Breadboard Jumper Wires for Electronic DIY (70-Cable Pack)

Pros: They're cheap, and very good for prototyping on breadboards. No more cutting cables too long or too short, just recycle these flexible cables.

Cons: They smell a lot like rubber. Perhaps the smell will wear off some day.
Also, the colours aren't devided great. I bought three sets, only had one single long black cable and 5 short blue cables. Both numbers cant' be devided by 3 :-)

Other: If you like working with electronics and have some breadboards, this is a very good tool for prototyping. Just plug, unplug and reuse these cables.

Pros: They seem like cool little wires that could be useful in prototyping. The end pieces are easy to hold onto and are great if you don't want to be stripping and tinning wires for each project. The wire its self seems to be OK quality. I want to say 26 or 28 AWG wire.

Cons: The end pieces themselves seem to be kinda shobby injection-molded peices. But, they seem sturdy enough for what they do. I'm not sure why the wires smelled heavily of gasoline when I opened them. I haven't tried lighting one on fire or drawing too much current through it. Perhaps a test for later.

Other: I look forward to using these in project :) The quality is ok and suitable for most needs I would think. I felt it was a good deal for the money! Rock on DX!

Pros: fits perfectly in my arduino controller. enough different collars, so you don't get confused easy to solder to an PCB fits very well isn't hart to get it into the board but it doesn't fall out the board if you turn it upside-down

Cons: cant think of any cons accept the price

Other: must have if you use breadboards to connect things

Pros: Good buy for prototyping. Good build. Good everything bar the smell.
If you question this product YOU ARE AN IDIOT :)

Cons: smells like a two dollar store (plastic/gas smell)
built a bit rough and got lots of burs nothing significant

Other: good good good product nothing bad just buy it good for everyday do it yourself elecronics

Pros: Very price, a lot cheaper than what my local hobby store sells at.
Has a good assortment of wire lengths and colors.

Cons: Not the best build quality, but will defiantly do its job well (you get what you pay for). I have seen better ones but they charge a lot more.

Other: Get this if you need to do wiring on a breadboard, it's so much easier and less time consuming than cutting your own wires.

Pros: Different lengths and colors (very useful to keep track of your schematic) Nice for fast prototyping (get one, insert it, done)

Cons: Not the best quality, but good enough for doing the job (the plastic ends looks trashy) The wires are smelling heavily (do not know why?)

Other: Buy that product if you plan to work on a breadboard. Cutting your own wires would be much more work.

Pros: Simply perfect!! This wires are perfect for everyone who is working on DIY electronic! I use them with arduino, leds, components, on protoboard and breadboard!
A lot of wires on one package, of a lot of colours, and diferent size about 5 cm to 15 cm.
Perfect to do things without problems on protoboard, so confortable, put them on the little holes of a protoboard, quit them, so definitely perfect for electronics and little projects.
The price is so cheap, the package of 70 wires its perfect, i bought two packages to have a lot of wires to do good and complicated projects on a protoboard.

Cons: I think there is no cons. About 70 wires on one package, i broke one or two wires in about more than a month.

Other: Arduino, Protoboard, Breadboard, leds, simply excelent, confortable, good quality, good package, quantity of wires of a package is perfect, 70 wires.

Pros: * very convenient: I generally used solid-core wires on my breadboards, and those wires are much more convenient * very cheap: those 70 jumper wires give a total length of 9.70m for a low price; a 10-meter bobin of solid core wire costs almost the same price here

Cons: * among the 50 12-centimeter wires, I received 10 green, 10 red, 10 orange, 10 white and 10 blue; I wished I would get some black ones * when I'm prototyping, I often need short connections; 12-centimeter is much more that I generally need; I think the pack would be better with some shorter wires (for example some 6-centimeter and 9-centimeter ones) * the black tip as a diameter of about 3mm, while the distance between 2 holes of a breadboard is only 2.54mm; hence I can hardly put more that 4 such jumper wires in adjacent holes

Other: I love those wires, I will probably by one more pack.

Pros: A lot of wires for this price ( locally it is more) Soft and thin - easy to use on a breadboard Saves a lot of time to make my own cables rubber cap can be removed if needed

Cons: Thinner that should be for a breadboard or Arduino - BIG Con . Can be used only mostly on accessories. They are flimsy, so they can disconnect easily if board/Arduino is moved More colors needed More long cables needed

Other: Good Enough for this price. Just received - Will try to submit another review in 1 month of use

Pros: I simply cannot find there already mounted/soldered cable nearby!! if i want, i have to take ide/scsi ribbon and try to find the plug to sold etc....
This is simply making me win money, time (most) and are so easy to use.
I already have used them to "update" the wiring of my diving computer companion, this was already "DIY"ed because it was old. But the first "correction" were also have tighting problem.
I have taken the cable and replaced all connexion (9v battery, intenal wiring, connection to my diving computer thanks to the furnished pin (lucky i am, correct size)). Now it's working marvelously :-).
I also used sku.80207 which is the companion of this set.
I also have used them to connect additional led to my computer extension card so i can have all indication shown outside, this with only cutting one in 2 parts, so I have both pin to connect to tinny holes (yes, indeed, this is not a normal design as normally pins should be on the extension card and sku.80207 used in that case) connect them and connect a simple led the other side (i have added additional wiring to have long enough cable).
I was searching this kind of pre cabled wires for years !!!
My futur usage: LED DIY wiring, but this can be a cons to see

Cons: I find the wire a bit too tin in diameter, so high Amp/volt can be an issue, will see in other "DIY" plans. This is a small con againt pro !

Other: Magic wires, pre mounted, pre soldered, what a gain of time !