DealExtreme New Arrivals of Hardware Electronics and Tools

5V 30A C-type Opto-isolated Relay Module - Blue

SKU #: 214657, Price: US$4.50 free shipping

Brand	N/A
Model	N/A
Quantity	1
Color	Blue
Material	The PCB + plastic + iron
Features	On-board EL817 optocoupler, with optical isolation and strong anti-jamming capability; Onboard 5V, 30A/250VAC, 30A/30VDC relay, relay has long life of continuous pull 100,000 times;
Specification	Can be directly and single-chip I / O link with the output signal indicates; Has a freewheeling diode protection, short response time; Has a normally open (NO), normally closed (NC) output
Application	For your DIY project
English Manual/Spec	Have
Packing List	1 x C type replay module

Add To Cart Add To Wish List

GY-273 HMC5883L 3-Axis Magnetic Electronic Compass - Blue (3~5V)

SKU #: 214312, Price: US$4.20 free shipping

Brand	N/A
Model	GY-273
Quantity	1
Color	Blue
Material	The PCB + plastic + iron
Features	Chipset: HMC5883L;
Specification	Power supply :3~5V; Communication: IIC communication protocol; Measuring range: ± 1.3~8 Gaussian
Application	For your DIY project
English Manual/Spec	Have
Packing List	1 x GY-273 HMC5883L module 1 x 5 pin 2.54mm pitch header

Add To Cart Add To Wish List

Meeeno Simplify Kit for Arduino Starter Beginner - Multicored

SKU #: 214474, Price: US$30.10 free shipping

Brand	Meeeno
Model	Meeeno Simplify Arduino Starter Kit
Quantity	1
Color	Multicolored
Material	FR4
Features	Meeeno Arduino Starter Kit ,based on Mike McRoberts'book ; This book will guide you, step by step, through using the Starter Kit to learn about the Arduino hardware, software and general electronics theory. Through the use of electronic projects we will take you from the level of complete beginner through to having an intermediate set of skills in using the Arduino.
Specification	The purpose of this book and the kit is to give you a gentle introduction to the Arduino, electronics and programming in C and to set you up with the necessary skills needed to progress beyond the book and the kit into the world of the Arduino and microcontroller electronics; We hope you enjoy using the kit and get satisfaction from creating the projects and seeing your creations come to life.
Application	Arduino teaching, DIY projects, open source program, single chip processor learning and experiment.
English Manual/Spec	Yes (E-file)
Packing List	1 x Meeeduino UNO 1 x Panel 1 x Mini USB cable (22cm) 1 x Piezo sounder (5cm) 10 x R Clear LED 10 x G Clear LED 10 x B Clear LED 5 x Buttons 5 x 1N4001 Diodes 1 x 3-Way Terminal Block 1 x Light sensor 1 x Motor 10 x 100 10 x 150, 10 x 240 10 x 470 10 x 1K, 10 x 1.5K 10 x 1MR 12 x Jumper wires (10cm-cable) 10 x Red LED 10 x Green LED 10 x Blue LED 1 x Plastic box

Add To Cart Add To Wish List

TrustFire 900mAh 1.2V AAA Ni-MH Rechargeable Battery w/ Case (4 PCS)

SKU #: 214746, Price: US$7.70 free shipping

Brand	TrustFire
Color	Blue + white
Quantity	4
Type	Ni-MH
Model	AAA
Mark Capacity	900mAh
Actual Capacity	900mAh
Battery Voltage	1.2 V
Rechargeable	Yes
Rechargeable Times	300
Buitl-in Protected Circuit	No
Over Voltage Protection	No
Short-circuit Protection	No
Over-charging Protection	No
Over-discharging Protection	No
Mercury Free	Yes
Application	Battery products power supply
Packing List	4 x AAA batteries 1 x Battery box

Add To Cart Add To Wish List

Coolook AA 3.2V 700mAh Rechargeable LiFePO Battery - Black + White (2 PCS)

SKU #: 214563, Price: US$5.00 free shipping

Brand	Coolook
Color	Black + white
Material	Lithium iron phosphate
Quantity	2
Type	Lithium Ion
Model	AA
Mark Capacity	700mAh
Actual Capacity	600mAh
Battery Voltage	3.2 V
Rechargeable	Yes
Rechargeable Times	2000
Buitl-in Protected Circuit	No
Over Voltage Protection	No
Short-circuit Protection	No
Over-charging Protection	No
Over-discharging Protection	No
Mercury Free	Yes
Application	Digital camera, DV, electric toys, MP3 players, game consoles, razor, blood pressure monitor, remote control, universal meter, wireless alarm equipment, wireless door bell, wireless headset, wireless mouse, MP3, MD, repeater, flashlight, speaker, walkman, radio, and medical instruments
Packing List	2 x Batteries

Add To Cart Add To Wish List

HT-314B Impact Punch Down Tool

SKU #: 214016, Price: US$6.70 free shipping

Brand	N/A
Model	HT-314B
Quantity	1
Color	Orange red + black
Material	Plastic housing
Features	With adjustable impact pressure control; The storage on the top of tool is for storing one piece of spare blade; Blades are interchangeable and reversible
Application	For seating wire into terminal block or cut off wire end after terminated
Packing List	1 x Punch down tool

