0-1A0-T60-00-0001 - 910~975-Lumen ultra bright white light output - Working voltage: 3.0~3.5V - Working current: 3000mA - Aluminum plate: 20mm

US$8.30

(17 Reviews)

1.5V~4.2V 3W Cree Circuit Board for Flashlights (16.7mm*5.6mm)

- 1*Cree 3W regulated power output - Output current: 1.5V 600±50mA; 4.2V 1.2A - 16.7mm diameter base, 5.6mm overall depth - Voltage: 1.5V-4.2V - Fully regulated circuit design

US$2.19

(17 Reviews)

Cree XR-E Q5 LED Drop-in Module (3.7V~18V Input)

Width: 26.5mm Height: 40mm Maximum Output: 200 Lumens Input Voltage Range: 3.7V~18V

US$7.60

(15 Reviews)

18V 5W Cree Circuit Board for Flashlights (16.8mm*5.5mm)

- 1*Cree 5W regulated power output - Output current: 1.25A - 16.8mm diameter base, 5.5mm overall depth - Voltage: 3V-18V - Fully regulated circuit design

US$2.19 US$1.99

(16 Reviews)

1500-2000 MCD 5mm Blue LED Emitters (10-Pack)

- B lue LED light bulbs - Input voltage 3.2 - 3.4V - Brightness :1500 - 2000mcd - Wave length:465 - 470nm

US$1.25

(50 Reviews)

Glass Optics for Flashlights (28mm)

- Converging glass lens with smoothed edges - Fine workmanship and easy to set up - Good for DIY projects

US$1.90

(35 Reviews)

1000-1500 MCD 5mm Red LED Emitters (10-Pack)

1000-1500 MCD 5mm Red LED Emitters (10-Pack)

US$1.16

(28 Reviews)

8000+ mcd 5mm Green LED Emitters (10-Pack)

- 5mm diameter LED - Emits green color (515~520nm) - Light output: >8000mcd - Input voltage: 3.2V~3.4V

US$1.35

(33 Reviews)

5*Cree R2 1200-Lumen White Light Drop-in LED Module (52.7mm*42mm/8.4V Max)

- Aluminum construction - Features 5 x Cree LED emitters - 5 x White Cree R2 - Maximum accepted voltage input: 8.4V (2.6~8.4V) - Diameter at bezel edge: 52.7mm - Height without sup

US$27.50

(14 Reviews)

3W LED Emitter on Star (Multicolored RGB)

- Seperate input wires for Red, Green and Blue allowing customization of colors - Driving voltage and current per channel: Red: 2.5V ~ 3.0V, 350mA Green: 3.2V ~ 3.8V, 350mA Blue: 3

US$3.40

(33 Reviews)

CREE XP-G R51B 7000K 350LM Emitter with 16mm Base

- White light - Voltage: 3.7V - Color temperature: 6500~7000K - Brightness: 350LM - Diameter: 16mm

US$5.40

(6 Reviews)

50mm*18mm 2~80-Degree Glass Optics

- Note : there was a caliper picture shown and the caliper wasn't correctly zeroed when taking the picture. DX will retake the picture showing the lens to be 50mm with a caliper. .

US$3.50

(21 Reviews)

Cree XR-E R2 (WG) Emitter on Premium Star

- Cree R2 bin emitter ( Cree original BIN label available in picture gallery on the left ) - Cree Flux/Color BIN: R2 WG - 3.7V typical driving voltage - Premium "Star" connection b

US$5.30

(18 Reviews)

Cree XP-G R5 320-Lumen White Light LED Drop-in Module (26.5mm*29.3mm/18V Max)

- Aluminum construction - Features a XP-G R5 Cree LED emitter - Maximum accepted voltage input: 18V (3.6~18V) - 1000mA current output measured at LED (manufacturer rated) - Diamete

US$9.70

(11 Reviews)

Cree R2-WC 250-Lumen 5-Mode Memory Drop-in LED Module for Flashlights (3.6V~8.4V)

- Features a Cree XR-E R2-WC LED Emitter - Bezel diameter: 26.5mm - Height including support spring: 38mm (29mm without spring) - Input voltage range: 3.0V~8.4V - Maximum brightnes

US$9.90

(14 Reviews)

26.5mm Aluminum Reflector Drop-in Module Set (without Emitter)

26.5mm Aluminum Reflector Drop-in Module Set (without Emitter)

US$2.76

(7 Reviews)

1000-1500 MCD 5mm Yellow LED Emitters (10-Pack)

