1.5" LCD Digital Infrared Thermometer - Yellow + Black

Pros: Thermometer is real working. Accuracy tested at ~ 550C for thermocouple muffle furnace. And At 0C -for melting ice. The result on the photo. The accuracy is good. At 900 ° C did not check - very hot. Rugged body. This is the cheapest thermometer in the shop with Measurement range from -50 to +900 C.

Cons: poor carton, small instruction

Other: Very good Infrared Thermometer. Low price

Pros: Tested on a muffle furnace. It perfectly shows the temperature, I heat the oven to 800 C and above. Easy to use, quick to deal with him. Included also sent a new battery, which was very pleased. Both the thermometer small, handy. Pleased with the purchase and price.

Cons: I have not noticed yet.

Other: Good working thermometer for little money. And the range of temperatures is great - you can use in the laboratory.

Pros: * It measures a very wide range of temperature. * It is cheap, but the materials are durable and good looking. * Very easy to use and understand, even without instructions.

Cons: * The laser does not indicate the point you are measuring. You are measuring below the laser indication, and this mislead sometimes.

Other: I have different modes and settings, you need time to use this device on all capacity, but does what should do very well, measure temperature of objects and living.

Pros: it is a very good infrared thermomter that Measurement range is -50+900C.I personally test it on a light orange hated iron.

Cons: i dont have negative opinion for the thermometer,but it would be nice if there was a cover or a box for safe-keeping

Other: all in all the the product is very good and helpful for every ingineer.The price is really low compared with the prices in Bulgaria.In bulgaria the price is double expensive.Sorry for the bad english :)

Pros: Good quality and aesthetics. Very easy to use and a very broad temperature range. Also good ratio of spot size vs. measuring distance (1:12)

Cons: Upon first usage all measured temperatures were about 10 degrees too low. Cleaned the lense with compressed air to no avail. However, after plugging out and in the 9V battery again, it now works flawlessly. The laser seems to aim a little above the actual measuring point

Other: Considering the price this is a very complete infared meter for a wide range of use