40 * 3.5mm Gold Plated Banana Connectors for R/C Model Batteries (20*Male + 20*Female)

Pros: Excellent build quality at an incredible price! Some hobby shops charge up to ten times as much. Male and female connectors hold very well together.

Cons: None whatsoever. None whatsoever. None whatsoever. I guess they could come with heat shrink but I am only saying this to get the 1000 words for the review.

Other: Perfect for up to 50 amps above that I would go for the next size up.

Pros: - Very good connectors. Ideal for high current applications, such as power supplys, accu connectors and so on. - Very easy to solder - No flux or something like that needed - Very cheap for this quality ans quantity

Cons: - No negative comments!

Other: I use these connectors to connect three 12V Pb accus in a solar power supply. I've 25Ah and around 300A peak currents. These connectors have an low resistance due to the gilding and a large contact surface. The connecters female connecter fits very good to the male one.

Pros: The connectors very good of quality.
They are very good of high power rating!
The male and female connectors fits good! that's very important for high power using!
I am using them for almost connection that needs good connection!

Cons: NoneNoneNoneNoneNoneNoneNone
NoneNoneNoneNoneNoneNoneNone
NoneNoneNoneNoneNoneNoneNone
NoneNoneNoneNoneNoneNoneNone
NoneNoneNoneNoneNoneNoneNone
NoneNoneNoneNoneNoneNoneNone

Other: Just buy them they are very good for the prices! None of the webshops can't beat this!
So you wouldn't be dissapointed!

Pros: Just received the Gold Plated Banana Connectors for R/C Model Batteries. Have measure the connector and to everyone who have ask about their size they are 3.5mm connector which is great as this are what I am using.
The connectors are tight which would make good contact and hard to pull out. These are great as they would not comes lose when the plane vibrate.

Cons: Non that I have notice.

Other: I will buy more as each motor would use 3 pair.

Pros: Simple banana connector sets for model or robotic elelctronics. I am using those for model gliders and electric airplanes. You will need shrinking tubes to cover those and to insulte. These can quickly be soldered.
Pricing is good and free shipping makes these unbeatable.

Cons: there are actually no negative sides. These are simple banana connectors. Only price per each connector would be less.

Other: If you ned banana connectors for your motor connections i can suggest these.

Pros: Decent price for these, much cheaper than buying them locally at a hobby shop. Good build qaulity

Cons: They could be cheaper

Other: If you need these for RC cars etc or just need some decent connectors that allow high current get them here they are well worth it and much cheaper than hobby shops.

Pros: prix dans la moyenne des magasins en ligne que je fréquente.
Je passe par DealExtreme lorsque je n'ai pas de commande en cours ailleurs car il n'y a pas de port ;)
La taille des ces connecteurs est de 3,5mm

Cons: really hard to find 500 characters for such simple itemp...
vraiment dur de trouver 500 caractère pour un si simple article...

Other: nothing

Pros: They are 3.5mm size, so perfect for my turnigy plush esc. Quality and price just can't be beaten although I don't know what I need 20 sets for.

Cons: None.

Other: Great. Plenty of spares for when esc/motors arrive without any! Quality is great. All do what they are supose to do - connect together! ;)

Pros: - Came in a bag - Nice build quality - Easy to solder

Cons: - They are a lot smaller than they looked like on the photos, still they are very much for the money - When they have been put together they are **** hard to take apart again, but thats maybe not is a bad thing?

Other: Some size specs good to know: Female: Length:7 mm Diameter:4mm Inside diameter: 3,5mm wouldn't try to solder anytime bigger than 2mm*mm wire though Male plug: Length: 7,5mm Tot length put together:17 mm

Pros: they are easy to solder to wires of lipo's and other things.
i use them in my (electric) rc boats
and in the rc boxes of my gas ones.

Cons: their a bit tight, so if you wanna unconnect them you have to pull pretty hard at them.
if your'e unlucky the tin will break.
so always use s-39 to solder them.

Other: i bought another set for more lipo's and stuff i will use in my boats .