1000-1500 MCD 5mm Yellow LED Emitters (10-Pack)

US$1.16

(14 Reviews)

2.7V~6V 3W Cree Circuit Board for Flashlights (15mm*2.7mm)

- 1*Cree 3W - Output current: 1.0A - 15mm diameter base, 2.7mm overall depth - Voltage: 2.7V-6V - Fully regulated circuit design

US$2.36

(8 Reviews)

3W InfraRed LED 850nm IR Emitter on 2cm Star (1.5V~1.7V DC)

3W InfraRed LED 850nm IR Emitter on 2cm Star (1.5V~1.7V DC)

US$5.99

(4 Reviews)

200mW 532nm Green Laser Module (3V 11.9mm)

- Exquisite and durable - Great for DIY projects - Electric current: 250mA

US$40.20

(8 Reviews)

Flashlight Parts and Tools

20~100W Silver Plated Plastic Smooth Reflector (58mm)

- Silver plating Reflector - Diameter: 58mm

US$2.10

(8 Reviews)

SST-90 2300LM LED Emitter 8000K White Light Bulb (4.2V)

- Bulb type: SST-90 - 2300 Lumen output - Working voltage: 4.2V - Working current: 9000mA - Color: White (5000-8000K) - Plate: 20mm

US$28.90

(3 Reviews)

Clicky Switch for Flashlights (16mm 5-Pack)

- Rating: 1.5A 250VDC - Contact Resistance: =100mO max (initial) - Insulation Resistance: =100MO (minDC 250V) - Dielectric Strength: AC1500V (50/60Hz for 1minute) - Electrically Li

US$1.94

(23 Reviews)

59mm*20mm 15~120-Degree 99% Transmittance Glass Optic

59mm*20mm 15~120-Degree 99% Transmittance Glass Optic

US$4.05

(6 Reviews)

Aluminum Cree Reflector Module Set (no emitter)

- Reflector diameter: 26.5mm - Height with spring: 35mm - Height without spring: 28mm

US$2.97

(17 Reviews)

1W 90LM 8000K White Light LED Bulb (3.2V)

- Ultra bright high intensity white light LED - Rated voltage: 3.2V 1W - Color: 7000~8000K white - Luminous Flux: 80~90Lumen

US$1.94

(1 Reviews)

5W LED Emitter on Star (White Light)

- Power: 5W - Rated voltage: 6~8V - Current: 700mA

US$4.10

(11 Reviews)

35mm*35mm Aluminum Textured/OP Reflector for Cree LED Emitters (2-Pack)

- Aluminum textured/OP reflector - Designed for Cree XR-E LED emitters - 35mm diameter - 32mm height

US$6.02 US$5.98

(10 Reviews)

Glow-in-the-Dark Silicone Tailcaps for Flashlights (14mm Green / 10-Pack)

- 17.5mm soft silicone tailcap for flashlights - Green coloured - Good for DIY projects

US$1.90 US$1.89

(79 Reviews)

75mm Optical Glass Lens for Flashlight/Spot Light

- Angle: 20~65 degree - Diameter: 75mm - Material: K9/optical glass - Light transmittance: 99% - Compatible for 10W/20W/50W/100W LED spot light, automobile lights, DIY projecting l

US$7.10

(3 Reviews)

3.6V~16V 925mA Constant Current LED Driver Board for Cree and SSC LEDs (4-pack)

- 17mm diameter board with 6mm max height - AX2002 chip (upgraded from Zetex C310 in 6/2009) - Schottky SS14 diode - Suitable for driving 1~4 LEDs (not suitable for 1 white LED fro

US$7.67 US$6.97

(25 Reviews)

1W 850nm IR LED Emitter on Star (1.7~1.8V 700mA)

1W 850nm IR LED Emitter on Star (1.7~1.8V 700mA)

US$3.96

(3 Reviews)

5-Watt 70-Lumen RGB LED Emitter

- 5-watt rated power emitter - Red LED light: 2.0V~2.5V, 50 lumens brightness - Green LED light: 3.2V~3.6V, 70 lumens brightness - Blue LED light: 3.2V~3.6V, 30 lumens brightness -

US$6.11

(5 Reviews)

16-Mode 3W 3.7V 7135 Circuit Board for Cree and SSC Emitters (3.7V 1000mA Output)

- 16 mode driver circuit board for CREE / SSC LEDs - 17mm circuit board base diameter - Powered by 3 x 7135 IC's - 1000mA 3.7V output - 16-mode consolidated into 3 groups: Low (10%

