DealExtreme New Arrivals of Arduino & Single-Chip Microcomputer DIY Supplies

KA2284 Power Level Indicator Module - Blue (3.5~12V)

SKU #: 213906, Price: US$3.60 free shipping

Brand	N/A
Model	KA2284
Quantity	1
Color	Blue
Material	PCB + plastic + iron
Features	Chipset: KA2284; Voltage: 3.5V~12V
Specification	Adjustable span of power level; AC and DC signals can be controlled by jumper
Application	For DIY project
English Manual/Spec	Have
Packing List	1 x KA2284 power level indicator module

Add To Cart Add To Wish List

Electronic Building Blocks Button Module for Arduino

SKU #: 214251, Price: US$3.20 free shipping

Features
1. Plug and play, easy to use. Compatible with the mainstream 2.54 interfaces and 4-Pin Grove interfaces in the market.

2. With use of M4 standard fixed holes, compatible with M4-standard kits such as Lego and Makeblock

3. Hardware with debouncing function for more stable output

Note 1 S for digital output port, V and G for voltage at the common collector and ground respectively. Generally speaking, digital output is VCC; when the button is pressed down, the digital output is 0V.

PCB size :36.0mm X 14.0mm X 1.6mm
Working voltage :3.3 or 5V DC
Operating voltage: 3.3 or 5V DC
Compatible interfaces: 2.54 3-pin interface and 4-pin Grove interface(1)

Add To Cart Add To Wish List

Electronic Bricks Buzzer Module for Arduino

SKU #: 214258, Price: US$3.70 free shipping

Brand	N/A
Model	N/A
Quantity	1
Color	Blue + white
Material	PCB
Features	Plug and Play, easy to use.Compatible with the mainstream 2.54 interfaces and 4-Pin Grove interfaces in the market; With use of M4 standard fixed holes, compatible with M4-standard kits such as Lego and Makeblock; With separation circuit to prevent damages to I/O port
Specification	Working voltage: 5V DC; 3-Pin / 4-Pin interface
Application	Buzzer module
English Manual/Spec	Yes
Packing List	1 x Buzzer module

Add To Cart Add To Wish List

Full Color RGB LED Lattice Screen for Arduino

SKU #: 214252, Price: US$21.80 free shipping

Overview:
Colorsduino is a magic RGB LED dot-matrix driver compatible with Arduino . Colorsduino pairs the M54564 with a single DM163 constant current driver. By using the DM163, Colorduino gains three 8+6-bit channels of hardware PWM control of the LEDs freeing up the MCU from having to implement it in software. This gives the ATmega328 more CPU bandwidth for performing other tasks. Colorduino is easy to cascade by IIC and Power interface.

Features
8bits colors support with 6bits correction for each color in every dots
Hardware 16MHz PWM support
Without any external circuits, play and shine
Dedicated GPIO and ADC interface
Hardware UART and IIC communication with easy cascading
24 constant current channels of 100mA each
8 super source driver channels of 500mA each

Microcontroller:ATMega328P
Max Frequency :16M
RAM Capacity :2K
FLASH Capacity :32K
External Resources :No
Power Supply: 5V-7V DC(7.5V Max)
I/O Operation Level: 5V

Add To Cart Add To Wish List

Electronic Bricks Single Channel Relay Module for Arduino - Blue

SKU #: 214248, Price: US$5.10 free shipping

Brand	N/A
Model	N/A
Quantity	1
Color	Blue + black
Material	PCB
Features	Compatible with electronic bricks and sensor extension board
Specification	Interface: 3-Pin / 4-Pin; Voltage: 5V; Electronic brick of relay can be connected to digital I/O port, when the input of S port is low level, relay will be under disconnect state; when the input of S port is high level, relay will be under connect state. It can be connected in series to the LED lights, buzzer or even the loop of a small lamp so as to control the state of the switch.
Application	Arduino electronic bricks
English Manual/Spec	Yes
Packing List	1 x Module

Add To Cart Add To Wish List

Meeeno DS1307 Real-time Clock Brick Module for Arduino - Yellow (Works with official Arduino Boards)

SKU #: 213941, Price: US$3.00 free shipping

Brand	Meeeno
Model	DS1307
Quantity	1
Color	Yellow + silver
Material	FR4
Features	It is based on the clock chip DS1307; The clock / calendar provides seconds, minutes, hours, day, date,month, and year information; The end of the month date is automatically adjusted for months with fewer than 31 days, including corrections for leap year; This is low power consumption and with 56 byte NVRAM all BCD code clock / calendar real-time clock chip, site and data is transmitted by two lines two-way serial bus; The chip is built-in power supply induction circuit, with power failure detection and battery switchover function
Specification	Real-time clock (RTC) counts seconds, minutes, hours, date of the month, month, day of the week, and year with leap-year compensation valid up to 2100; 56-byte, battery-backed, nonvolatile (NV) RAM for data storage; I2C serial interface (IIC communication); DC 5V supply; Programmable; Square-wave output signal; Automatic power-fail detect and switch circuitry; Consumes Less than 500mA in battery-backup mode with oscillator running; Working temperature: -40'C~80'C; Power supply needs: 5V and 3.3V; Interface type: Digital; Pin Definition: 1-GND 2-VCC 3-SCK 4-SDA 5-INT
Application	Arduino teaching, DIY project, singlechip learning and experiment
English Manual/Spec	Yes (electronic format)
Other	A product for Arduino that works with official Arduino boards
Packing List	1 x Module 1 x CR1220 battery

Add To Cart Add To Wish List

Meeeno HS0038 IR Receiver Electronic Building Block Module Board for Arduino - Yellow + Black

SKU #: 214324, Price: US$2.10 free shipping

Brand	Meeeno
Model	No
Quantity	1
Color	Yellow + black
Material	FR4
Features	A simple IR receiver module; Mainly receive IR signal through HS0038 IR diode, which is sensitive to IR signal; Can be used in products w/ IR remote controller and IR transmitting
Specification	Three wires connector; Input: 5V, GND.S is checking pin; Working voltage: DC 5V
Application	A products for Arduino that works with official Arduino boards; Suitable for Arduino teaching, DIY program development, open source program, SCM learning and experiment; Suitable for students, professional engineer and DIY developers
English Manual/Spec	Yes (E-format)
Packing List	1 x Module

