Car Portable Device/Gadget Holder and Windshield Mount

Pros: Very flexibile, strong holder, can be adjusted to nearly all kind of portable devices. Suction is realy strong and once you install it on your windshield, it will hold there ages, cannot be removed easily without releasing the handle on suction. I tried it on tile in my kitchen as well and it was the same... just perfect thing!

Cons: I didnt find anything... just the box it came in, was broken and damaged coz the shipping, but this dont have anything to do with product.

Other: I can recomend that...

Pros: -Can hold heavy things like ham radio screen, gps receiver etc -The head of the device can be turned 360 degrees -Flexible part is tough enough to stay static -An extra sticky part is included to use with non-smooth surfaces -Can be mount and unmount easily

Cons: NO

Other: You can detach one equipment and simply set it suitable for another. If you get into dumpy road then it slightly shakes but this is not an absolute con. I bought another one today.

I use with palm pda, magellan gps receiver and my kenwood tm-d700 ham radio control unit seperately. I can detach one and attach another easily.

Pros: this is an awesome holder/mount for the car. - it comes with an extra piece in the picture so that you can stick it on the dash or any other place in the car that does not have a smooth surface - the suction is incredible - can rotate the 90 degrees in each direction and there is a ball joint that can rotate
- this is perfect for iphone/itouch if you want to landscape, no need to take it off and put it back in landscape mode
-comes with vent clips to hook up to your air vents in the car if you want

Cons: none
- except one of the small piece attachment in the back came off which doesnt have much of an effect on the use so i just glued it up

Other: - get it, it works and its cheap with all the features

Pros: Está fabricado con un plástico que parece bastante robusto. El brazo que se puede doblar se mantiene firme (cuesta mucho doblarla). La ventosa se agarra bien a la ventana

Cons: La unión entre la pieza donde irá colocado el móvil y el brazo no está muy ajustada, con lo que se mueve un poco, haciendo el efecto, en movimiento, de vibrado de la pantalla.

Other: El tamaño máximo que permite no es muy elevado: es perfecto para un teléfono móvil, pero si tienes un GPS de pantalla muy grande lo mismo no te entra.

Pros: * Can handle small and relatively large devices.
* Adjustable an many ways.
* The head holder rotates on 360 degrees. And after locking it, it's still possible to rotate the head 90 degrees CW/CCW.
* Can be mounted on any flat surface or to air vents (it has vent clips in package).
* The suction is very strong.
* The price. :)

Cons: * There is a small backlash in the head rotating mechanism.

Other: This is very useful device for any mobile/PDA/GPS gadgets for mountig in your car. I use mine with PDA working as GPS navigator.

Pros: Easy to install
Great features make it possible to tighten object in width and depth
Strong build
Versatile product which has a wide range of uses (car, laptop, desk etc) as it holds not only PDA's, but also GPS devices and other similar things and you can hang your keys on it!

Cons: A tad overpriced
The bendable arm is very firm which makes it kinda hard to adjust. You need to hold the base in order to do this.
Almost has to many hinges and bearings, but at least theyre all strongly build.

Other: Get it, because its worth it :)

Pros: Let's see, everything.. the price, really good quality. I got mine about a week ago and i can't stop using it, It works great with my w580i, psp and tomtom 130. the neck/arm is strong but easy to adjust if you have to.

Cons: none.

Other: if you need an universal holder, this is the one to get!!!!

Pros: Let's see, everything.. the price, really good quality. I got mine about a week ago and i can't stop using it, It works great with my w580i, psp and tomtom 130. the neck/arm is strong but easy to adjust if you have to.

Cons: none.

Other: if you need an universal holder, this is the one to get!!!!

Pros: Well, I used to use many similiar holders. I use them, mainly, to hold my PDA Pocket Loox 720.
So this holer keeps my loox tight. It doesn't wobble or screech.
it also comes with a big round pad for the sucker. to place it on non flat surfaces

Cons: Well... when your holder is empty, the bottom pat (which could be locked) makes some screee noice 8) not a big deal

Other: got some GPS soft dor your mobile or PDA?
buy this holder 8)
PS Well, I used to use many similiar holders. I use them, mainly, to hold my PDA Pocket Loox 720.
So this holer keeps my loox tight. It doesn't wobble or screech.

Pros: I just got this item now and have been playing with it for a while. The suction cup is a flat piece and there is a lever that you move which pulls up the inside of the suction cup. You put the cup onto the surface and then push the lever. The result is amazingly strong suction. I wouldn't be surprised if this could lift a 30 lb glass block.
The neck is very very stiff, It bends trust me it won't snap but it feels like it will.

Cons: When you snap the head piece onto the neck for the first time, remember which way you pushed the head because you have to push it the other way to take it off. I forgot when I did it and it is impossible to know just by looking. I had to push it one way really hard and then the other way to get the head off. At first I pushed the wrong way and I was afraid that I was going to snap the clips. I didn't but pay attention so you don't risk this.
The vent clips are very hard to put on, in fact I still haven't been able to do it.

Other: This item does exactly what you want it to and has only a few drawbacks which aren't even drawbacks they are more "things to be careful about"