US$3.69 US$3.60

(25 Reviews)

3V~8.4V 5W Cree 5-Mode Memory Circuit Board for Flashlights (16.7mm*6.3mm)

- 1*Cree 5W power output - Output current: 1A with P4 emitter; 1.2A with Q5 emitter - 16.8mm diameter base, 6.3mm overall depth - Voltage: 3V-8.4V - Mode: High 1.2A±100mA; Mid 550m

US$3.13 US$2.99

(4 Reviews)

CREE XP-G R51B 7000K 350LM Emitter with 14mm Base

- White light - Voltage: 3.7V - Color temperature: 6500~7000K - Brightness: 350LM - Diameter: 14mm

US$6.50

(3 Reviews)

25mm Plastic Reflector for LED Flashlights and Lighting Devices (5-Pack)

- 25mm diameter - 15 degrees reflection angle

US$2.87

(3 Reviews)

1W 90LM 3200K Warm White LED Emitter (3.2V)

- Ultra bright high intensity warm white light LED emitter - Rated voltage: 3.2V 1W - Color: 3000~3200K warm white - Luminous Flux: 80~90Lumen

US$1.88

(4 Reviews)

Cree R2-WC 3-Mode + 0~100% LED Drop-in Module for WF-502B and Flashlights Alike (3.6V~8.4V)

- Features a Cree XR-E R2-WC LED emitter - 200 lumens (manufacturer rated) - Voltage input: 3.6V~8.4V - 1100mA digitally regulated LED driver circuitry - Built-in 3 modes + 0~100%

US$11.90

(13 Reviews)

Waterproof Water Tight High Powered 1W LED Module (12V/White)

Waterproof Water Tight High Powered 1W LED Module (12V/White)

US$11.99

(9 Reviews)

Flashlight Parts and Tools

CYEE055YW080A 3W 80-Lumen 3000K White LED Emitter

- 3W power consumption - Emitter chip model: CYEE055YW080A - Voltage input: 3.5V~4.0V - Current: 600mA~700mA - Brightness: 80 lumens (manufacturer rated) - Color temperature: 2800K

US$3.01

(6 Reviews)

0.5W LED White Light Bulbs (5-Piece Pack)

- White LED emitters - Power: 0.3~0.5W - Rated voltage: 3.2~3.4V - Current: 40~60mA - Comes with 5 bulbs

US$1.70

(2 Reviews)

52.75mm Aluminum Reflector for SSC P7 LED Emitters

- Aluminum orange peel / textured reflector design specifically for Seoul Semiconductors SSC P7 LED emitters - Diameter: 52.75mm - Height: 24.3mm

US$4.79

(6 Reviews)

CREE XML-T6 5-Mode 6700K 900-Lumen Smooth Aluminum Drop-in Module with Textured Reflector

- Aluminum construction with textured reflector - Features a CREE XML-T6 LED emitter - 5-mode driver circuitry: Low > Mid > Hi > Fast Strobe > SOS - With mode memory - Color temper

US$19.70

(6 Reviews)

5*Cree R2 5-Mode 1200-Lumen White Light Drop-in LED Module (52.7mm*42mm/8.4V Max)

- Aluminum construction - Features 5 x Cree LED emitters - 5 x White Cree R2 - 5-mode driver circuitry: Hi (1000mA 1200LM) > Mid (600mA 400LM) > Lo (300mA 200LM) > Fast Strobe (400

US$28.40

(6 Reviews)

MX6-Q4 235LM 6300K LED White Light Emitter (3.2V/1000mA)

- Type: MX6-Q4 - Color temperature: 5700~6300K white - Working voltage: 3.2V - Working current: 350~1000mA - Brightness: 100~107 Lumen (350mA) / 220~235 Lumen (1000mA)

US$4.50

(0 Reviews)

39mm Toughened Glass Lens for SKU 29489/30864 (2-Pack)

- Toughened glass lens with smoothed edges - Fine workmanship and easy to set up - Good for DIY projects for SKU 29489/30864

US$1.40

(1 Reviews)

Silicone Tailcaps for Flashlights (14mm Black / 10-Pack)

- 17.6mm soft silicone tailcap for flashlights - Black coloured - Good for DIY projects

US$1.71

(11 Reviews)

CREE XM-LT6 5-Mode 6700K 450-Lumen Drop-in Module with Textured Reflector

- Aluminum construction with textured reflector - Features a CREE XM-LT6 LED emitter - 5-mode driver circuitry: Low > Mid > Hi > Fast Strobe > SOS - With mode memory - Color temper