Add To Cart Add To Wish List

Meeeno Adjustable Version Flame Sensor Brick for Arduino

SKU #: 214242, Price: US$3.00 free shipping

Brand	Meeeno
Model	N/A
Quantity	1
Color	Yellow
Material	FR4
Features	Used for detecting fire source or making simple firefighting robot and fire alarm, etc; Sensitivity adjustable; Output form: Digital switching value output 0-1
Specification	Power supply needs: 5V; Interface type: Digital; Pin Definition: 1-Signal, 2-VCC, 3-GND; IR sensor working temperature: -25'C to 85'C
Application	Used for Arduino teaching, DIY project development, single chip learning, etc.
English Manual/Spec	Yes
Packing List	1 x Module

Add To Cart Add To Wish List

Meeeno 3x3 Independent Digital Keypad for Arduino (Works with official Arduino Boards)

SKU #: 214126, Price: US$5.60 free shipping

Brand	Meeeno
Model	3x3 Keypad
Quantity	1
Color	Orange + black
Material	FR4
Features	Bridge lite is a 3 x 3 key-pad shield with a 5110 Graphic LCD interface. It is compatible with Arduino, you can plug it on Arduino board directly, and you can get the small development platform with keypad input and Graphic LCD display.
Specification	Voltage: 5V; The shield comes with the 9 buttons but without 5110 Graphic LCD.
Application	Great for DIY project
English Manual/Spec	Yes
Packing List	1 x Keyboard

Add To Cart Add To Wish List

Meeeno Simple Sound Sensor Brick Module for Arduino - Orange (Works with official Arduino Boards)

SKU #: 213985, Price: US$2.30 free shipping

Brand	Meeeno
Model	Simple sound sensor brick
Quantity	1
Color	Orange
Material	FR4
Features	Simple sound sensor brick is a microphone sound sensor module; The sound sensor is very sensitive to sound, can be used to detect the sound intensity of the ambient environment, but it cannot identify the Size of the sound and the frequency; Suitable for making sound sensor control switch
Specification	3-pin connector, input: 5V-GND, S-pin is detection pin; Working voltage: DC 5V
Application	Arduino teaching, DIY project, singlechip learning and experiment
English Manual/Spec	Yes (electronic format)
Other	A product for Arduino that works with official Arduino boards.
Packing List	1 x Simple sound sensor brick module

Add To Cart Add To Wish List

Meeeno Mercury Switch Sensor Brick for Arduino

SKU #: 214087, Price: US$2.70 free shipping

- Brand: Meeeno
- Power supply: 5V
- Interface type: Analog
- Pin definition: 1-Signal, 2-VCC, 3-GND
- Fast response and high sensitivity
- Simple drive circuit
- Stable and long life
- Great for Arduino teaching, DIY project, MCU learning, etc.

Add To Cart Add To Wish List

Meeeno Infrared Transmitter Brick for Arduino - Orange (Works with official Arduino Boards)

SKU #: 213967, Price: US$2.20 free shipping

Brand	Meeeno
Model	Infrared transmitter brick
Quantity	1
Color	Orange
Material	FR4
Features	This is simple infrared transmitter brick module, transmit the infrared signal via IR light-emitting diodes; Can be used with infrared transmitter and receiver module
Specification	3-pin connector, input: 5V-GND, S-pin is detection pin; Working voltage: DC 5V
Application	Arduino teaching, DIY project, singlechip learning and experiment
English Manual/Spec	Yes (electronic format)
Other	A product for Arduino that works with official Arduino boards.
Packing List	1 x Infrared transmitter brick module

Add To Cart Add To Wish List

Meeeno DHT11 Electronic Bricks Temperature Humidity Sensor Module - Orange

SKU #: 214232, Price: US$3.70 free shipping

Brand	Meeeno
Model	N/A
Quantity	1
Color	Yellow
Material	FR4
Features	This brick includes a DHT11 Temperature & humidity sensor, its features a temperature & humidity sensor complex with a calibrated digital signal output. By using the exclusive digital-signal-acquisition technique and temperature & humidity sensing technology, it ensures high reliability and excellent long-term stability.
Specification	3 Wires electronic bricks interface; Input: 5V GND; S signal output
Application	Great for Arduino teaching, DIY project development, single chip learning, etc.
English Manual/Spec	Yes
Packing List	1 x Module

Add To Cart Add To Wish List

Funduino Atmega-328p DIY Maker Learning Kit for Arduino (Works with official Arduino Boards)

SKU #: 213324, Price: US$53.00 free shipping

Brand	Funduino
Model	N/A
Quantity	1
Color	Blue
Material	RF4
Features	MCU development learning.
Specification	The Funduino Uno is a microcontroller board based on the ATmega328; Use Funduino Uno development board, and with ATMega8U2 MCU chip on USB to Serial interface circuit part.
Application	Various experiments including LED flashing, advertisement flowing water light, key control LED, PWM regulating light brightness, traffic light design, answer devices, buzzer, etc.
English Manual/Spec	Yes
Packing List	1 x Funduino UNO board 1 x Expansion board 1 x Big bread board 5 x Red LEDs 5 x Blue LEDs 5 x Yellow LEDs 5 x 10K resistors 8 x 220R resistors 1 x 74hc595 (IC) 2 x Buzzer 1 x Seven-segment display (1digit) 1 x Seven-segment display (4 digit) 10 x Big button reverse click switch 4 x Small button reverse click switch 3 x Photoresistance 1 x Potentiometer 1 x LM35 temperature sensor 1 x 2.6" 1602 LCD display 1 x PS2 joystick 1 x Step motor (24cm-cable) 1 x Step motor driver 1 x Relay 1 x 9g servo 1 x RGB module 30 x Jumper wires for breadboard(23cm/11cm) 10 x Dupont lines (20cm) 1 x 40 pin pin header 2 x Tilt switches 1 x Flame sensor 1 x Infrared receiver 1 x USB cable (52cm) 1 x Remote controller (2 x AG10, included) 1 x 6-AAA battery holder (17cm-cable) 1 x English user manual

