18.5mm Textured Aluminum Reflector

Pros: - All aluminum construction is rugged and enhances heat sinking - High luster surface finish - Effective texture for beam smoothing

- Generously sized pinholes for installation and removal

- Fits MTE 1xAA light (sku 6162)

- Precise machine work and beautiful finish for less than two and a half bucks! What a bargain.

Cons: - No relief for emitter leads on underside

- Threads aren't bad, but could be smoother

Other: This nicely finished solid aluminum reflector addresses the one noteworthy misgiving I had about the MTE Rebel 1xAA light-- the smooth plastic reflector with its swirly beam and iffy heat evacuation. The transplant was not a simple drop in, but it wasn't a troublesome ordeal either.

Pros: Its built extremely good, it is made of of solid aluminum which helps to enhance heat-sinking. The coating on it is very good, it is a medium orange peel and very shiny. Also the hole where the led goes is the perfect size for cree's, and because of that it has no donut hole in the beam(ie, no black spot in the middle of the throw).

Cons: So far i haven't found any con.

Well maybe theres one, i should of ordered this sooner :D.

Other: If you want a super cheap reflector that works amazingly well go with this, you wont be disappointed.

Pros: Made of solid aluminium.
Well made.
Good quality.
Holes on underside for screwing in/out.

Cons: None of my torches could utilise the threads, the threads either stopped a centimetre or two short or were incompatible.
The reflective surface is just a coating, I tried to get some heavy fingerprints off with a DX microfibre cloth after grinding off the threads. They didn't seem to come off, and the bumps of the orange-peel surface revealed a coppery colour underneath. So it has to be treated like the surface of a CD or DVD.

Other: Good value reflector.

Pros: I first ordered this by acident,and it turned out to be a blessing. with a little fileing it will fit the mini nag flashlight with 2 14500 lithium batteries and a streamlight TL-3 bulb you have a light that will amaze your friends for a mini mag

Cons: Non that I know of

Other: Bottom line for the cost of the flashlight ,reflector and batteries you can not go wrong,it turned out to be an accident when I was playing around with it ,then i noticed it will fit the mini mag with a little work. all my plastic reflectors melted to the bulb. I am ordering 3 more . if you own a mini mag you should try this reflector,with 2 lithium 14500 and a TL-3 bulb you will not be disappointed.

Pros: Worked like a charm! It fit perfectly into the project I had in mind for it. I used it with sku.03475 and sku.10084 for some very nice results running off of two AA batteries. Pretty awesome, actually.

Cons: A bit pricy for a small piece of aluminum. The flashlight I installed this into cost 1/3 the price of just this reflector alone.

Other: You'll need a small emitter for this small reflector. I recommend sku.03475. Easily supercharge a cheap dollar store flashlight with one of these! Nice work DX.

Pros: I used this reflector for a headlamp (pictured above) that I was putting together. At the time I had'nt though of using this and then remembered I purchased this reflector by accident. I removed the crappy 1.5mm leds and installed this one. It fit perfectly and works great. I use it almost everyday.

Cons: None that I could think of

Other: Reflector positions a perfect (slightly diffused) solid white spot for up close encounters.