CYEE055YW080A 3W 80-Lumen 3000K White LED Emitter

Pros: Nice colour (warm white), reasonable output.

Cons: No way to tell what is the plus or the minus lead is. LED's could have a bit more output.

Other: Good LED's with a nice warm white tint at a reasonable price. Has output almost equal to 10 watt halogen light bulbs.

Pros: It is a real warm tint emitter in luxeon form-factor. Base is electrically insulated from diode so it can be soldered directly to heatsink, used in serial connections without special measures and so on. Is bright - emits ~50 lumens at 250 mA current. Dome is hard glass and do not go off easily.

Cons: Weak legs - dropped led from table and plus broke off.

Other: Not a direct Luxeon replacement, but good for DIY projects. Yellow-green tint would be best for garden lighting.

Pros: Nice warm colour, with good brightness. This emitter seems to be very tough. Polarity-info: One pin comes expanded out of the case, there is a small blanked stripe on it. This is logical the -/GND pin ;-)

Cons: -None really cons. I´m only missing a datasheet or an info about the manufacturer an type to search for the specifications.

Other: I rebuilded a "working place light fixture" with this emitter and SKU 13552 (3W-driver). The achievement is great, im very satisfied. Measured: 3,7V/630mA ->and a very good light-output...perfect!

Pros: This led is bright, and fits perfektly into SKU 13741. I used the driver SKU 13552 to power the led.

Cons: The light is yellow-green, not very plesant. I don't know what to use this light for. Gets hot, but I guess most leds do.

Other: Can only be recommended if you enjoy light with yellow-green tint ! Too bad i ordered more than one...

Pros: A very high luminosity level. I tried it in a long hall without any other light and i saw very well.

Cons: Be quiet to the very high luminosity level: I think it can burn the eyes. (dangerous) It needed a thermal dissipator. I did not put anyone and now, my LED id burned; dead. Now, its luminosity is lower and blue. A datasheet could be usefull to determinate the thermal resistor and dissipator needed.

Other: I will buy some others to try a little. If OK, i will create spot light in my house.

Pros: The led is really bright, the shell is solid which gives the led a more tough feeling feeling. The light color is pure white.

Cons: I´m missing a datasheet from the manufacturer search for the specifications of the LED. Don't look into the LED it will really daze you for a moment.

Other: Worth the money I am probably buying more of these soon.