US$14.20

(9 Reviews)

Cree XP-G R5 5-Mode 320-Lumen White Light LED Drop-in Module (26.5mm*29.3mm/18V Max)

- Aluminum construction - Features a XP-G R5 Cree LED emitter - Maximum accepted voltage input: 18V (3.6~18V) - 1000mA current output measured at LED (manufacturer rated) - 5-mode

US$10.70

(11 Reviews)

23mm*8mm 60-Degree 93% Transmittance Glass Optics (2-Pack)

23mm*8mm 60-Degree 93% Transmittance Glass Optics (2-Pack)

US$3.10

(4 Reviews)

Water-tight O-Ring Seal (20mm 20-Pack)

- 20mm soft silicone rings - Orange coloured - Good for DIY projects - Thickness: 1.5mm

US$1.44

(3 Reviews)

Flashlight Parts and Tools

Star Connection Board for CREE LED Emiters (20mm Diameter / 5-Pack)

Star Connection Board for CREE LED Emiters (20mm Diameter / 5-Pack)

US$2.00

(2 Reviews)

2.7~4.2V Cree Q5 5-Mode Memory Circuit Board for Flashlights (16.8mm)

- 1*Cree Q5 regulated power output - Output current: 1100mA +/-100mA - 16.8mm diameter base - Voltage: 2.7~4.2V - 5-Mode: High (100%); Mid (25%), Low (5%); 11HZ; SOS - Memory: Circ

US$2.90

(1 Reviews)

Aluminum Textured/OP Reflector for Cree MC-E LED Emitters (41.5mm*18mm)

Aluminum Textured/OP Reflector for Cree MC-E LED Emitters (41.5mm*18mm)

US$3.90 US$3.32

(2 Reviews)

3W 180LM 3200K Warm White LED Emitter (3.4~3.8V)

- Ultra bright high intensity white light LED emitter - Rated voltage: 3.4~3.8V 3W - Color: 3000~3200K warm white - Luminous Flux: 160~180Lumen

US$3.00

(3 Reviews)

1W 80-90LM Warm White LED Light Bulbs (3.2-3.4V/10-Piece Pack)

- 1W warm white LED bulbs - Luminous flux: 80-90LM - Voltage: 3.2-3.4V - Current: 350mA - Color temperature: 2800-3000K - 10 pieces pack

US$8.90

(0 Reviews)

50mW 532nm Green Laser Module (3V 11.9mm)

- Exquisite and durable - Great for DIY projects - Electric current: 250mA

US$16.20

(18 Reviews)

Flashlight Parts and Tools

0.5W IR LED Emitter on 20mm Board

0.5W IR LED Emitter on 20mm Board

US$2.71

(5 Reviews)

50mm Optical Glass Lens for Flashlight/Spot Light

- Angle: 8~120 degree - Diameter: 50mm - Material: optical glass - Light transmittance: 98% - Compatible for LED spot light, flashlight, DIY LED light etc.

US$4.10

(1 Reviews)

XM-L T6 885LM LED Emitter 6000K White Light Bulb (3.0~3.5V)

- Bulb type: XM-L T6 - 885 Lumen output - Working voltage: 3.0~3.5V - Color: White (1D 6000K) - Plate: 16mm

US$8.60

(7 Reviews)

10mW 532nm Green Laser Module (3V 11.9mm)

- Exquisite and durable - Great for DIY projects - Electric current: 250mA

US$7.86

(12 Reviews)

Flashlight Parts and Tools

Replacement Tailcap Switch for Surefire 6P/C1 + more (25.5mm Diameter Threads)

Replacement Tailcap Switch for Surefire 6P/C1 + more (25.5mm Diameter Threads)

US$3.64 US$3.50

(9 Reviews)

Glow-in-the-Dark Water-tight Silicone O-Ring Seal (20-Pack 24 mm)

Glow-in-the-Dark Water-tight Silicone O-Ring Seal (24mm 20-Pack)

US$2.50

(18 Reviews)

Flashlight Parts and Tools

20mm 120-Degree Optic (5-Pack)

20mm 120-Degree Optic (5-Pack)

US$3.34

(0 Reviews)

66mm*24mm 2~90-Degree 99% Transmittance Glass Optic

66mm*24mm 2~90-Degree 99% Transmittance Glass Optic

US$4.88

(6 Reviews)

Clicky Switch for Flashlights (12mm 5-Pack)

Clicky Switch for Flashlights (12mm 5-Pack)

