7" Wide Screen TFT LCD Headrest Car Monitor with Remote Control Set (480*240px)

Pros: It`s a good TFT monitor for example car use. Easy to assambly. Remote controller works far. You can use all the menus and stuff whitout the remote allso. Picture is quite good for the pixsels.

Cons: The wireing isn`t show`n in the manual whits comes whit. But still quite easy to install. Red wire "+", Black wire "-", Blue wire "reverse +" (if needed)
The sticker whits comes in packing is poore, the glue doesn`t realy stick.
The TFT holder for standing is good quality. Strong build. And has many positions to put.
The holder for immersion is good build allso.

Other: Good buy for good price.
You can use it in many different places and purposes. I`m using to tune up car Hifi`s the smal extra touch. I regoment.

Pros: Great picture quality for a rear view camera. 2 Video inputs. Comes with a mounting frame and the standing mount from the picture. Small connector on the LCD side (just a tiny little bigger than the thickness of the cable)

Cons: don't use the supplied sticker to mount the standing frame. It does not stick very well

Other: It is being used in a beach rescue truck with a rear view camera. It works great. Great picture quality and brightness in sunlight.

Pros: Handy little screen. Bright colours. Good mounting options. Picture quality is good for the resolution it has. For Rc pilots trying this for FPV: It gives you static when the signal goes bad and when you lose the picture completely, then it goes blue.

Cons: Came with a dead pixel, but i guess its just bad luck in my part. When pressing buttons on the screen it also presses the lcd screen which makes those marks when you press a pc screen. So be careful with that, i just use the remote. Came with really bad instructions. The dashboard mount sticker doesn't really stick to anything.

Other: Buy it if you need one. It might not be the best in the market, but that's what you get for the price.

Pros: - easy to use (plug 'n play) - basic settings - long cable - matte screen - remote control

Cons: - Plastic feel cheap, but construction is good enough - No manual for installing (what voltage and what is the blue cable for

Other: A simplistic screen, but worth it's money. The plastic feels cheap, but the looks are great.

Pros: -Good, clear display -Easy to use, without reading the manual -Comes with all the cables and mounts you need -Remote control comes with a battery

Cons: -Build quality is not the best. -When you press the buttons you actually press down on the screen. To prevent damage to the display I would suggest using the remote. -Don't use the foam tape supplied with it, it's weak.

Other: If you're looking for a cheap 7"screen, this is it. Don't use the buttons, you'll eventually damage the display. Use the remote.

Pros: Good and bright picture quality, simple to navigate menu. Use the remote controller for the menu functions in stead of the buttons. You can mirror (reverse) the image but also put the picture upside down in case the camera is mounted upside down. This can be done via the 6th menu line 'DOWN RD' and use the arrow buttons on the remote control.to secect between RD, LU, RU, LD. Very useful. Looking the picture of input AV1 you can switch to input AV2 by connecting the blue wire tot +12 volts. Release this connection to switch back to AV1.

Cons: Feels like cheap plastic, it must be handled with some care. Pressing the buttons on the front of the screen: do not press to hard!

Other: Nice monitor for a good price! Mirror is done via the menu and not by the blue wire.

Pros: - Cheap - Work on 2S Lipo - Blue screen only at very weak signal (awesome for FPV) - Screen rotation modes

Cons: - Don't use buttons on the screen, to avoid harming the LCD - Zoom 16:9, could be letterbox format instead of anamorphic! This stretches the image horizontally instead of scaling vertically and cutting the top & bottom.

Other: Great product for the price. Recommended for FPV beginners, who want to start small.