Add To Cart Add To Wish List

Meeeno Two-Color Common Anode LED Brick for Arduino (Works with official Arduino Boards)

SKU #: 214211, Price: US$2.20 free shipping

Brand	Meeeno
Model	N/A
Quantity	1
Color	Yellow
Material	FR4
Features	Adopt vaporific common anode; With red / green colors;
Specification	3 wires electronic bricks interface; Input: 5V-G-R (low level lights up, high level lights off)
Application	Great for Arduino teaching, DIY project development, single chip learning, etc.
English Manual/Spec	Yes
Packing List	1 x Module

Add To Cart Add To Wish List

Meeeno ACS712 Current Measuring Sensor Brick Module Board for Arduino - Yellow + Blue

SKU #: 214330, Price: US$5.00 free shipping

Brand	Meeeno
Model	ACS712 Current Sensor Brick
Quantity	1
Color	Yellow + blue
Material	FR4
Features	Can measure current value of +/-30A; High precision; Adopts a design that reduce electromagnetic interference and improve measuring precision
Specification	Related analog output: 66mA/V; Output voltage when does not measuring current: VCC/2
Application	A product for Arduino that works with official Arduino boards; Pin Definition: 1-Signal 2-VCC 3-GND; Fast response and high sensitivity; Simple drive circuit; Stable and long life; Suitable for students, professional engineer and DIY program developers; Can be used for Arduino teaching, open source program, SCM learning and experiment
English Manual/Spec	Yes (E-format)
Packing List	1 x Current sensor board

Add To Cart Add To Wish List

Meeeno Sound Sensor Brick Module for Arduino - Yellow

SKU #: 214313, Price: US$3.20 free shipping

Brand	Meeeno
Model	Sound Sensor Brick
Quantity	1
Color	Yellow
Material	FR4
Features	Sound sensor brick is a kind of sound sensor module with Mic head; It is very sensitive to the sound intensity, can used to test sound intensity of surrounding environment, but can not identify loudness and frequency
Specification	Connector input: 5V; Working voltage: DC 5V; Adjustable sensitivity; With indicator lamp, lights on when have output signal; Pin Definition: 1-Signal 2-VCC 3-GND; Fast response and High sensitivity; Simple drive circuit; Stable and long life
Application	Arduino education; DIY project development, MCU experiment
English Manual/Spec	Yes (E-file)
Packing List	1 x sound sensor brick

Add To Cart Add To Wish List

Meeeno Track Sensor Brick Module for Arduino - Orange (Works with official Arduino Boards)

SKU #: 213949, Price: US$2.80 free shipping

Brand	Meeeno
Model	Track sensor brick
Quantity	1
Color	Yellow
Material	FR4
Features	The track sensor brick is based on TCRT5000 photoelectricity sensitive element; It is sensitive to detect the infrared reflected signal; Works with Arduino sensor expansion board can make black / white light detection, obstacle detection, shredder shredded paper detection, watt hour meter pulse data sampling and other products
Specification	3-pin connector, input 5V-GND, S-pin output digital voltage signal 0~1; Working voltage: 5.0V; TCRT5000 photovoltaic conversion component, with infrared emitting and receiving LED in the component; Emitting LED working current: 10mA; Receiving LED working current: 0.1mA; Indicator light: Signal indicator (track the black line, indicator is on); PCB installation hole: 3.2mm stand copper cylinder, screw; Interface type: Analog; Pin Definition: 1-Signal, 2-VCC, 3-GND; Fast response and High sensitivity; Simple drive circuit; Stable and long life
Application	Arduino teaching, DIY project, singlechip learning and experiment
English Manual/Spec	Yes (electronic format)
Other	A product for Arduino that works with official Arduino boards.
Packing List	1 x Track sensor brick module

Add To Cart Add To Wish List

Car Infrared 4-CH Tracking / Obstacle Avoidance Sensor Module for Ardiuno - Black + Blue

SKU #: 213567, Price: US$5.00 free shipping

Brand	N/A
Model	N/A
Quantity	1
Color	Blue + black
Material	PCB
Features	Obstacle avoidance function: IR transmitting tube of each channel sensor transmit IR continuously, if transmitted IR does not reflected back or reflected strong enough, the receiving tube is still off, TTL output port is in high level, related indicating diode is off; Or TTL output port is in low level and indicating diode is lighted on; Connecting to other sensor: Impedance value of sensor will change as environment; Value become lower and lower till reach to the value that potentiometer need, TTL output is in low level and indicating diode is lighted on
Specification	Working voltage: DC 3.3~5V; Working current: higher than 1A; Working temperature: -10~50'C; Module cable connecting: DO1: Channel 1 TTL output; DO2: Channel 2; DO3: channel 3; DO4: channel 4; GND: negative port; VCC: Positive port; Size: 44 x 30 x 8.5mm
Application	Obstacle avoidance sensor; A product for Arduino that works with official Arduino boards.
English Manual/Spec	Yes (E-format)
Packing List	1 x Obstacle avoidance sensor module

Add To Cart Add To Wish List

DIY Eduino Leonardo Module - Blue + Black

SKU #: 213956, Price: US$14.60 free shipping

Brand	NO
Model	NO
Quantity	1
Color	Blue+Black
Material	PCB
Features	Independant USB-Serial transfer chip, Leonardo adopts single chip solution to realize USB communication and control; Require for Arduino IDE1.01 and above version
Specification	Controller: ATmega32u4; Working frequency:16MHz; Working voltage: 5V; Input voltage (suggested): 7~12V; Digital I/O ports: 20; PWM channel: 7; Analog input: 12; 5V D/A port max. allowable current: 40mA; 3.3V D/A port max. allowable current: 50mA; Flash Memory:32 KB (ATmega32u4) of which 4 KB used by bootloader SRAM: 2.5 KB (ATmega32u4) EEPROM: 1 KB (ATmega32u4)
Application	Arduino DIY project
English Manual/Spec	YES
Packing List	1 x Module

