Pro Mini Microcontroller Circuit Board for Arduino (5V / 16MHz)

Pros: Small board with same dimensions like ArduinoPro Mini. Not exactly the same pinout like official Pro Mini but pins are well documented on PCB. Pins for FTDI USB connection do have standard layout.

Cons: Pre-soldered pin headers as nice and someone can welcome it but I will rather to have them drop in box only and solder only if project will require it.

Other: Great for making any prototype maily permanent ones to save space.

Pros: Board is 100% compatible with arduino IDE small and enough ram/pins for most project. Well packaged in bubble wrap to prevent damage.

Cons: Picutres shows non soldered pins but in fact; it came with pins soldered which is a great cons as i intended to use it on minimal space project... will have to carefully unsolder them...

Other: Good product and proce but will be nice to inform that it came pre soldered

Pros: Goedkoop arduino compatibel programmeerbordje. Werkt prima met mpide software. Heeft geen usb aansluiting maar heeft een usb programmeerder nodig. Is bedoeld voor semiproffesioneel gebruik. Pinnen zitten op breadboard afstand.

Cons: Niet alle analoge ingangen hebben een eigen pin, maar er zit wel een gat ervoor. Geen usb zoals gezegd. Dus usb programmeerder is noodzakelijk. Zijn hier te krijgen en ook niet duur.

Other: Er zijn ook bordjes met usb. Kosten een paar euro meer en hebben alle pinnen. Toch is dit bordje heel leuk om vanalles mee te maken. Er zit geen handleiding bij, maar arduino.cc is zeer uitgebreid.

Pros: Great microcontroller unit for electronics projects where size and power consumption matter. I am using these Arduinos for many different projects like controlling LED strips, data collection outdoors, measuring air pressure and humidity, controlling door openers and others.

Cons: Microcontroller needs a serial to usb interface to transfer programs, this is not really a bad thing because it makes the unit even smaller and less power consuming.

Other: perfect microcontroller for various electronics projects, to go from prototyping (breadboard) and "big" Arduino to working unit.

Pros: It's been delivered in good condition and well packed after 4 weeks into Ukraine. Easy to use based on a lot of example in the net. It can be accompanied with other modules and parts from this site. It's safe to buy on this site as soon as it's protected by PayPal in my case. Every step from ordering to delivery tracks by e-mails. Additionally you will be provided by tracking code that valid in target country as well. Moreover the package has been delivered right to the my door in spite of free delivery. The board is pretty small but very powerful for DIY projects.

Cons: Would be great to get it apart of included 2 Pins to get a flat board.

Other: I could not find any cheaper place than here. Just get your board with good quality for your DIY projects for that money.

Pros: Good quality for the price. Really tiny and working fine.

Cons: It should be nice to know that it is not an Arduino Pro Mini, but a Funduino. Anyway even when some pinouts change according to the original Arduino version (see other comments) the FTDI remais the same. Rest is all pros.

Other: Just buy it for your tiny DIY ideas. Reaaaaally tiny! (I also bought a tiny bluetooth module to use it with it. You can find it here: http://dx.com/p/wireless-bluetooth-rs232-ttl-transceiver-module-80711)

Pros: - it is really cheap for what it is, and compared to buying something like this locally. - it works well - no flux, good joints

Cons: !! this unit appears to be a 3.3V unit that received. while the PCB has 5V on the underside next to the VCC pin. when i supply 9V on the VIN, the regularator is only supplying 3.24V to the 5V pin. the unit is working fine, so either the regulator is wrong or broken, or most likely the PCB print is copy paste from the 5V model. - came shipped with fixed headers - some of the pins are long and short (too much heat has made the pin slip)

Other: my unit worked on 5V, but would have likely blown quickly if i didnt pick this up. im happy to keep, just pitty there isnt better QA at DX to stop this. the only flaw with this item is the 5V label on its belly - pending further research on the regulater and amtel chip.

Pros: Cheap, small, 3.3v and atmega328 chip

Cons: No manuals to find, hard to get it run the first time. Not sure about the Mhz 8 or 16?

Other: Good buy for the money