302 Two-Component Acrylate Adhesive (5-Minute A+B Glue)

Pros: I like adhesives. Gluing makes a better join than mechanical fasteners. Epoxy is a favourite. This would be a good alternative to the 5 minute epoxy for moderate strength joins.

Cons: None except some might not like the uncured smell.

Other: A good price Worth a try to see how many substances will bond with it.

Pros: Works Fine! I'm using it for my hobby, model airplanes. But it is handy to have! Glues almost everything!

Cons: Real epoxy smell.. But it isn't disturbing for me!
Small, just 2 times 10 grams.
(10 grams of harder and 10 grams of hars (
Resin?)

Other: ships in a week! And works great! Good pakaging! Cheap. What do you want more?

Pros: This forms a good, strong bond to almost anything. Set up time is fast, around 5 minutes, with full strength at 24 hours. The nozzles are quite fine so it's easy to squeeze out just a small drop when you only need a little bit. It's cheap, too.

Cons: It's VERY smelly. Be sure to use it in a well ventilated area. The cured color is a purplish milky-white, not water clear. This may be a drawback for those situations where a clear adhesive is needed. The max temperature is 100C, so don't use it where heat is an issue.

Other: This is a good adhesive to have in your arsenal.

Pros: Good acrylic-based adhesive glue that sets up in about 5 minutes (once the two chemicals are mixed together). Full set time for me was around 24-48 hours. Especially good for binding plastics. The spreader/mixer stick it comes with is very useful and can be reused.

Cons: The glue does smell quite a bit so make sure to have some ventilation going during use.

Other: Well priced, quality glue which bond with most common materials.

Pros: -> The glue is very cheap and compared to more expensive ones, its weaker, but still very strong
-> Good price, may be because of the lack of care with the environment or the use of forbidden substances, but the glue is very good.

Cons: -> It smell horrible, you better use it in a well ventilated area, I don't think that's good for health.
-> Could be stronger, I found it weak, expected more.

Other: Good glue, worth the money. for something serious you better use some loctite, araldite or some expensive glue of your choice.
There's a nasa spaceship picture at the back of the card, but i don't think any one would put this on such an expensive think... more likely to use on a coke/mentos rocket.

Pros: Great acrylic glue.
Good strength.
Easy to use.

Cons: Has a very prominent smell of solvents.
Hardens VERY fast, half of the glue hardened on the mixing stick, the other half was going hard within a minute or two. I mixed up about half a CC.

Other: Really cheap glue that works fairly well, but hardens too fast.

Pros: works well
separate tubes are much better that the attached tubes (loc-tite epoxy style), the attached tubes never work evenly and tend to bind up
useful to have around
certainly strong enough for general repairs and hobby work

Cons: as others have mentioned, the glue smells, a lot - use in a well ventilated area

Other: Epoxy is quite useful to have around and this is a very good price. The 2-tube format is nice as long as you don't lose one of the tubes. This is good quality for the price and is certainly worthwhile.

Pros: Excellent product where the fine nozzles allow for using just the tiny amount you need..
I don't bother with five minute epoxy anymore, I much prefer this stuff.
Sets solid in about five minutes so you can even hold bits together for that long and not bother with clamps.

Cons: None at all.

Other: I recommend this glue for attaching many of the best buys in DX LED lamps. It is a better solution than double sided adhesive tape.

Pros: Excellent product where the fine nozzles allow for using just the tiny amount you need.. I don't bother with five minute epoxy anymore, I much prefer this stuff. Sets solid in about five minutes so you can even hold bits together for that long and not bother with clamps.

Cons: as others have mentioned, the glue smells, a lot - use in a well ventilated area

Other: Good glue, worth the money. for something serious you better use some loctite, araldite or some expensive glue of your choice. There's a nasa spaceship picture at the back of the card, but i don't think any one would put this on such an expensive think... more likely to use on a coke/mentos rocket.

Pros: Great glue, works really well, only does its job
otima cola, faz seu trabalho perfeitamente.

Cons: smells a lot, use outdoors
tem um cheiro muito forte, use em areas abertas

Other: its perfect for all uses. works well from -60c to 100c in degrees. well if you need buy it
otima para qualquer tipo de uso. funciona de menos 60 graus celcius ate 100 graus celcius.