Add To Cart Add To Wish List

Eduino Mega ADK R3 Module - Blue + Black (Works with Official Arduino Boards)

SKU #: 213929, Price: US$50.50 free shipping

- Color: Blue + black
- Quantity: 1
- Material: PCB
- Microcontroller: ATmega2560
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits) : 6-15V
- Digital I/O Pins: 54 (of which 15 provide PWM output)
- Analog Input Pins: 16
- DC Current per I/O Pin: 40 mA
- DC Current for 3.3V Pin: 100 mA
- Flash Memory: 256 KB of which 8 KB used by bootloader
- SRAM: 8 KB
- EEPROM: 4 KB
- Clock Speed: 16 MHz
- English Manual/Spec: Yes
- Mega ADK is a controller for based on Mega ADK for Android devices, it has extremely compact size, compatible with Arduino MEGA ADK and Google ADK. The Mega ADK can make use of Google's ADK to develop, can run on the Android 2.3.4 or Android 3.1
- Can be connected to a large number of sensors and the application module, such as a Hall sensor, button module, thermistor, accelerometers, LDR, potentiometers, touch sensor, joystick sensors and MOSFET modules, etc
- Great for DIY project
- Packing list:
- 1 x Module
- 1 x USB data cable (138cm)

Add To Cart Add To Wish List

USB LV02 DC 1~5V to DC 5V Voltage Step up Boost Module - Green + Silver

SKU #: 213970, Price: US$3.60 free shipping

Brand	HYGD
Model	LV02
Quantity	1
Color	Green + silver
Material	PCB + electronic Components
Features	USB 2.0 female socket, wide usage
Specification	Input voltage: 1~5V; Output voltage: 5V; Output current: 500mA; Input 1V~5V voltage and current, stable output DC 5V voltage; 2 x AA batteries input and output 500~600mA current; 1 x AA battery can output 200mA current, can supply power for cellphone, digital camera, singlechip and other digital devices; USB 2.0 female socket, wide usage, transfer efficiency up to 96%, compact design, easy to install; With working indicator
Application	Can supply power for cellphone, digital camera, singlechip and other digital devices; USB 2.0 female socket, wide usage, transfer efficiency up to 96%, compact design, easy to install; With working indicator
English Manual/Spec	Yes
Packing List	1 x Voltage module

Add To Cart Add To Wish List

HYGD HYDZ2 DIY Remote Control Module - Blue

SKU #: 214078, Price: US$3.00 free shipping

Brand	HYGD
Model	HYDZ2
Quantity	1
Color	Blue
Material	PCB + plastic
Features	Infrared receiver
Specification	Onboard VS1838 high sensitivity infrared receiving head; Support 3~5V voltage input; Onboard RC filtering, work stable; Output matching TTL, CMOS digital signal; PCB size: 21.2 x 9.3mm
Application	Great for DIY project
English Manual/Spec	Yes
Packing List	1 x Remote control module

Add To Cart Add To Wish List

Elecfreaks Mega2560 Ramps Shield / Stepstick / SDramp DIY 3D Printer Ramps Kit - White + Red + Black

SKU #: 208622, Price: US$186.20 free shipping

Brand	Elecfreaks
Model	N/A
Quantity	1
Color	White + red + black
Material	FR4
Features	3D Printer Ramps Kit
Specification	3D Printer Ramps LUXURY Kit, Mega2560 + Ramps Shield + Stepstick + Endstop + SDramps + Smart controller MK2a
Application	Perfect for DIY 3D printer
English Manual/Spec	Yes (Send by email)
Packing List	1 x Freaduino Mega2560 (Max.support 2A) 1 x 3D printer ramps shield v1.4 5 x A4988 stepsticks 5 x Heatsink 1 x Heat sticker 2 x Heat grease 1 x Grease brush 3 x End stop 1 x Micro SD ramps 1 x 3.1" LCD smart controller board 2 x Cables (30cm) 1 x Smart adapter 1 x Characters LCD2004 1 x 4GB SanDisk SD card 1 x PCB heatbed MK2a (include 1K resistor and 2 LED) 1 x USB cable (22cm)

Add To Cart Add To Wish List

OPENJUMPER OJ-CK204 Joystick Shield V2.1 Expansion Board - Red + Black

SKU #: 207929, Price: US$7.20 free shipping

Brand	OPENJUMPER
Model	OJ-CK204
Quantity	1
Color	Red + Black
Material	PCB
Features	Joystick Shield V2.1 Expansion Board
Specification	1 rocker arm, 4 button; leas out 8~13 digit ports; A2~A5 analog input; with 7-pin wireless expansion kit, can connect to OJ Bluetooth module
Application	Arduino DIY project
English Manual/Spec	Yes
Packing List	1 x Expansion board

Add To Cart Add To Wish List

3D Ramps Printer Reprap LCD Smart Controller Kit - Green

SKU #: 207581, Price: US$45.50 free shipping

Brand	Elecfreaks
Model	Smart LCD Controller Kit
Quantity	1
Color	White
Material	FR4
Features	3D Ramps Printer Reprap LCD Smart Controller
Specification	heat bed MK2A, Laminate FR4 1.6+-0.15mm, 2 layer, Red Soldermask - both sides, White Silkscreen - both sides, Power Input: 12v or 24v, copper plated holes, resistance between 1.0-1.2 ohm
Application	3D Ramps Printer Reprap LCD Smart Controller
English Manual/Spec	Yes
Packing List	1 x LCD Smart Controller 1 x LCD2004 module 1 x Smart adapter 1 x Adapter cable (34cm)

