Cooling Fan for VGA Video Display Card (4cm*4cm)

Pros: Great 4cm 12V DC 0.08A Fan, it is very fast and the air flows very well.

Cons: I think it is very fragile, but for this size, I think it is normal.

Other: Great fan for small projects. I bought 4 for my Hard Drive case!

Pros: This fan is great. I was looking for one at a local electronics store and it cost about 15 times this. It works, its clear, its very very quiet and it's pretty easy to install.

Cons: I measured it and it's actually a little smaller than I expected, which is actually OK, glad it wasn't bigger.

Other: For the price, if you are needing this, it's great.

Pros: Is perfect for almost all Video/audio Schede. Is cheap. Is easy to install. Is 4cm 12V DC 0.08A Fan , if someone want to know the DC.

Cons: Is a little more fragile than i expect..

Other: Is a great choise if tou have a broken old fan on Vga schede.

Pros: It is very useful. its so small and it works fine. perfect to put in electronical devices to refigerate any kind of cases, pcs... muy útil, perfecto para pequeños aparatos que se calienten mucho, para hacer corrientes de aire para refrigerar cosas etc etc etc etc etc

Cons: a bit fragile for me a bit noisy fan un poco ruidoso un poquito frágil

Other: it costs arround 1€.... try to buy a cheaper one in your computer store... por 1€ no te compras ni un paquete de pipas..

Pros: - Very small 12v fan - Works perfectly - Very quiet

Cons: - Power and Ground cable is very short - If you wanted to screw it down totally flat, the fans blades will probably touch the surface you are screwing it to.

Other: If you need a small square shaped fan, buy this. I did not need to screw the fan down flat so I had now trouble with the fan blades. I also extended the wires by using some spare wire and electrical tape.

Pros: Good for low profile motherboard chipsets. Fit is near purfect. looked high and low for a fan to fit my Foxconn NF4K8AC motherboards nvidia southbridge chipset, and found this one.

Cons: no sensor on the fan. shame really, could of done with one. Needed to be packed a little better as the center of the fan had a crack in it, like it had been crushed at some point.

Other: spot on for me DX

Pros: ~ it's clear. ~ it spins? ~ good for small projects! ~ front screw holes.

Cons: ~ no backing frame.

Other: ~ not bad, if it's what your looking for! ~ it fits into an altoids tin and it spins round and round and round...

Pros: I love to have these small things around here at home. They may coem usefull to so many things. I have had many versions of small fans but this ones is rly good for its price. One of my favorite spots to use these are to cool down diods when they are mounted in clusters. They get rly warm (diods) and then this fan is great to cool things down a bit to get a longer lifetime from the diods. The are good to many other things to as they are so small and fits everywere. The build quality is rly good for the price. Its very close to extreme price on this one i think :)

Cons: Someone wrote in his review that the cables came loose. But since that is not a problem with mine i cant give these other than 5 i Build Quality. But I think everyone shuold know about it, even if its easy to fix. There is no backing fram on these fans either, that may be a prob if someone wants to mount it "upside down" and get some air going the other way!

Other: Rly good product to have around if you like to do some DIY. You probably wont find these any cheaper out there. Atleast not around here were I live. They seems to be running nicely here at my DIY´s. Not noicy at all.

Pros: This is a great little twelve volt fan. I left it running for several hours without a problem.

Cons: You will need a spacer if you surface mount this fan. Otherwise, it will scrape. I wish the frame enclosed the sides and had a grill on the back, but I suppose it is intended to be internally mounted.

Other: It all depends on what you plan on using this for. The title says that it is for a video card, but I would guess that most buyers will use it for other applications.

Pros: Small, can be used for the hard to fit cooling operations. Has mounting holes so it can be easily installed. Build quality is not horrible, it seems pretty sturdy for something this small. Clear so awesome lighting affects can be achieved. Moves a decent amount of air for its size.

Cons: Short cable length. Some may consider it a little noisy, but its a small fan and therefor requires a fast speed to move sufficient air. Tbh no real cons.

Other: Great tiny fan which works for many applications. Cheap and worth every cent you pay.