Add To Cart Add To Wish List

J1 Electric Cigarette Machine - Blue

SKU #: 214262, Price: US$19.40 free shipping

Brand	N/A
Model	J1
Quantity	1
Color	Blue
Material	ABS
Features	Auto cigarette maker with AC power supply, you can make cigarette by yourself easily, it's fast, economic and safe; With tobacco, you can make a box of cigarettes within a couple of minutes
English Manual/Spec	Yes
Packing List	1 x Electric cigarette machine 1 x English manual 1 x 100~240V US plug power adapter (90cm) 1 x Brush

Add To Cart Add To Wish List

V102 DIY Heart Shaped LED Flash Light Kits - Green + White

SKU #: 214029, Price: US$4.80 free shipping

Brand	N/A
Model	V102
Quantity	1
Color	Green + white
Material	PCB + plastic
Specification	Power: DC 3~6V, with 18-LED divided into 3 groups to form a heart shape; Drived by triode oscillating circuit which makes 18 LEDs flash clockwise one by one
Features	Heart shaped LED flash
Application	Electric DIY lover, good for expressing your love.
English Manual/Spec	No
Packing List	1 x PCB board 3 x 4.7ohm electrical resistors 3 x 100ohm electrical resistors 3 x 47uF electrolytic capacitors 3 x 9013 triodes 18 x 5mm red LED 1 x 2 pin connector

Add To Cart Add To Wish List

Stackable SD / TF Card Expansion Board - Blue + Black

SKU #: 214247, Price: US$8.60 free shipping

The SD card shield adds storage to your Arduino project. It supports SD, SDHC, or MicroSD TF cards. It just uses the SPI ports of Arduino,and you can plug more other shield on it.

Features
Arduino and Iteaduino compatible
SD card, Micro SD card and SDHC cardsupportable
Prototype expand
Arduino Library support

Compatible Mainboard
Arduino Deumlanove/UNO
Arduino MEGA
Arduino Nano
Iteadmaple
Iteaduino
Iteaduino ADK
Iteaduino BT
Iteaduino MEGA 2560
Simple Cortex
Seeeduino
Seeduino MEGA

Shield Functions
Prototype
Storage

Operation Level Digital 5V

Add To Cart Add To Wish List

PAM8403 Dual Channel Mini Digital Audio Amplifier Board w/ Volume Control - Black + Green + Blue

SKU #: 214329, Price: US$5.20 free shipping

Brand	N/A
Model	PAM8403
Quantity	1
Color	Black + green + blue
Material	Copper Clad Laminate (CCL)
Features	3W x 2 stereo class D audio amplifier
Specification	In-board ENC-03M single axis gyro sensor; Supports 2.7~5.25V voltage input; Common pin has been lead out, pin is 100mil (2.54mm), convenient for lattice board; Size: 30 x 30mm; Working voltage: 5V
Application	Mini digital amplifier board
English Manual/Spec	Yes
Packing List	1 x Amplifier board

Add To Cart Add To Wish List

5-Digit LED Display Digital Voltmeter Module - Black + Green (DC 0-33.000V)

SKU #: 214228, Price: US$8.00 free shipping

Brand	no
Model	042404
Quantity	1
Color	Black + Green
Material	Electronic Components
Features	Digital Voltmeter Module
Specification	Measuring range: DC 0-33.000V; Display: 5-digit 0.36 LED; Display color: Red; Refresh rate: More than 5 times per seconds; Measuring accuracy: +/-(0.3%+2 digit); Independent Power supply: DC3.5-30V; Working temperature: ~10~65'C; temperature coefficient: Less than 25PPM/'C
Application	Digital Voltmeter Module
English Manual/Spec	Yes
Packing List	1 x Digital Voltmeter Module

Add To Cart Add To Wish List

FB FB-15 4 x AA/AAA Battery Charger Ni-MH Ni-Cd Batteries- White + Black

SKU #: 214587, Price: US$3.80 free shipping

Brand	FB
Model	FB15
Color	White + black
Quantity	1
Charging Battery Type	AA/AAA
Charging Battery Qty	2
Plug Type	US Plug
Input Voltage	100~240 V
Output Voltage	1.4 V
Output Current	200 mA
Material	Plastic + metals
Other Features	4 independent charging channels provide hassle-free operation, mix and match your batteries and charge them at the same time; Takes 10 hours to charge 2000mAh battery
Packing List	1 x Charger

Add To Cart Add To Wish List

UNI-T UTD2102CM Digital 7" TFT LCD 1GS/S 2-Channel Storage Oscilloscope - Grey

SKU #: 214113, Price: US$571.00 free shipping

Brand	UNI-T
Model	UTD2102CM
Quantity	1
Color	Grey
Material	ABS
Features	Waveform capture rate is up to 150,000wfms / s
Special Functions	One key copy, menu hidden
Application	Test frequency
LCD Display	7" TFT
Display Resolution	800x 480
Analog bandwidth	100MHz
Max sample rate	1GS/S
Vertical sensitivity	2mV/div~10V/div
Display Language	Simplified Chinese, Traditional Chinese, English, German, Russian
Other Data	Rise time: <= 3.5ns; Storage depth: 16Mpts; Waveform capture rate: >=150,000wfms / s; Time base range (s/div): 2ns/div~50s/div; Storage: Setups, bitmap, Waveforms, CSV; Trigger modes: Edge, pulse, video, slope rate, alternate; Interface USB device, USB host, Pass/Fail
Power Supply	100~240VAC, 40~440Hz
Certification	CE
Packing List	1 x Oscilloscope 2 x Probes (1:1, 10:1, cable: 141cm) 1 x Power cable (180cm, 3-flat-pin plug) 1 x USB cable (150cm) 1 x CD 1 x English user manual 8 x Rings 1 x Grounding spring 1 x Bar 2 x Covers