Add To Cart Add To Wish List

High Sensitivity Alarm Vibration Sensor Module - Blue + Black

SKU #: 213596, Price: US$3.10 free shipping

Brand	NO
Model	No
Quantity	1
Color	Blue + black
Material	PCB
Features	The product when it is not shock, vibrate switch is closed on-State, output output low level, the green indicator light is on; Vibration switches disconnected moments, output output line, the Green led is not lit; The output can be directly connected to the microcontroller, by single-chip computer to detect high or low level, to detect whether there is vibration, alarm function
Specification	The use of the company's production of SW-1810P normally closed type vibration sensors; Comparator output signal clean wave well, driving ability, 15mA; Rated voltage 3V-5V ; Output: digital switching output (0 and 1); A bolt-hole for easy installation; Using wide LM393 voltage comparator
Application	For a variety of shocks triggering, theft alarm, smart car, motorcycle alarm.
English Manual/Spec	Yes (E-file Form)
Packing List	1 x Sensor module

Add To Cart Add To Wish List

Smart Car Infrared Obstacle Avoidance Sensor - Black + Blue

SKU #: 213600, Price: US$6.60 free shipping

Brand	NO
Model	No
Quantity	1
Color	Blue + black
Material	PCB
Features	This product has strong adaption to environment and light, Whenit approaches an obstacle, infrared ray will reflect to the receiving tube, being processed of comparator circuit, green indicator light is on, output is low level; You can rotate potentiometer to adjust detection range; Effective range; 2~30cm; Working voltage: 3.3V~5V; less interference, easy installatio
Specification	Use the sensor made of black and white line tracing cars need not in the white paper on the black line running, can be in cement, yellow and complex environment tour line trace. As long as the color of periphery of the black line than black slightly shallow can, eliminate the traditional move, make the environment layout more simple.
Application	This module is designed for smart car, robot and automated machine
English Manual/Spec	Yes (E-file)
Packing List	1 x Obstacle avoidance sensor

Add To Cart Add To Wish List

4 Channel Infrared Obstacle Avoidance Sensor Module for Smart Car - Blue

SKU #: 213608, Price: US$7.30 free shipping

Brand	NO
Model	No
Quantity	1
Color	Blue
Material	PCB
Features	Infrared emission phototube of each channel sensor is giving off infra-red, when infrared ray is not reflected back or intensity is not enough, the infrared receiving phototube is off, TTL output high level, diodes light is off; When objection is in the range of detection, infrared ray is reflected back or intensity is enough, TTL output is low level, diodes light is on
Specification	Working voltage: DC 3.3V~5V; Current: Above 1A; Working Temp: -10~50 centigrade; Installation hole: M3 screw; Detection range: 1mm~60cm(adjustable), the shorter the distance, the better the performance; Sensor size: 25 x 11 x 10mm; VCC,GND: corresponding power supply terminals; DO1, DO2, DO3, DO4: corresponding output terminals
Application	This module is designed for smart car, robot and automated machine; It provides a kind of multifunction infrared detective system for the auto-machine; This module adopts infrared transmitter & receiver and components as a detector.
English Manual/Spec	Yes (E-file)
Packing List	1 x Sensor module 12 x Dubond line (20cm)

Add To Cart Add To Wish List

4 Channel Infrared Tracking Sensor Module for Smart Car - Blue + Black

SKU #: 213666, Price: US$7.40 free shipping

Brand	NO
Model	No
Quantity	1
Color	Blue + black
Material	PCB
Features	Infrared emission phototube of each channel sensor is giving off infra-red, when infrared ray is not reflected back or intensity is not enough, the infrared receiving phototube is off, TTL output high level, diodes light is off; When objection is in the range of detection, infrared ray is reflected back or intensity is enough, TTL output is low level, diodes light is on
Specification	Working voltage: DC 3.3V~5V; Current: Above 1A; Working Temp: -10~50 centigrade; Installation hole: M3 screw; Detection range: 1mm~60cm(adjustable), the shorter the distance, the better the performance; Sensor size: 20 x 11 x 15mm; VCC,GND: corresponding power supply terminals; DO1, DO2, DO3, DO4: corresponding output terminals
Application	This module is designed for smart car, robot and automated machine; It provides a kind of multifunction infrared detective system for the auto-machine; This module adopts infrared transmitter & receiver and components as a detector.
English Manual/Spec	Yes (E-file)
Packing List	1 x Tracking sensor module 12 x Dubond line (20cm)

Add To Cart Add To Wish List

AT24C256 I2C EEPROM Storage Module for Intelligent Car - Red + Black

SKU #: 213399, Price: US$2.50 free shipping

Brand	N/A
Model	AT24C256
Quantity	1
Color	Red + black
Material	PCB + plastic + iron
Features	Storage module
Specification	Imported chipset which marked 2ECL code; Capacity is 265KB; On-board AT24C256 chip; On-board I2C communication required pull-up resistor; All pins are leads and marked
Application	Great for DIY projects
English Manual/Spec	Yes
Other	Data download website: http://www.kuaipan.cn/file/id_10606769630516673.htm
Packing List	1 x Storage module 4 x DuPont lines (20cm)

Add To Cart Add To Wish List

Touch Sensor Switch Module - Black

SKU #: 213316, Price: US$4.00 free shipping

Brand	NO
Model	NA
Quantity	1
Color	Black
Material	The PCB + plastic + iron
Features	Touch sensor
Specification	3~5V
Application	All kinds of electronic products or DIY love No.
English Manual/Spec	Have
Other	Size: 45 x 18 x 5mm; Working voltage: DC 3~5V; With output TTL level signal indication; Can be connected directly to the microcontroller output IO port; Anti-interference ability; Connect the microcontroller to achieve the touch switch function; The standard 2.54mm pin to do input and output connections; Surrounded by a fixed mounting holes
Packing List	1 x Touch sensor switch module