US$1.85

(4 Reviews)

SST-90 Smooth Aluminum Reflector (7.3CM-Diameter)

- Designed specifically for SST-90 high powered LED emitters - Aluminum material - Smooth reflector - Diameter: 7.3cm - Height: 5.1cm

US$9.10

(4 Reviews)

Glow-in-the-Dark Water-tight Silicone O-Ring Seal (20-Pack 20 mm)

Glow-in-the-Dark Water-tight Silicone O-Ring Seal (20mm 20-Pack)

US$2.50

(18 Reviews)

Flashlight Parts and Tools

100mW 532nm Green Laser Module (3V 11.9mm)

- Exquisite and durable - Great for DIY projects - Electric current: 250mA

US$32.50

(1 Reviews)

Flashlight Parts and Tools

3V~18V Input 3W Cree Drop-in Module (supports Surefire 6P)

- Compatible with 6P flashlights - CREE emitter and texture aluminum - Great for DIY projects - Voltage Range: 3V ~ 18V

US$7.25

(41 Reviews)

Flashlight Parts and Tools

10W LED Emitter (11V~12V / 500 Lumens White / 6500K)

- Input voltage: 11V~12V - Total power consumption: 10W - Output: 500~600 Lumens Total (manufacturer rated) - Color temperature: 6500K White

US$9.99

(7 Reviews)

Flashlight Parts and Tools

XM-L T6 910LM LED White Light Emitter with 18mm Base(2.9~3.5V)

- Bulb type: XM-L T6 - 280~910 Lumen output - Working voltage: 2.9~3.5V - Working current: 700~3000mA - Color: White - Plate diameter: 18mm

US$10.40

(3 Reviews)

8.4V SST-50 5-Mode Memory Circuit Board for Flashlights

- Model: TR-0142B - Designed for Luminus SST-50 LED flashlight - Voltage: 8.4V - 5-Mode: High 4000mA, Mid 2000mA, Low 800mA, Fast Strobe 2800mA, SOS 4000mA - Cable length: 7cm

US$7.40

(4 Reviews)

CREE Q5 WC 235LM LED Emitter with 16mm Base

- White light - Voltage: 3.35~4.05V - Current: 1A - Brightness: 235LM - Diameter: 16mm

US$4.90

(2 Reviews)

4W 50~60Lumen 465~470nm Blue Light 4-LED Emitter (6~8V)

- Material: aluminium alloy board - High power blue light 4-LED emitter - Voltage: 6~8V - Power: 4 x 1W - Current: 700mA - Luminous flux: 56~60LM - Wavelength: 465~470nm

US$7.50

(0 Reviews)

XML-U2-1C 320LM 7000K LED White Light Emitter with 16mm Base(3.7V)

- Bulb type: XML-U2-1C - 300~320 Lumen output at 700mA - Working voltage: 3.7V - Working current: 3.0~3.5A - Color temperature: 6500~7000K white light - Aluminum plate diameter: 16

US$9.40

(2 Reviews)

Star Connection and Heatsink for Cree MC-E LED Emitters - Parallel (5-Pack)

- Designed for the latest Cree MC-E high power LED emitters - Parallel connectivity between the MCE's four internal emitter chips - Efficiently dissipates heat - Premium quality bu

US$2.79 US$2.60

(0 Reviews)

5V~8.4V 15W 5*Cree 5-Mode Memory Circuit Board for Flashlights (26mm*13mm)

- 5*Cree 15W power output - Output current: 17.5V(800mA) with 5*P4/5*Q5 emitters - 26mm diameter base, 13mm overall depth - Voltage: 5V-8.4V - Mode: High 800mA±20mA; Mid 450mA±20mA

US$4.04 US$3.99

(6 Reviews)

Silicone Tailcaps for Flashlights (14mm in Assorted Colors / 12-Pack)

- 17.99mm soft silicone tailcap for flashlights - Assorted colours - Good for DIY projects

US$2.12 US$2.10

(28 Reviews)

Water-tight O-Ring Seal (18mm 20-Pack)

- 18mm soft silicone rings - Black coloured - Good for DIY projects

US$1.37

(12 Reviews)

Flashlight Parts and Tools

Silicone Tailcaps for Flashlights (14mm Orange / 10-Pack)

- 17.6mm soft silicone tailcap for flashlights - Orange coloured - Good for DIY projects

US$1.89

(15 Reviews)

20~100W Silver Plated Plastic Smooth Reflector (50mm)