Add To Cart Add To Wish List

3X 6X Folding Rotatable Desktop Magnifier w/ 2-LED White Light + Scale - White + Silver

SKU #: 214102, Price: US$17.60 free shipping

Brand	N/A
Model	No
Quantity	1
Color	White + silver
Material	ABS + stainless steel + optical lens
Magnification	Big: 3X, small: 6X
Certification	CE
Other Data	Diameter of big magnifier: 130mm, small magnifier: 25mm; Clear and precise, foldable, angle and height are adjustable; Can be rotate at 180 degree; 2-LED white light; Powered by 3 x AAA batteries, not included; Suitable for home use, outdoor research, industrial electronic, medicine and valuable items evaluation, such as emeralds, money, jewelery, jade, ceramic, bronze, stamp & curio evaluation; Portable, fine and elegant workmanship; Great hand feeling
Packing List	1 x Magnifier

Add To Cart Add To Wish List

MY3J Mini 3A 150VAC Electromagnetic Relay - Black + Translucent Blue

SKU #: 214713, Price: US$3.60 free shipping

Brand	No
Model	MY3J
Quantity	1
Color	Translucent blue + black
Material	Plastic + aluminium alloy
Specification	Contact form: 3Z, 3H, 3D; Contact capacity: 5A/240VAC 28VDC ; Coil power: DC0.9WAC1.2V; Coil specification: DC6V~220VAC6V~380V
Features	It is used in circuit of automatic control system
Application	It play a role in automatic adjustment , safety protection, conversion circuit
English Manual/Spec	No
Packing List	1 x Relay

Add To Cart Add To Wish List

SK3110 Digital 30W Temperature Controller - White

SKU #: 214626, Price: US$22.20 free shipping

Brand	N/A
Model	SK3110
Quantity	1
Color	White
Material	Plastic
Features	Control the temperature
English Manual/Spec	Yes
Other	Temperature control range: 0~60'C; Heating current: 10A; Power: 30W; Cooling current: 5A; Power: 30W
Packing List	1 x Temperature controller

Add To Cart Add To Wish List

KA2284 Power Level Indicator Module - Blue (3.5~12V)

SKU #: 213906, Price: US$3.60 free shipping

Brand	N/A
Model	KA2284
Quantity	1
Color	Blue
Material	PCB + plastic + iron
Features	Chipset: KA2284; Voltage: 3.5V~12V
Specification	Adjustable span of power level; AC and DC signals can be controlled by jumper
Application	For DIY project
English Manual/Spec	Have
Packing List	1 x KA2284 power level indicator module

Add To Cart Add To Wish List

Electronic Building Blocks Button Module for Arduino

SKU #: 214251, Price: US$3.20 free shipping

Features
1. Plug and play, easy to use. Compatible with the mainstream 2.54 interfaces and 4-Pin Grove interfaces in the market.

2. With use of M4 standard fixed holes, compatible with M4-standard kits such as Lego and Makeblock

3. Hardware with debouncing function for more stable output

Note 1 S for digital output port, V and G for voltage at the common collector and ground respectively. Generally speaking, digital output is VCC; when the button is pressed down, the digital output is 0V.

PCB size :36.0mm X 14.0mm X 1.6mm
Working voltage :3.3 or 5V DC
Operating voltage: 3.3 or 5V DC
Compatible interfaces: 2.54 3-pin interface and 4-pin Grove interface(1)

Add To Cart Add To Wish List

Electronic Bricks Buzzer Module for Arduino

SKU #: 214258, Price: US$3.70 free shipping

Brand	N/A
Model	N/A
Quantity	1
Color	Blue + white
Material	PCB
Features	Plug and Play, easy to use.Compatible with the mainstream 2.54 interfaces and 4-Pin Grove interfaces in the market; With use of M4 standard fixed holes, compatible with M4-standard kits such as Lego and Makeblock; With separation circuit to prevent damages to I/O port
Specification	Working voltage: 5V DC; 3-Pin / 4-Pin interface
Application	Buzzer module
English Manual/Spec	Yes
Packing List	1 x Buzzer module

Add To Cart Add To Wish List

Full Color RGB LED Lattice Screen for Arduino

SKU #: 214252, Price: US$21.80 free shipping

Overview:
Colorsduino is a magic RGB LED dot-matrix driver compatible with Arduino . Colorsduino pairs the M54564 with a single DM163 constant current driver. By using the DM163, Colorduino gains three 8+6-bit channels of hardware PWM control of the LEDs freeing up the MCU from having to implement it in software. This gives the ATmega328 more CPU bandwidth for performing other tasks. Colorduino is easy to cascade by IIC and Power interface.

