High Current Ultra Plugs T Connector (10+10-Pack) + Shrink Tubing (20-Pack) Set

Pros: a)Very well build with good tight connectios b) Very nice to have the heat shrink included

Cons: a) Plastic not as heat tolerant as 'genuine" deans connectors
b) Shipping took longer than expected and item was apparetly out of stock after I had ordered

Other: Product is so well priced that I took the volume buy discount. My RC friends readyly bought the ones I had spare.

Pros: -Price!
-Does the job.
-Nice with schrink tubing and connectors ready in one bag.

Cons: -Not perfect quality.
-Seems like different batches are not 100% compatible. (Might require some force..)
-Plastic might get damage if you are very slow with the soldering iron.

Other: -Unless you are gona make a space rocket, buy them!
-Buy a lifetime stock not to risk getting different batches.

Pros: - Affordable Price
- Reasonable Price
- It works
- Mate well with all original Dean that I have
- Come with Heat shrink tube
- It just feel and look like the real stuff

Cons: - Should have choice for all male or all female. Because the need for all male is more because the battery packs came with the female already.
- Will be good if heat shrink can be replaced with more connector, or a lower price

Other: Cheap, good and does the work.

Pros: Got em in San Dieog 8days after shipping. You get a lot of connectors for not much money.... that's always a plus! They are really tiny, smaller than i thought they'd be ...a good thing i think. The base measures ~0.5" x ~0.25" Plug together nicely, seem to be made pretty well. Awesome.

Cons: Could have holes in the solder base to loop a wire through. I would suggest using solder paste, as it is lower temp and the plastic melting while soldering is a concern. Use lots of flux. Could have ribs on the connector for finger gripping also, as they are hard to pull apart and pulling on the wire becomes the standard method. This is all being too picky though, so almost not even worth adding.

Other: If you need a bunch of power connectors, and don't need to worry about compatability between dean's ...get em. A no brainer, as 1 dean usually costs as much as this whole pack.

Pros: The T ultra connectors are very nice for almost every high current job!
The male and female connectors fits very well together. This is very imprtant for high current connection!
I have used them for serveral connctions now and the are doing well!
Now power faillure at all! I love them!
I like the included shrink tubes the good of quality.

Cons: The plastic is a little weak so watch out when you are soldering the connectors.
Or when you are heating the shrink tubes.

Other: For the nice price they are very good!
None of the webshops can't beat this!

Pros: + Good mating for high current capability
+ Polarized
+ Fantastic price
+ Mates well with original Deans Ultra

Cons: - Hard to pry apart (same as original)
- No polarity marking (original has this)
- I only got black shrink tubes, no red

Other: If you know how to solder and can do a quick job at it, then these will be more than adequate and you will save a tonn of money.
A tip for easy removal: Use the soldering-iron and melt some ribs around the sides of the connectors. This will give your fingers something to grip and ease the stress on the wires. I'll try to uppload a picture later of how this looks.

Pros: They have a very strong connection, if they come free during use you are doing something seriously wrong. Much better than using bullet or spade connectors. Smooth flat surface give a good connection area.

Cons: Little hard to part when new.
Soldering tabs really need a hole to make a secure connection to wire.
Heat shrink is adequate, but I prefer adhesive lined.

Other: Changing all my projects from bullet to these now, they are a much better alternative.

Pros: really good plugs for rc trrucks etc with high current electronics... and extremely cheap price for a lot of these plugs... cant go wrong really... comes with shrink tube as well thats a nice bonus... good deal from deal extreme as usually thanx

Cons: noticed that when soldering the plugs was a bit wiggely inside the plastic... nothing that causes any issues atleast yet... i doubt it even will.. but if a con is required thats the only one that came in my mind...

Other: buy them

Pros: Cheap
Useable for low current applikations like charging if you don't want to waste a original one.

Cons: After testing the voltage drop of several samples i have noticed it's significantly higher than original connectors.
Passing 4 amps different samples of the original drops between 0.3-0.5mV (millivolts).
This product different samples had a drop of 2.9 to 6.2 mV.
Contact elements (propably) made of brass, not copper.

Other: Ok if you know the limits of the product and can use it for something where they wont apply.

Pros: I have these on all my rc batteries and esc's,I'am using well over 30 sets all of them preform well. I just bought 20 more sets as these are becomeing hard to find!!! Get them while you can. 6 dollars for 10 sets you cant go wrong!

Cons: 40 to 50 amp max which is fine for me
some are hard to get apart(use a small amount dielectric grease)
You have to be quick with solder iron(30 to 40 watts iron works well) and sugjest that you tin wire and plug ends first!

Other: If you need quick connectors for RC batteries then get these, I did!!!