48W 3300K 600x3528 SMD LED Warm White Light Strip (10-Meter/12V)

Pros: The striplight comes on a roll sealed in an antistatik bag. The striplight can easily be cut as there is a joint after every 3rd LED. So you can either use the 200 3-LED-sets or you can use the complete strip. As there are soldering points on each side of the 3-LED-set you can make a cut after 2 meter and then connect the rest of the 8 meter with an cable. Or you use 2x12V powersupplies if you do not have the minimum required 4A powersupply. I used the striplight with a 5A 12V powersupply as a replacement for 200Watt Bulbs in a basement hallway and this is much better now.
The back side of the strip has an adhesive tape, so it is very easy to attach to a rack, cabinet or anywhere on appropiate surface in the car. Even on raw stone in our basement the tape is working.

Cons: The light is not as warm as a bulb. It is not the cold blue light that some of the LEDs have. It looks a little bit yellowish... but this is only a problem if you compare it directly.

Other: Perfect replacement for bulb light in hallways or in the basement.

Pros: Warm light! I used 4m of this to mix with 6m of ~6000K led strips. Produces a decent blend, warmer than fluorescent light.
As described, it is 48W for the whole 10m. It might be slightly lower due to resistance of long wires or if you're using long strips but doesn't affect performance much.
Comes with mounting tape at the back. Easily stick on walls.

Cons: None that I can think of. But it can always be cheaper haha.
Lumen/watt isn't exactly the highest but it's decent.

Other: Buy it if you wanna change your lighting at home to LEDs.

Pros: Cheap, nice light color
Warm light!
Has adhesive tape on the back. Its strong enough so fixing is easy.
value for money
It's a good replacement for your lightning at home.

Cons: short lead on the end.
But hey, this is no problem

Other: I'm very glad with this product.
I would reccomend it to friends, i'm buying some more for myself.

Pros: it's easy to use

Cons: very small output power. It only draws 700mA at 12 V which means 8.4 W !!!! They mark it as 48W, which is TOTAL BULLSHIT !!! Other problem: high internal resistance ! If you have 12V at one side, you measure ONLY 8.6V at the other side, it means the other side will give you VERY LOW LIGHT !!!

Other: Big disappointment, don't trust what they mark (?) !!!

Pros: A lot of led inn groups of 3, very easy to connect (even without soldering). Can be dimmed with a standar potentiometer Very tough, almost unbreakable. Can be bend to make even 180 to fill an square area if needed

Cons: none so far

Other: Very satisfied with the purchase, and is the second one I bought.

Pros: Perfect illumination set for who is looking for a good enviroment for a home cinema! I do approve that! It cames with auto adhesive tape from 3m and works like a charm inside walls or ceiliings.

Cons: no cons!no cons!no cons!no cons!no cons!no cons!no cons!no cons!no cons!no cons!no cons!no cons!no cons!no cons!no cons!no cons!no cons!no cons!

Other: Buy it , you wont regret this.

Pros: I used 3 reels with one 12Vcc 15A power supply (124509) for a decorative indirect ilumination in a living room. It looked wonderfull. The 3300K warm light gave the perfect cosiness sensation in the room. The reel comes in an anti static bag that can avoid long transport issues. The reel is graduated so you dont need to measure how much of the strip lasts in it. The adhesive tape appied in it's rear is a very strong 3M tape. The cut marks and soldering points are a good way to do maintenance in case some of the smd led's die.

Cons: The adhesive tape is very strong so it can bring you problems during the application if it glues in wrong places or in your fingers. The adhesive tape also tends to get itself full of dust during the application making the proper attachment impossible. You must clean the area very well first. The strip is not completely flexible so it can be a little dificult to perfectlly circumvent some surfaces like a decorative ceiling. I bought 3 reels. In just one of them there are wire soldered in both ends. Dont use it to connect to another led strip because the current will fall making the light go less bright. Use an alternative circuit with other pair of cables to supply power to the other strip.

Other: If somebody asks me I would say to buy it before it gets more expensive.