Features
8bits colors support with 6bits correction for each color in every dots
Hardware 16MHz PWM support
Without any external circuits, play and shine
Dedicated GPIO and ADC interface
Hardware UART and IIC communication with easy cascading
24 constant current channels of 100mA each
8 super source driver channels of 500mA each

Microcontroller:ATMega328P
Max Frequency :16M
RAM Capacity :2K
FLASH Capacity :32K
External Resources :No
Power Supply: 5V-7V DC(7.5V Max)
I/O Operation Level: 5V

Add To Cart Add To Wish List

Electronic Bricks Single Channel Relay Module for Arduino - Blue

SKU #: 214248, Price: US$5.10 free shipping

Brand	N/A
Model	N/A
Quantity	1
Color	Blue + black
Material	PCB
Features	Compatible with electronic bricks and sensor extension board
Specification	Interface: 3-Pin / 4-Pin; Voltage: 5V; Electronic brick of relay can be connected to digital I/O port, when the input of S port is low level, relay will be under disconnect state; when the input of S port is high level, relay will be under connect state. It can be connected in series to the LED lights, buzzer or even the loop of a small lamp so as to control the state of the switch.
Application	Arduino electronic bricks
English Manual/Spec	Yes
Packing List	1 x Module

Add To Cart Add To Wish List

Meeeno DS1307 Real-time Clock Brick Module for Arduino - Yellow (Works with official Arduino Boards)

SKU #: 213941, Price: US$3.00 free shipping

Brand	Meeeno
Model	DS1307
Quantity	1
Color	Yellow + silver
Material	FR4
Features	It is based on the clock chip DS1307; The clock / calendar provides seconds, minutes, hours, day, date,month, and year information; The end of the month date is automatically adjusted for months with fewer than 31 days, including corrections for leap year; This is low power consumption and with 56 byte NVRAM all BCD code clock / calendar real-time clock chip, site and data is transmitted by two lines two-way serial bus; The chip is built-in power supply induction circuit, with power failure detection and battery switchover function
Specification	Real-time clock (RTC) counts seconds, minutes, hours, date of the month, month, day of the week, and year with leap-year compensation valid up to 2100; 56-byte, battery-backed, nonvolatile (NV) RAM for data storage; I2C serial interface (IIC communication); DC 5V supply; Programmable; Square-wave output signal; Automatic power-fail detect and switch circuitry; Consumes Less than 500mA in battery-backup mode with oscillator running; Working temperature: -40'C~80'C; Power supply needs: 5V and 3.3V; Interface type: Digital; Pin Definition: 1-GND 2-VCC 3-SCK 4-SDA 5-INT
Application	Arduino teaching, DIY project, singlechip learning and experiment
English Manual/Spec	Yes (electronic format)
Other	A product for Arduino that works with official Arduino boards
Packing List	1 x Module 1 x CR1220 battery

Add To Cart Add To Wish List

Meeeno HS0038 IR Receiver Electronic Building Block Module Board for Arduino - Yellow + Black

SKU #: 214324, Price: US$2.10 free shipping

Brand	Meeeno
Model	No
Quantity	1
Color	Yellow + black
Material	FR4
Features	A simple IR receiver module; Mainly receive IR signal through HS0038 IR diode, which is sensitive to IR signal; Can be used in products w/ IR remote controller and IR transmitting
Specification	Three wires connector; Input: 5V, GND.S is checking pin; Working voltage: DC 5V
Application	A products for Arduino that works with official Arduino boards; Suitable for Arduino teaching, DIY program development, open source program, SCM learning and experiment; Suitable for students, professional engineer and DIY developers
English Manual/Spec	Yes (E-format)
Packing List	1 x Module

Add To Cart Add To Wish List

Meeeno Adjustable Version Flame Sensor Brick for Arduino

SKU #: 214242, Price: US$3.00 free shipping

Brand	Meeeno
Model	N/A
Quantity	1
Color	Yellow
Material	FR4
Features	Used for detecting fire source or making simple firefighting robot and fire alarm, etc; Sensitivity adjustable; Output form: Digital switching value output 0-1
Specification	Power supply needs: 5V; Interface type: Digital; Pin Definition: 1-Signal, 2-VCC, 3-GND; IR sensor working temperature: -25'C to 85'C
Application	Used for Arduino teaching, DIY project development, single chip learning, etc.
English Manual/Spec	Yes
Packing List	1 x Module

Add To Cart Add To Wish List

Meeeno 3x3 Independent Digital Keypad for Arduino (Works with official Arduino Boards)

SKU #: 214126, Price: US$5.60 free shipping

Brand	Meeeno
Model	3x3 Keypad
Quantity	1
Color	Orange + black
Material	FR4
Features	Bridge lite is a 3 x 3 key-pad shield with a 5110 Graphic LCD interface. It is compatible with Arduino, you can plug it on Arduino board directly, and you can get the small development platform with keypad input and Graphic LCD display.
Specification	Voltage: 5V; The shield comes with the 9 buttons but without 5110 Graphic LCD.
Application	Great for DIY project
English Manual/Spec	Yes
Packing List	1 x Keyboard

Add To Cart Add To Wish List

Meeeno Simple Sound Sensor Brick Module for Arduino - Orange (Works with official Arduino Boards)

