20mW Aggressivity Green Laser Rifle Scope with Gun Mount (1*CR123A)

Pros: - Solid physical build quality, feels and looks good. - Good mount for Picatinny, RIS, or Weaver-style rails. - Includes (ususally, see below) several mounting optins and all the tools and parts you'll need to set it up. - The box is nicely laid out, and holds the laser securely while looking nice, except for the label, see below. - Very bright, if you get a good one, see 'Cons' and 'Other Thoughts', below. - Nice adjustment screw arrangement for zeroing the laser to the impact point of the bullet, seems to hold zero quite well, but more testing is needed.

Cons: - The laser has "laser scope" imprinted on the box. It is NOT any type of scope, but is in fact a laser SIGHT. This should be obvious to anyone who needs this item, but some people will be confused, especially if you are buying them to resell locally. - The body of the laser is imprinted with "Armed Forces". This is unnecessary and detracts from the apparant quality of the item. It would look much better with nothing printed on the housing. - The internal quality control is spotty. I've ordered several of these lasers for friends. Some have worked fine, others have issues with dimming after a few seconds of continuous use. - The last one I ordered was missing the 'twist-on' tail cap, only including the pressure pad switch.

Other: A great laser at a great price, provided you get a good one, which appears to be hit or miss. WARNING: DX is not supporting these lasers, buy at your own risk.

Pros: This laser is very bright, is is very easy to set-up until zeroing target. Very accurate, and the laser comes with many tools and mounts. great.

Cons: The laser came not-working. Like one other Mystery laser I ordered. You just have to check the switch and the tube for none court-circuiting. After twenty minutes, the laser is finally working.

Other: Buy it if you can accept that maybe you can fix the issues that you would encounter, and if you want a nice built-in laser.

Pros: seems good so far, i've only had it for less than an hour but already mounted it on my russian sks rifle. so far seems good, the adjusting screws were fine and the pressure pad works well.

Cons: not a con, but havent shotten with it yet so not sure how it will respong to recoiland whether it'll hold true after being adjusted correctly

Other: its most likely worth buying for real guns, but again havent shotten it yet

Pros: I could not get it adjusted in since the adjustments seem not to work very well. Only way to resolve the problem was to loosen the mounting screw so as I could turn the laser counter clockwise as far as it could go and then I got the laser right where the front sight is pointing. Thankfully the adjustments worked to move the laser to the proper position once I did this and now I'm really happy with it.

Cons: Mine did not have the little allen wrench to mount but luckily I had the right size in one of the sets I have. Mounted the laser on my rifle and proceded to try to adjust because it was far to the left but when I moved the adjusted counterclockwise it seemed to not do anything but make it off worse. So I moved the adjustment the other way and seemed to get it a little closer but still was not inside my sights ring and not near my front sight. I realized I should try loosening the mount screw and twisting the scope all the way around the other direction as far as it would go and low and behold I got the beam right on the front sight that way. I've seen videos of where others have had this problem with these and I'd imagine this will correct it for anyone. I was thinking I might have to send it back at first but really didn't want to so I figured out a simple fix even though your adjustment caps might not be in the position you want them not a big deal to me and looks nice on my rifle.

Other: Before I figured out a solution to the adjustments I would have said no go but once I got it sighted in where my front sights are pointing by turning the laser in it's mount I highly recommend it. I wish it had the allen wrench like advertised but I already had one after going through my tools so no big deal. I've not fired the rifle yet with the laser but I expect it will be fine.

Pros: Good definition. Focused, accurante and strong green dot. Very easy to reset the setpoint. Looks good and the material of construction seems tobe good and resistant.

Cons: Nothing yet, but we have to see how it deals with the continuous utilization.

Other: For a bb riffle of a friend. As somebody tells before, theres no need of anithing printed on the housing but that does not detract the quality of the laser that since to be a great deal attending to the price.

Pros: -extremely bright and easy to use

Cons: i was eager to use this on my ruger .22 however after a few weeks the pressure pad stop working and i had to switch to the solid end. however even if i tighten it all the way so the laser is "on" and a single shot it proceeds to turn off.

Other: maybe it varies between each one but mine was great..... until i tried to shoot with it mounted

Pros: I just received this laser in the mail. It was packaged well and when opened there was no damage. I plan on mounting it on one of my rifles in the near future. I like the fact that you can adjust the elevation and windage with the buttons on the top and side. I have had a different laser where you had to take the front end off and do your adjustments and that laser cost me over $100 dollars. I would recommend this laser in a heart beat.

Cons: I found no cons with this laser

Other: Bottom line is if you want a great laser that is built well buy this one from Deal Extreme.