Add To Cart Add To Wish List

ULN2003 5-Line 4-Phase Stepper Motor Driver Module - Blue

SKU #: 213087, Price: US$2.90 free shipping

Brand	NO
Model	ULN2003
Quantity	1
Color	Blue
Material	The PCB + plastic + iron
Features	Can be direcctly connected to 28BYJ-48 stepper motor
Specification	5-12V
Application	All kinds of electronic products or DIY lover
English Manual/Spec	Have
Other	On-board ULN2003A chipset; 5-12V power supply; On-board 4-way indicator light; On-board XH-5P socket; Compatible with Arduino
Packing List	1 x ULN2003 5-line four-phase stepper motor driver module

Add To Cart Add To Wish List

RFC-1100C Wireless RF Transceiver Module w/ Pin Header / Antenna - Blue

SKU #: 208524, Price: US$11.90 free shipping

Model	RFC-1100C
Quantity	1
Color	Blue
Material	PCB
Features	Use CC110L wireless RF chip, fully compatible with CC1100/CC1101, more simple and stable; Programmable data speed: 0.6~600kbps (recommend range: 2.4kbps~500kbps); Working frequency range: 387~464MHz free ISM frequency band (recommend range: 430~436MHz); Modulation mode: 2-FSK, 4-FSK, GFSK and OOK; 64 bit receive and transmit; Can set address by software, output data when receive the module's address; Can directly connects kinds of SCM for use; Convenient software programming; Low power consumption performance, current consumption about 20uA when on sleep mode; Max transmit power: +20dBm; Quick start: 240uS; Fast switch.
Specification	Working temperature: 4.5~5.5V, Max. transmitted power: +20dBm, Max. data transmission: 500kbps, output power: +20dBm, working temperature: -40'C~85'C, classical sensitivity / highest sensitivity: -110/-116dBm, power down mode working current: 20uA: 65mA, receive mode working current: 12.5mA.
Application	Great for DIY projects.
English Manual/Spec	Yes
Packing List	1 x Wireless RF transceiver module
	1 x High gain antenna

Add To Cart Add To Wish List

Elecfreaks 3D Printer Ramps Reprap Expandable Kit

SKU #: 207821, Price: US$100.50 free shipping

Brand	Elecfreaks
Model	N/A
Quantity	1
Color	White + black
Material	FR4
Features	This Ramps EXPANDABLE kit, base on Ramps Shield v1.4 and Freaduino Mega2560(Max support 2A current) and 5pcs Stepstick A4988; You can use it quickly build own 3D printer.
Specification	NOTE: The mega2560 board is not flashed with any firmware since i don't know which firmware you like to use with it.
Application	Great for DIY project
English Manual/Spec	Yes (send by e-mail)
Packing List	1 x Freaduino mega2560 (Max. support 2A)
	1 x 3D Printer ramps shield v1.4
	5 x A4988 Stepstick
	5 x Heatsink
	1 x Heat sticker
	2 x Heat grease
	1 x Grease brush
	1 x Plastic box
	1 x USB cable (22cm)

Add To Cart Add To Wish List

Elecfreaks PCB Heated MK2A Heat Bed Hot Plate for RepRap 3D Printer - Red + White

SKU #: 207342, Price: US$24.90 free shipping

Brand	Elecfreaks
Model	PCB Heated Bed MK2a
Quantity	1
Color	Red + white
Material	FR4
Features	Important part for assembling printer
Specification	Size: 214 x 214mm; FR4: 1.6+/-0.15mm; 2-layer, 35m copper; Red soldermask: both sides; White silkscreen: both sides; Power input: 12V / 24V; Resistance: 1.0~1.2ohm
Application	Used to assemble 3D printer
Other	A central mounting hole on the front side allows three point mounting; Much easier for bed leveling in comparison to 4 point mounting; Installation: First level the side with two holes and fix in place, then level the side with one hole; A glass plate is highly recommended to provide a truly flat surface and rigidity. Copper plated holes as shown in reprap wiki: reprap.org/wiki/PCB_Heatbed
English Manual/Spec	Yes (E-format)
Packing List	1 x Heat bed board
	1 x Resistor
	2 x LED

Add To Cart Add To Wish List

32-CH Servo Motor Control Driver Board for Arduino (Works w/ Official Arduino Board) - Blue + Black

SKU #: 206987, Price: US$35.90 free shipping

Model	No
Quantity	1
Color	Blue + black
Material	PCB
Features	With Andriod cellphone control software
Specification	Onboard 512K ROM (If every command is used to control the 32 motors at the same time, more than 500 commands can be saved); Supports PS2 controller; Supports Window 8, 64bit system, Linux system, Windows XP / Vista / 7; Users can update firmware online; Control channels: 32(can be controlled at the same time and the accuracy can be adjusted); USB or UART communication port; Can control 32 servo motor sync; Built-in three languages: Simplified Chinese, Traditional Chinese, English
Application	A product for Arduino that works with Official Arduino board
English Manual/Spec	Yes
Packing List	1 x Control board
	1 x English user manual
	1 x USB cable (140cm)

Add To Cart Add To Wish List

1501MG Metal Gear 17KG Torque Analog Servo for R/C Cars / Truck / Robot Arm / Robot - Black

SKU #: 208234, Price: US$18.00 free shipping

Model	1501MG
Quantity	1
Color	Black
Material	Components + aluminum alloy
Features	Large torque, 180 degree rotary
Specification	Suitable for 1:10, 1:8 Sports car, off-road vehicles, truck, monster truck, climbing car and robot; Power: 4.5~6V; Operating speed: 0.14s/60' (no load running); Storage temperature: -20~55'C; Dead band width: <=4us
Application	1:10, 1:8 Sports car, off-road vehicles, truck, monster truck,
English Manual/Spec	Yes
Packing List	1 x Analog servo

Add To Cart Add To Wish List

GY-29 ADXL345 Three-axis Digital Tilt Gravity Angle Sensor Module - Green

SKU #: 208214, Price: US$8.20 free shipping

Model	GY-29
Quantity	1
Color	Green
Material	Copper-clad plate (CCL)
Features	ADXL345 module
Specification	Three-axis, +/-2g, +/-4g, +/-4g, +/-16g; Digital acceleration module; Provides checking code for tilt angle of SCM; Direct output 0~360 degree; Acceleration module information download address: KuaiPan: http://www.kuaipan.cn/file/id_121557448606613521.htm; 115: http://115.com/file/an8l3g73#GY-29-ADXL345
Application	Gravity angle sensor module
English Manual/Spec	Yes
Packing List	1 x Module