SKU #: 213985, Price: US$2.30 free shipping

Brand	Meeeno
Model	Simple sound sensor brick
Quantity	1
Color	Orange
Material	FR4
Features	Simple sound sensor brick is a microphone sound sensor module; The sound sensor is very sensitive to sound, can be used to detect the sound intensity of the ambient environment, but it cannot identify the Size of the sound and the frequency; Suitable for making sound sensor control switch
Specification	3-pin connector, input: 5V-GND, S-pin is detection pin; Working voltage: DC 5V
Application	Arduino teaching, DIY project, singlechip learning and experiment
English Manual/Spec	Yes (electronic format)
Other	A product for Arduino that works with official Arduino boards.
Packing List	1 x Simple sound sensor brick module

Add To Cart Add To Wish List

Meeeno Mercury Switch Sensor Brick for Arduino

SKU #: 214087, Price: US$2.70 free shipping

- Brand: Meeeno
- Power supply: 5V
- Interface type: Analog
- Pin definition: 1-Signal, 2-VCC, 3-GND
- Fast response and high sensitivity
- Simple drive circuit
- Stable and long life
- Great for Arduino teaching, DIY project, MCU learning, etc.

Add To Cart Add To Wish List

Meeeno Infrared Transmitter Brick for Arduino - Orange (Works with official Arduino Boards)

SKU #: 213967, Price: US$2.20 free shipping

Brand	Meeeno
Model	Infrared transmitter brick
Quantity	1
Color	Orange
Material	FR4
Features	This is simple infrared transmitter brick module, transmit the infrared signal via IR light-emitting diodes; Can be used with infrared transmitter and receiver module
Specification	3-pin connector, input: 5V-GND, S-pin is detection pin; Working voltage: DC 5V
Application	Arduino teaching, DIY project, singlechip learning and experiment
English Manual/Spec	Yes (electronic format)
Other	A product for Arduino that works with official Arduino boards.
Packing List	1 x Infrared transmitter brick module

Add To Cart Add To Wish List

4-Channel Infrared Tracking Sensor Module Line Hunting Sensor - Red

SKU #: 214084, Price: US$11.50 free shipping

- Color: Red
- Material: PCB
- Working voltage: DC 3.3~5V
- Working current: Above 1A power supply
- Working temperature: -10'C~50'C
- Installation hole diameter: M3 screw
- Detection distance: 1mm to 60 CM adjustable, the closer the distance,the more stable performance, and white reflection farthest
- Output interface: 6 wire system
- Output signal: TTL level (Can connect I/O single chip directly, induct reflected IR light from infrared sensor, then red indicator will be on, output low level; Without IR light, red indicator is off, output high level)
- Comes with 18 x Dupont cables (20cm), 4 x plates, and English manual

Add To Cart Add To Wish List

Meeeno DHT11 Electronic Bricks Temperature Humidity Sensor Module - Orange

SKU #: 214232, Price: US$3.70 free shipping

Brand	Meeeno
Model	N/A
Quantity	1
Color	Yellow
Material	FR4
Features	This brick includes a DHT11 Temperature & humidity sensor, its features a temperature & humidity sensor complex with a calibrated digital signal output. By using the exclusive digital-signal-acquisition technique and temperature & humidity sensing technology, it ensures high reliability and excellent long-term stability.
Specification	3 Wires electronic bricks interface; Input: 5V GND; S signal output
Application	Great for Arduino teaching, DIY project development, single chip learning, etc.
English Manual/Spec	Yes
Packing List	1 x Module

Add To Cart Add To Wish List

Funduino Atmega-328p DIY Maker Learning Kit for Arduino (Works with official Arduino Boards)

SKU #: 213324, Price: US$53.00 free shipping

Brand	Funduino
Model	N/A
Quantity	1
Color	Blue
Material	RF4
Features	MCU development learning.
Specification	The Funduino Uno is a microcontroller board based on the ATmega328; Use Funduino Uno development board, and with ATMega8U2 MCU chip on USB to Serial interface circuit part.
Application	Various experiments including LED flashing, advertisement flowing water light, key control LED, PWM regulating light brightness, traffic light design, answer devices, buzzer, etc.
English Manual/Spec	Yes
Packing List	1 x Funduino UNO board 1 x Expansion board 1 x Big bread board 5 x Red LEDs 5 x Blue LEDs 5 x Yellow LEDs 5 x 10K resistors 8 x 220R resistors 1 x 74hc595 (IC) 2 x Buzzer 1 x Seven-segment display (1digit) 1 x Seven-segment display (4 digit) 10 x Big button reverse click switch 4 x Small button reverse click switch 3 x Photoresistance 1 x Potentiometer 1 x LM35 temperature sensor 1 x 2.6" 1602 LCD display 1 x PS2 joystick 1 x Step motor (24cm-cable) 1 x Step motor driver 1 x Relay 1 x 9g servo 1 x RGB module 30 x Jumper wires for breadboard(23cm/11cm) 10 x Dupont lines (20cm) 1 x 40 pin pin header 2 x Tilt switches 1 x Flame sensor 1 x Infrared receiver 1 x USB cable (52cm) 1 x Remote controller (2 x AG10, included) 1 x 6-AAA battery holder (17cm-cable) 1 x English user manual

