Anti-Scratch Screen Protector for Apple 9.7" Touch Screen iPad

Pros: Perfect. After applying this to the ipad screen, i could not tell that there was a screen protector on this.

Cons: Some glare from the background sun/light still exists. Not sure if the ones that prevent glare will make much of a different - although mostly using the ipad indoors in a low light situation anyways.

Other: Should sell these in packs of 2 - as it could be easy to screw up and get dust all over the first application - it happened to me with the iphone protectors.

Pros: None, sorry.

Cons: First of all, it seems that they took an iPod screen protector and made it larger. It is easy to attach a screen protector to a device the size of an iPod. But the iPad is way larger. You have to be extremely careful to attach it without creating bubbles. And once they appear, you cannot drag it to the side as you would do if an iPod. So applying this to the iPad is a enormous effort. I tried several times just to find out that it was impossible not to create bubbles. And worst of all: the inside part of the protector screen was dirty. Even a tiny small grain will create a bubble. After several tries, the product was unusable. And it comes with only one unity. Only one.

Other: I don't recommend it. Try another brand or specification. I lost my money trying to apply a product designed from smaller devices. It should come at least with two units.

Pros: Quality, price
As good as any protector I've used on the iPod, PPC or Palmpilot

Cons: Careful prep and installation required - removal of 2nd (top) film pushed bubbles back under the main protector. It's the nature of the beast.

Other: No regrets - buy them three at a time!
Be sure to remove all grease and DUST from the screen before applying.

Pros: Harder, more rigid plastic... not softer plastic like some protectors. Top and bottom peel-and-discard sheets have paper tabs to reveal the protector within.

Cons: The large screen surface area makes it tricky to apply, but this is not the fault of the product (hence a 4 for 'ease-of-use'). The actual protection sheet could stand to be a few microns thicker.

Other: For the price, you get ONE SHEET and only one chance -- but the product is decent.

Pros: The protector matches the size of the iPad screen very well.

Cons: Spent about 15 minutes cleaning and removing every visible dust particle from the screen before mounting the protector. Didn't matter though, lots of bubbles and some particles got stuck on the sticky side of the protector. Had to trash it.

Other: I might order one more and try again. If you buy this get at least two, you'll need it.

Pros: Protects from scratches which would appear for sure after some time.

Cons: Takes time and good luck to install perfectly. Surface Feels a little bit stickier than iPad's screen without cover.

Other: This one combined with a silicone cover makes a good couple.

Pros: This is a fantastic screen protector. Cheap and protects the screen like it should, my iPad does not have one scratch on it yet.
The easiest way to apply this without any dust particles underneath is to buy some 99% isopropyl alcohol and put some onto a spectacle cleaning cloth and wipe the screen down. Lay the screen protector loosely at one end, then pull the screen protectors wrapping along with it while laying it down.
I don't have one single air bubble to this day.

Cons: Scratches easily. Cheap, so easy to replace.

Other: It's not that robust. I'll do the job for 1 month, then fail. Buy a couple. You'll need them

Pros: It works well like screen protectors should. Only one piece, but for this cost, its worth it.

Cons: The only cons is not from the product but the way it was delivered. Mine was folded in half together with the packaging and squeezed into a smaller envelop.

Other: If you want to buy this, buy a dozen pieces so that there is no way DX can fold all of them!

Pros: I´ve been using this protector form more than six months. I´ve already tested another two and always come back to this one. It does not affects at all the touch capability of the ipad screen and gives you real anti scratch protection four your daily use.

Cons: Well they are not cons exactly but in order to qualify properly the product some advices: - It is a bit difficult to set it down without bubles, so this is a good way of doing it: - Clean the space you are going to work in. Even a the smallest ball of fluff will create a bubble. - remove the firs protection film just the minimum to apply the corner and press with a card while yoy keep removing the protector film until is completely off. - press with a card (credti one is perfect) the bubbles to the nearest border. - remove the second film

Other: - It hapens from time to time that comes folded and then it is useless because it creates a wrinkle and it does not stick to the screen in this area. I will be nice the shop or the manufacturer put a har thing in the envelop to avoid this problem

Pros: I'm posting this review mainly because there are probably other people like me who are curious if this will work with a generic 10 inch Android tablet computer. It does, kind of anyway. I have the ZT-180 tablet and I bought this screen protector just to see if it would work, the price is certainly right for that. Turns out the dimensions of the ZT-180 and the ipad are a bit different, I had to cut it down a bit to get it to fit properly. The result looks kind of ugly but it fits over the active area of the screen and that's the important thing. As others have noted, it doesn't seem to impair the touch sensitivity either.

Cons: None really. It didn't fit my screen right but it wasn't made for it.

Other: If you have one of the many, many android tablet ipad knockoffs out there and it has a ten inch screen, you might want to try this screen protector out. Just be prepared to have to trim it down.