4.0mm Gold Plated Banana/Bullet Connectors with Heat Shrink Tubing (20-Pair)

Pros: Price! Almost the same connectors sells here in Europe hobby shops for nearly 1 euro per pair, and you don't get heat shrink tubing.
Contact resistance is only 0.3 mOhm, comparable with other brand name connectors.
Easy to plug and unplug.

Cons: Spring could be a little bit stronger.

Other: I use it for my electric R/C airplanes, to connect larger brushless motors and electronic speed controlers (ESC), and they can withstand 80 A current without problen. These connectors are ideal for high current aplication , or when low contact resistance is needed.

Pros: These are a great deal, I used them for connecting a LiPo to an ESC and they work perfectly. Much easier to solder than some 2mm ones I was using previously. The included heat-shrink is useful and fits great.

Cons: Not much that I can think of. They are quite stiff so don't pull them apart from the wires you have connected them to. As long as you have soldered them well there should be no problems.

Other: After using them these would be my first choice when I need to change the connections on ESC's or LiPo's. A great deal!

Pros: Great item, exactly what you'd expect, good quality bullet connectors for use on (relatively) high current uses, best used with 12ga wire, but would probably work alright with different sized wires too.

Cons: None that i can think of, the only thing is i wish they made the heat shrink an optional upgrade as i need different colours anyways, so i have purchase more heat shrink.

Other: Great item at a great price, if you need the, buy em.

Pros: Price! Almost the same connectors sells here in Europe hobby shops for nearly 1 euro per pair, and you don't get heat shrink tubing.
Contact resistance is only 0.3 mOhm, comparable with other brand name connectors.
Easy to plug and unplug.

Cons: Spring could be a little bit stronger.

Other: I use it for my electric R/C airplanes, to connect larger brushless motors and electronic speed controlers (ESC), and they can withstand 80 A current without problen. These connectors are ideal for high current aplication , or when low contact resistance is needed.

Pros: Price is the biggest advantage of this deal. For $11 I received 20 pairs, for same price I can buy not more than 8 pairs here in Czech Republic. I can't say how log they can last but they feel very solid - exactly like those I can buy here locally.

Cons: Difference is in length of the female part, DX version is a bit shorter than European one. DX version has also little less gold look.
I received only 39 pieces of heat shrink tubing, but that is no real cons - I'm planning to use red tubing on positive wires anyway.

Other: Very good deal. I'm really satisfied with them!

Pros: - Easy to mount - Fits normal banana plug speaker terminals - Sucks the solder really well, and fastens the cable fast and easy I use 6mm2 speaker cable in these without any problem at all!

Cons: - They are small, so using a big solder iron can be a bit hard. If you fasten the blug while soldering this process will go much smoother.

Other: For easyer connections these plugs are a must. I use them for seaker wire without any trouble at all. These plugs are good for any relatively low currence connections.

Pros: Very easy to solder, using 12 AWG wire. Comes with shrink tubes for both ends, so I could cut some down to use in other parts of my project. Connects tightly and the shrink tube fits snugly around 12 AWG wire...

Cons: ...but any smaller wires will require either extra padding, smaller diameter shrink tube, or perhaps get the 2 mm bananas SKU: 14996.

Other: I recommend for both the price and the quality.

Pros: Great quality. Easy soldering. Runs a lot of current without heat. Not too tight or too loose.

Cons: No cons at all. Really great quality connectors. A bit expensive may be.

Other: Great value, buy it if you need banana connectors for your RC. Also are great for DIY projects.