Add To Cart Add To Wish List

Meeeno Two-Color Common Anode LED Brick for Arduino (Works with official Arduino Boards)

SKU #: 214211, Price: US$2.20 free shipping

Brand	Meeeno
Model	N/A
Quantity	1
Color	Yellow
Material	FR4
Features	Adopt vaporific common anode; With red / green colors;
Specification	3 wires electronic bricks interface; Input: 5V-G-R (low level lights up, high level lights off)
Application	Great for Arduino teaching, DIY project development, single chip learning, etc.
English Manual/Spec	Yes
Packing List	1 x Module

Add To Cart Add To Wish List

Meeeno ACS712 Current Measuring Sensor Brick Module Board for Arduino - Yellow + Blue

SKU #: 214330, Price: US$5.00 free shipping

Brand	Meeeno
Model	ACS712 Current Sensor Brick
Quantity	1
Color	Yellow + blue
Material	FR4
Features	Can measure current value of +/-30A; High precision; Adopts a design that reduce electromagnetic interference and improve measuring precision
Specification	Related analog output: 66mA/V; Output voltage when does not measuring current: VCC/2
Application	A product for Arduino that works with official Arduino boards; Pin Definition: 1-Signal 2-VCC 3-GND; Fast response and high sensitivity; Simple drive circuit; Stable and long life; Suitable for students, professional engineer and DIY program developers; Can be used for Arduino teaching, open source program, SCM learning and experiment
English Manual/Spec	Yes (E-format)
Packing List	1 x Current sensor board

Add To Cart Add To Wish List

Meeeno Sound Sensor Brick Module for Arduino - Yellow

SKU #: 214313, Price: US$3.20 free shipping

Brand	Meeeno
Model	Sound Sensor Brick
Quantity	1
Color	Yellow
Material	FR4
Features	Sound sensor brick is a kind of sound sensor module with Mic head; It is very sensitive to the sound intensity, can used to test sound intensity of surrounding environment, but can not identify loudness and frequency
Specification	Connector input: 5V; Working voltage: DC 5V; Adjustable sensitivity; With indicator lamp, lights on when have output signal; Pin Definition: 1-Signal 2-VCC 3-GND; Fast response and High sensitivity; Simple drive circuit; Stable and long life
Application	Arduino education; DIY project development, MCU experiment
English Manual/Spec	Yes (E-file)
Packing List	1 x sound sensor brick

Add To Cart Add To Wish List

2X / 4X Desktop 2-LED White Light Magnifier w/ Flexible Neck + Clip - Silver (4 x LR1130)

SKU #: 214092, Price: US$16.90 free shipping

Brand	N/A
Model	No
Quantity	1
Color	Silver
Material	ABS + optical glass + LED
Magnification	2X / 4X
Other Data	Main magnifier diameter: 108mm, magnification: 2X; Subsidiary magnifier diameter: 24.8mm, magnification: 4X; Direction and height are adjustable; Also can remove the base and take it as a handheld magnifier; Powered by 4 x LR1130 cell batteries; Suitable for office, hospital, school, printing, home and machine
Certification	CE
Packing List	1 x Magnifier 1 x White pouch 4 x LR1130 batteries

Add To Cart Add To Wish List

JACKLY JK6036 31-in-1 Precision Electron Screwdriver Head Set w/ Anti-Slip Handle

SKU #: 213351, Price: US$5.80 free shipping

Brand	JACKLY
Model	JK-6036
Quantity	1
Color	Red + yellow + black + silver
Material	CR-V
Screw Head Type	All In One
Application	Good for cell phones, watches and other electrical appliances disassemble and maintenance.
Keywords	screwdrivers
Other	Philip's head screwdrivers: 1.7/2.0/2.5/3.0/3.5; Slot head screwdrivers: 1.5/2.0/2.5/3.0/3.5; Hex socket head screwdrivers: H1.3/H1.5/H2.0/H2.5/H3.0/H4.0; Torx screwdriver: T3/T4/T5/T6/T7/T8/T9/T10/T15/T20; TA 3.0 screwdriver; Y3.0 screwdriver; Pentalobe 2.0 screwdriver; U2.6 screwdriver
Packing List	1 x Anti-slip handle 30 x Screwdriver heads

Add To Cart Add To Wish List

JIA-XIN-TDS Tester w/ Calibration Solution - Blue (0~1999ppm / 1ppm)

SKU #: 213620, Price: US$15.60 free shipping

- Model: JIA-XIN-TDS
- Color: Blue
- Material: Plastic
- Measure range: 0~1999ppm(mg/l)
- Resolution: 1ppm(mg/l)
- Accuracy: +/- 2%F.S
- Power supply: 2 x 3V (2 x CR2032)
- Immerse the meter in the distilled water. Activate it about some hours
- Immerse the meter in 1382ppm(mg/l) calibration solution (at 25'C), and stir it gently
- Allow the reading to stabilize and with a small screwdriver tun the calibration trimmer until the display shows "1382ppm"
- Rinse the electrode with distilled water and suck it with tissue paper
- Replace the protective cap, the calibration is now complete
- Packing List:
- 1 x TDS tester
- 1 x 1382ppm 25'C calibration solution
- 1 x Screwdriver
- 1 x Chinese / English manual