- Silver plating Reflector - Diameter: 50mm

US$2.00

(1 Reviews)

Cree XLamp MC-E K0-WG 370~700-Lumen LED Emitter on 20mm Star Board (MCE-WG-K0)

- Genuine Cree XLamp MCE-WG-K0 LED emitter ( bin/label guide ) - 370~700 lumens rated brightness - Driving voltage/current: 3.2V~3.5V, 350mA~700mA - Parallel star board/emitter con

US$13.70

(8 Reviews)

High Powered 3W InfraRed IR Drop-in Module for WF-502B Style Flashlights (8.4V)

- Features a high powered IR InfraRed emitter - DC power input: 8.4V - Rated current draw: 950mA - Note that the output is around 3W while the manufacturer's rate power consumption

US$11.80

(14 Reviews)

Cree Q2 LED Drop-In Module for WF-502B and Similar Flashlights (3.6V~12V Input)

- Model: 5AQ2 - Features a Cree XR-E Q2 LED emitter - Built-in driver module - Accepts 3.6V~12V input - Fits into Ultrafire WF-502B and similarly designed flashlights - 26.5mm diam

US$11.60

(7 Reviews)

1W 7000K 70LM White LED Emitter Metal Plate with Cover (3.5V)

- Material: acrylic + aluminum alloy - Working voltage: 3.5V - Working current: 350mA - Brightness: 60~70LM - Color temperature: 6000~7000K white - Light angle: 120 degree - Specif

US$2.70

(2 Reviews)

1W 3500K 60LM Warm White LED Emitter Metal Plate with Cover (3.2~3.6V)

- Material: acrylic + aluminum alloy - Working voltage: 3.2~3.6V - Working current: 350mA - Brightness: 50~60LM - Color temperature: 3000~3500K warm white - Light angle: 120 degree

US$2.60

(0 Reviews)

Clicky Switch for Flashlights (11.8mm 5-Pack)

- Rating: 1A 30VDC - Contact Resistance: 200mO max (initial) - Insulation Resistance:100MO (minDC 250V) - Dielectric Strength: AC500V (50/60Hz for 1minute) - Electrically Life: 100

US$1.80

(11 Reviews)

CREE 7090 XR-E P4 with 14mm Base

- True Cree P4 bin emitter - 3.7V typical driving voltage - 14mm rounded base connection board for easy wiring and upgrading existing small sized (AA/AAA) lights - Cree BIN XR7090W

US$3.59

(6 Reviews)

Cree XR-E P4 LED Emitter on Star (Black)

- True Cree P4 bin emitter - 3.7V typical driving voltage - "Star" connection board for easy wiring and upgrading existing star Luxeon emitters - Now with an upgraded star board wi

US$3.54

(4 Reviews)

Water-tight O-Ring Seal (30mm 20-Pack)

- 30mm soft silicone rings - Black coloured - Good for DIY projects - Thickness: 1.5mm

US$1.74

(2 Reviews)

Flashlight Parts and Tools

8mm 1.8V~3V LED Emitter Red (20-Pack)

8mm 1.8V~3V LED Emitter Red (20-Pack)

US$2.35

(1 Reviews)

12mm 1.8V~3V Yellow LED Emitters (20-Pack)

12mm 1.8V~3V Yellow LED Emitters (20-Pack)

US$3.15

(1 Reviews)

Water-tight O-Ring Seal (22mm x 1.5mm 20-Pack)

Water-tight O-Ring Seal (22mm x 1.5mm 20-Pack)

US$1.94

(1 Reviews)

Flashlight Parts and Tools

26.5mm Smooth Aluminum Drop-in Module Set (without Emitter)

26.5mm Smooth Aluminum Drop-in Module Set (without Emitter)

US$2.85

(16 Reviews)

Flashlight Parts and Tools

8mm 1.8V~3V LED Emitter Orange (20-Pack)

8mm 1.8V~3V LED Emitter Orange (20-Pack)

US$2.29

(3 Reviews)

Clicky Switch for Flashlights (12mm 5-Pack)

Clicky Switch for Flashlights (12mm 5-Pack)

US$1.83

(8 Reviews)

12.5mm Mini Secondary Optics (Plastic / 20-Pack)

12.5mm Mini Secondary Optics (Plastic / 20-Pack)

US$2.79

(6 Reviews)

53mm*30mm Aluminum Textured/OP Reflector for Cree XR-E Emitters

53mm*30mm Aluminum Textured/OP Reflector for Cree XR-E Emitters

US$4.49 US$4.25

(2 Reviews)