Add To Cart Add To Wish List

RF1100M Wireless Transceiver Module - Blue + Golden

SKU #: 207253, Price: US$5.90 free shipping

Model	RF1100M
Quantity	1
Color	Blue + golden
Material	PCB
Features	Adopts newest CC110L wireless RF chip, compatible w/ CC1100, CC1101; Receiving sensitivity: -116dBm; Programmable data rate: 0.6~600kbps (suggest 2.4~500kbps); Free ISM frequency: 387~464MHz, suggest 430~436MHz; Modulation system: Supports 2-FSK, 4-FSK, GFSK and OOK
Specification	Transmitting power: -30~10dBm; Operating distance: >0.5m; Transmitting rate: 1.2~500Kbps; Transmitting current: <30mA; Receiving current: 12.5mA; Standby current: 2.5uA; Data port: SPI; Communication distance: 200m; Antenna impedance: 50ohm; Working temperature: -40~85'C, suggest higher than -20'C
Application	SMD soldering port, pin space is 1.27mm, ultra-thin, suitable for small space; Can match w/ CC1100 micro power module, USB port / serial module, RFC-1100H large power module; Outdoor visible communication distance can be 200m w/ spring antenna
English Manual/Spec	Yes
Packing List	1 x Wireless transceiver module (15mm spring antenna)

Add To Cart Add To Wish List

201 USB 2.0 Wireless Wi-Fi Module - Green + Silver

SKU #: 205825, Price: US$20.40 free shipping

Model	201
Quantity	1
Color	Green + silver
Material	Alloy
Features	This is a low-cost wireless LAN module is compact in the product design and embedded systems wireless connection
Specification	Wi-Fi PCDUINO is a wireless LAN module supports IEEE 802.11 b/g/n standard and PH value; Connector supports USB 2.0; Wi-Fi PCDUINO support RT5370
Application	Used for IEEE 802.11 b/g/n; Great for DIY project
Other	iT1R mode with 150Mbps with PHY rates for both transmit and receiving; Dynamic data rate: Maximum data rate up to 150Mbps (11n: Legacy, mixed and green field); Modes: 11g 54/48/36/24/12/9/6 Mbps (Auto Sensing), 11b:11/5.5/2/1 Mbps (Auto sensing); Supports 20MHz/40MHz Bandwidth; Security supports for 64/128 bit WEP, WPA/WPA2, WPA-PSK/WPA2-PSK (TKIP / AES); Reverse Direction Grant Data Flow and Frame Aggregation; Cisco CCX Support; USB2.0 standard; Operating Frequency 2.412GHz~2.484GHz; Transmit Output Power: 802.11g 15+/-1dBm; Receive Sensitivity 11b: -78dBm at 11Mbps (Typical) / 11g: -68dBm at 54Mbps (Typical); Operating voltage: 3.3V; Antenna port impedance: 50ohm
English Manual/Spec	Yes
Packing List	1 x Module

Add To Cart Add To Wish List

XH-W1301 3-Digit Red LED Digital Smart Thermostat Intelligent Temperature Controller - Green

SKU #: 207079, Price: US$8.80 free shipping

- Model: XH-W1301
- Color: Green
- Material: PCB
- Temperature control range: -50~110'C
- Resolution: 0.1'C @-9.9~99.9'C, 1'C @ other temperature
- Temperature measurement accuracy: 0.1'C
- Control accuracy: 0.1'C
- Hysteresis accuracy: 0.1'C
- Refresh rate: 0.5s
- Input power: DC / AC 12V
- Measurement input: NTC (10K 0.5%); waterproof sensor
- Output: 1-CH relay output, capacity = 10A
- Working temperature: -10~60'C; Humidity 20%~85%
- Size: 78 x 51mm (M3 mounting hole, 75mm opposite angle)
- Power consumption: Static current: < = 35mA; Pick up current < = 65mA
- Built-in ARM chipset
- Auto power off memory function
- Button buzzer (can be turn off)
- High temperature buzzer alarm (0~110'C settable)

Add To Cart Add To Wish List

MANOLINS TCS3200D Color Recognition Sensor Detector Board RGB Module for Arduino

SKU #: 206261, Price: US$9.00 free shipping

- Brand: MANOLINS
- Model: TCS3200D
- Quantity: 1
- Color: Blue + black
- Material: PCB
- The color sensor module base on TCS3200 which is a programmable color light-to-frequency converter, it could filter RGB data from source light and convert it to a square wave (50% duty cycle) with frequency directly proportional to light intensity (irradiance); The full-scale output frequency can be scaled by one of three preset values via two control input pins (SO, S1 selectable options 2%, 20%, 100% frequency), and pin S2, S3 control the filter of RGB; Digital input and digital output allow interface to a microcontroller or other logic circuitry directly; Output enable (OE) places the output in the high-impedance state for multiple-unit sharing of a microcontroller input line; At last, user can calculate the color of the light by RGB values
- High-resolution conversion of light intensity to frequency
- Programmable color and full-scale output frequency
- Communicates directly with a microcontroller
- Working voltage: 2.7V~5.5V
- Working current: 1.4mA
- Output frequency: 10KHz~12KHz
- Duty cycle: 50%
- Detection state: Static detecting
- The best detection distance: 10mm
- Working temperature: -40'C~85'C
- Programmable color light-to-frequency converter, suitable for colorimeter measurement range; Such as color printing, medical diagnosis, computer color monitor calibration and the process control and color match of the paint, textile, cosmetic and printing material
- A product for Arduino that works with official Arduino boards.
- Packing List:
- 1 x RGB module

Add To Cart Add To Wish List

DAGU VA2 Aluminum Alloy Robot Arm Clamp w/ Two Metal Gear Motors for Arduino - Silver White + Black