Add To Cart Add To Wish List

2 9G Servos Bracket Sensor Mount Pan / Tilt Kit for Gyro - Translucent Blue

SKU #: 214081, Price: US$15.20 free shipping

Brand	N/A
Model	VRS002B
Quantity	2
Color	Translucent blue
Material	Aluminum alloy + ABS
Specification	Angular velocity: 0.1s/60 degree; Voltage: 4.8~6V; Torque: 1.5kg; Rotary angle: Turn to left / right at 90 degree; Wire connection: White: pulse signal cable, red: positive, black: grounding
Features	DIY accessories; Can install camera or IR array on the bracket
Application	Can achieve pan and tilt function
English Manual/Spec	Yes
Packing List	2 x Brackets 2 x 9g miniature servos (18cm cable) 1 x English user manual 1 x Pack of accessories

Add To Cart Add To Wish List

TIANBO MY2-H 5A 24V Electromagnetic Relay - Black + Transparent

SKU #: 213654, Price: US$3.10 free shipping

Brand	TIANBO
Model	MY2-H
Quantity	1
Color	Transparent + black
Material	Silver alloy
Specification	5A / 250VAC
Features	Control circuitry
Application	Play a role in automatic adjustment, safety protection and circuit conversion
English Manual/Spec	Yes
Packing List	1 x Relay

Add To Cart Add To Wish List

UNI-T UTD2102CEX Digital 7" TFT LCD 2-Channel Storage Oscilloscope - White + Grey

SKU #: 214680, Price: US$388.60 free shipping

Brand	UNI-T
Model	UTD2102CEX
Quantity	1
Color	White + grey
Material	ABS
Features	100MHz bandwidth, 1G sampling rate
Special Functions	2-Channel
Application	Test frequency
LCD Display	7inch 64K color TFT LCD
Display Resolution	800 x 480
Analog bandwidth	100MHz
Max sample rate	1G
Sample memory depth	25kpts
Vertical sensitivity	1mV/div~20V/div
Display Language	Chinese, Traditional Chinese, Portuguese. Spanish, Russian, Dutch, English, German, French
Other Data	Rise time: <= 3.5ns; Waveform capture rate: 2000wfms / s; Time base range (s / div): 2ns/div~50s/div; Storage: Setups, BMP, Waveforms; Trigger modes: Edge, Pulse, alternate; Interface USB OTG; Dual analog channel, mV/div~20V/div, a wide measurement range; Unique screen copy function; Support for plug-and-play USB storage equipment, and computer via USB communication and remote control system; To upgrade system software via USB flash drive; Waveforms, setups and bitmap stored waveforms and settings reproduction; Automatic measurement 28 kinds of waveform parameters; Unique waveform record and replay function.
Power Supply	100~240V, 40~440Hz
Certification	CE
Packing List	1 x Digital storage oscilloscope 2 x Probes (1:1 and 10:1 can be switched) 1 x Power cable (160cm) 1 x USB cable (140cm) 1 x CD 1 x English user manual 1 x Bag of parts

Add To Cart Add To Wish List

HG140 150W Aluminum Alloy + Plastic Air Blower Heater - Black

SKU #: 213250, Price: US$33.80 free shipping

Brand	No
Model	HG140 150W
Quantity	1
Color	Black
Material	Plastic + aluminum alloy
Features	Voltage: AC / DC 110~250V; Suitable for heating air blower and fan, etc.
English Manual/Spec	Yes
Packing List	1 x Heater 1 x English user manual

Add To Cart Add To Wish List

Wave Style Plastic Handle Stainless Steel Scraper Decoration Tool - Silver + Black

SKU #: 213400, Price: US$9.20 free shipping

Brand	N/A
Model	N/A
Quantity	1
Color	Black + silver
Material	Plastic + stainless steel
Features	Lightweight, handheld, convenient to carry and use
Application	Thickness: 0.1mm; Great for home decoration; Scraper tool, use for jointing, screeding, and other home decoration
Packing List	1 x Scraper

Add To Cart Add To Wish List

Talent NO.1104 Home Decoration Painting Rolling Brush Refill - White + Yellow (10 PCS)

SKU #: 213630, Price: US$8.50 free shipping

Brand	Talent
Model	NO.1104
Quantity	10
Color	White + yellow
Material	Fleece
Features	To brush wall and re-decor home
Application	Ideal for all paints on all walls
Packing List	10 x Refills

Add To Cart Add To Wish List

Meeeno Track Sensor Brick Module for Arduino - Orange (Works with official Arduino Boards)

SKU #: 213949, Price: US$2.80 free shipping

Brand	Meeeno
Model	Track sensor brick
Quantity	1
Color	Yellow
Material	FR4
Features	The track sensor brick is based on TCRT5000 photoelectricity sensitive element; It is sensitive to detect the infrared reflected signal; Works with Arduino sensor expansion board can make black / white light detection, obstacle detection, shredder shredded paper detection, watt hour meter pulse data sampling and other products
Specification	3-pin connector, input 5V-GND, S-pin output digital voltage signal 0~1; Working voltage: 5.0V; TCRT5000 photovoltaic conversion component, with infrared emitting and receiving LED in the component; Emitting LED working current: 10mA; Receiving LED working current: 0.1mA; Indicator light: Signal indicator (track the black line, indicator is on); PCB installation hole: 3.2mm stand copper cylinder, screw; Interface type: Analog; Pin Definition: 1-Signal, 2-VCC, 3-GND; Fast response and High sensitivity; Simple drive circuit; Stable and long life
Application	Arduino teaching, DIY project, singlechip learning and experiment
English Manual/Spec	Yes (electronic format)
Other	A product for Arduino that works with official Arduino boards.
Packing List	1 x Track sensor brick module

