FUJIK Silicone Thermal Glue (50ml Grease-Like)

Pros: This is a Thermal Adhesive (GLUE!), not Grease! If you are looking for a less expensive, less permanent alternative to thermal epoxy this is it.

Cons: This is a Thermal Adhesive (GLUE!), not Grease! The title description is WRONG! Think twice before using this to lubricate the threads on your expensive new flashlight!

Other: This is a Thermal Adhesive (GLUE!), not Grease! I use this in place of Thermal epoxy in all but the most critical applications, because it is cheaper and more convenient (no mixing), and you can pry the components apart if you need to. The bottom line is that I am very happy with this product, but they obviously need to change the description.

Pros: This is a BIG tube of thermal adhesive that dries into a rubbery hard substance. I use this for everything from mounting LEDs to coating wires.

Cons: NONE

Other: Best purchase I've ever made!

Pros: It is a fairly decent glue which dries fast-ish. There is a lot in the tube which is almost as big as a tube of toothpaste.

Cons: Could be stronger but meh.

Very messy (i can still see some on my fingers after swimming)

Other: No problems with this glue, no reason not to buy it if you need this quantity.

Pros: There's a lot of it. I'll never run out.

Cons: I don't have a lot of needs to make use of so much.

Other: If you need cheap glue this stuff works okay. I haven't tried to pry apart a CPU heatsink or anything, and I certainly don't have any way to gauge how well it works as a thermal transfer couplant, so I guess this whole review is worthless.

Pros: - plenty of stuff in the tube - performs quite well - handy tip included

Cons: - quite sticky

Other: Great item

Pros: Big tube. Sticks good. Disipates heat well.

Cons: None.

Other: Don't know if I would trust it for CPU heatsinks. For led heatsinking it works well though.

Pros: I used it to attach LED stars to a plate acting as heat sink. It worked great, gives a solid joint, set quickly, and was thick enough not to move too much around even before setting. You dont need to use much, so the tube will last you a LONG while!

Cons: Not much wrong, price is ok, and it works!
Dont use this if you want to remove or move around your pieces later, use thermal compound, this is an ADHESIVE.

Other: If you need thermal adhesive for LEDs etc get it.
DOnt use it for cpus in PCs!!!!!

Pros: Compared to thermal epoxies, you get an enormous amount of product for the price.

Cons: Can be messy. I doubt it is as strong as Arctic Silver, but I can't really quantify that.

Other: Can be a nice alternative to thermal epoxy, especially if you need larger quantities.

Pros: Very Good. Same price as a 7 Ml bottle at radio shack. In canada.. Works as heatsink compound. At least my comptuer sorta likes it.

Cons: Way to big. to carry around everywhere.

Other: Very Well. works great.

Pros: Big tube of thermal glue, seems to work okay on LED headsinking.

Cons: Too big tube of thermal glue, if you only do this stuff occasionally you'll never use the whole tube.

Other: It's not strong glue like thermal epoxy, but does cure. Best comparison strength wise I can think of is latex caulking.