SKU #: 206374, Price: US$52.10 free shipping

- Brand: DAGU
- Model: VA2
- Quantity: 1
- Color: Silver white + black
- Material: Aluminum alloy + Plastic + metal
- Features: Long arm and the wide flare angle, 2.5mm thickness aluminum alloy + 2 high quality motor, strong power, low noise, fine workmanship, stable performance
- Specification:
- Arm length: 23cm
- Aluminum alloy thickness: 2.5mm
- Claw largest angle: 55mm
- With two metal gear motor: S05NF STD servo and S06NF STD servo
- S05NF STD servo:
- Rate: 0.2 sec / 60 degree
- Output torque: 3.2kg / cm
- Rated voltage: 4.8~6V;
- S06NF STD servo:
- Rated: 0.22sec / 60 degree
- Output torque: 13kg / cm (maximum up to 15kg)
- Rated voltage: 4.8~6V
- Application: Great for DIY project
- A product for Arduino that works with official Arduino boards.
- Packing List:
- 1 x Arm
- 1 x Hex wrench
- 4 x Screws

Add To Cart Add To Wish List

SZF301 Mini Air Pump Motor - White + Silver + Black (1.25V~6V)

SKU #: 206278, Price: US$3.20 free shipping

Add To Cart Add To Wish List

MG995 Aluminum Alloy Robot Gripper w/ 2-Servo for Arduino - (Works with official Arduino Boards)

SKU #: 206534, Price: US$39.20 free shipping

Model	MG995
Quantity	1
Color	Black
Material	Electronic components + aluminum alloy
Features	This robot gripper is the latest generation of two steering gear holder; Supports single clamping and clamping + wrist rotation; For the convenience of description, hereinafter referred as the gripper
Specification	The gripper comprehensive a similar gripper advantages and improvement of the creative; More rigid, parallel clamping easy to locate the object to be held to support a variety of standard size servos (suitable for Fraser MG995, MG996, SG5010 servo, Hitec, Parallel, Futaba, Fraser brand size of 40 x 20 x 36mm standard steering gear), The greater open distance, the breadth of clamping shape of the object (square, cylindrical, sphere, cone, etc.); Expandability (the claws with four installation holes, can be installed thin-film pressure sensor or flexible cushion) and other notable features; The widest of the claw is 5.5cm
Application	The gripper comprehensive a similar gripper advantages and improvement of the creative; More rigid, parallel clamping easy to locate the object to be held to support a variety of standard size servos
English Manual/Spec	Yes
Packing List	1 x Robot gripper

Add To Cart Add To Wish List

RF1100S 433MHz Wireless Transceiver Module w/ Spring Antenna - Green + Silver (1.8V~3.6V)

SKU #: 206482, Price: US$6.50 free shipping

- Model: RF1100S
- Quantity: 1
- Color: Green + silver
- Material: PCB
- Adopts the latest CC110L wireless radio frequency chip, compatible with CC1100, CC1101,
- 433MHz wireless transceiver, working via 433MHz free ISM frequency band (387~464MHz, recommend 430~436MHz)
- Supports 2-FSK, 4-FSK, GFSK and OOK modulation system (do not support MSK)
- Programmable data rate: 0.6~600Kbps (recommend 2.4Kbps~500Kbps)
- Lower voltage 1.8~3.6V power supply, recommend 3.3V
- Sleep current: <2.5uA
- Maximum transmitting power: +10dBm; Maximum transmitting current: <30mA; Receiving current: 12.5mA
- Quick start time: 240uS (from sleep mode to receiving mode (RX) or transmitting mode (TX))
- Quick switch: <1ms (between receiving mode (RX) and transmitting mode (TX))
- The module supports setting site, it outputs data as receiving the setting site; Supports connecting singlechip to use, convenient for software programming
- SPI interface
- High-accuracy crystal and wire winding coil, external shielding cover, steady-state, strong anti-interference
- Single pin header, the space between the pins is 2mm
- With silver plating spring antenna, outdoor straight line communication distance up to 200 meters
- Packing List:
- 1 x RF 1100S wireless transceiver module

Add To Cart Add To Wish List

Double-Side SOP28 / SOP16 / SSOP28 to DIP28 / DIP16 Adapter / Breakout Board for Arduino - (3 PCS)

SKU #: 206473, Price: US$5.20 free shipping

Model	N/A
Quantity	3
Color	Black + golden
Material	Glass fiber FR4
Features	Gold-plated double-side FR-4 PCB, unique design compatible with more IC
Specification	Gold-plated double-side FR-4 PCB, unique design compatible with more IC; One side is SOP28 / SOP16 to DIP28 / DIP16, the other side is SSOP28 to DIP28
Application	Great for Arduino DIY project
Other	Surface Finishing: HASL; A product for Arduino that works with official Arduino boards.
English Manual/Spec	Yes
Packing List	3 x Adapter boards

Add To Cart Add To Wish List

SZF303 Small Water Pump Motor Water / Oxygen Pipe / Tube - Transparent (100cm)

SKU #: 206265, Price: US$1.90 free shipping

Model	SZF303
Quantity	1
Color	Transparent
Material	Plastic housing
Features	Use for small fish tank oxygen supply; DIY project
Specification	Inner diameter: 0.2cm; Thickness: 0.4cm; Length: 100cm
Application	Small water pump pipe / tube
English Manual/Spec	No
Packing List	1 x Water pipe

Add To Cart Add To Wish List

ACS712 20A Current Sensor Module - Blue

SKU #: 206999, Price: US$4.90 free shipping

- Color: Blue
- Material: PCB + metal
- ACS712ELC-20A sensor chipset
- Powered by 5V power supply
- On-board power indicator
- Measures -20~+20A current, corresponding simulation output 100mV/A
- Output voltage is VCC/2 when on current was measured
- ACS712 is based on the principle of Hall detection, please avoid the magnetic field affect when using it
- Datasheet: http://m2.img.dxcdn.com/CDDriver/sku.206997.rar

Add To Cart Add To Wish List