Add To Cart Add To Wish List

NE555 Adjustable Frequency Pulser / Impulsator Module - Blue (5~12V)

SKU #: 214047, Price: US$3.50 free shipping

Brand	N/A
Model	NE555
Quantity	1
Color	Blue
Material	Double-side solder coating PCB
Specification	On-board NE555 chip, single-signal output; Output duty ratio is about 50% square wave, on-board adjustable resistance, adjust the value of resistance to control the output frequency, on-board power indicator; Working voltage: 5~12V
Features	On-board adjustable resistance, adjust the value of resistance to control the output frequency
Application	Adjustable frequency pulser / impulsator module
English Manual/Spec	Yes
Packing List	1 x Impulsator module

Add To Cart Add To Wish List

K Type Thermocouple Probe Type Temperature Sensor - Silver Grey

SKU #: 213591, Price: US$4.90 free shipping

Brand	No
Model	N/A
Color	Silver grey
Material	Stainless steel
Quantity	1
Screen Size	N/A
Backlight	No
ºC Temperature range	0~1000 ºC
ºF Temperature range	N/A ºF
Unit	ºC
Keywords	Alcohol Tester
Other Data	Used to measure device temperature; Widely used industrial
Packing List	1 x Temperature sensor (171cm)

Add To Cart Add To Wish List

20906 6mm Silicone Pipe - Translucent White (5.44m-Length)

SKU #: 213648, Price: US$5.80 free shipping

- Model: 20906
- Color: Translucent white
- Material: Silicone
- Outer diameter: 6mm
- Inner diameter: 4mm
- Thickness of pipe: 2mm
- Size: 5m x 0.6cm x 0.6cm
- Temperature range: -65~200'C
- Widely used in water dispensers, coffee pot, water heater, medical equipment, etc.

Add To Cart Add To Wish List

20905 4mm Diameter silicone Tube - White (534cm)

SKU #: 213616, Price: US$4.40 free shipping

Brand	no
Model	20905
Quantity	1
Color	White
Material	Silicone
Specification	Specification: external diameter: 4mm, internal diameter: 2.5mm; Thickness: 1.5mm; Temperature range: -65~200'C
Features	Silicone tube
Application	Widely used in drinking fountains, coffee pot, water heater, electronic devices, medical devices and wine connecting tube
English Manual/Spec	No
Packing List	1 x Silicone tube

Add To Cart Add To Wish List

Car Infrared 4-CH Tracking / Obstacle Avoidance Sensor Module for Ardiuno - Black + Blue

SKU #: 213567, Price: US$5.00 free shipping

Brand	N/A
Model	N/A
Quantity	1
Color	Blue + black
Material	PCB
Features	Obstacle avoidance function: IR transmitting tube of each channel sensor transmit IR continuously, if transmitted IR does not reflected back or reflected strong enough, the receiving tube is still off, TTL output port is in high level, related indicating diode is off; Or TTL output port is in low level and indicating diode is lighted on; Connecting to other sensor: Impedance value of sensor will change as environment; Value become lower and lower till reach to the value that potentiometer need, TTL output is in low level and indicating diode is lighted on
Specification	Working voltage: DC 3.3~5V; Working current: higher than 1A; Working temperature: -10~50'C; Module cable connecting: DO1: Channel 1 TTL output; DO2: Channel 2; DO3: channel 3; DO4: channel 4; GND: negative port; VCC: Positive port; Size: 44 x 30 x 8.5mm
Application	Obstacle avoidance sensor; A product for Arduino that works with official Arduino boards.
English Manual/Spec	Yes (E-format)
Packing List	1 x Obstacle avoidance sensor module

Add To Cart Add To Wish List

DIY Eduino Leonardo Module - Blue + Black

SKU #: 213956, Price: US$14.60 free shipping

Brand	NO
Model	NO
Quantity	1
Color	Blue+Black
Material	PCB
Features	Independant USB-Serial transfer chip, Leonardo adopts single chip solution to realize USB communication and control; Require for Arduino IDE1.01 and above version
Specification	Controller: ATmega32u4; Working frequency:16MHz; Working voltage: 5V; Input voltage (suggested): 7~12V; Digital I/O ports: 20; PWM channel: 7; Analog input: 12; 5V D/A port max. allowable current: 40mA; 3.3V D/A port max. allowable current: 50mA; Flash Memory:32 KB (ATmega32u4) of which 4 KB used by bootloader SRAM: 2.5 KB (ATmega32u4) EEPROM: 1 KB (ATmega32u4)
Application	Arduino DIY project
English Manual/Spec	YES
Packing List	1 x Module

Add To Cart Add To Wish List