High Performance DC Brushless Cooling Fan for for PC Video Card

Pros: Good fan and heatsink, fits well, I used it as chipset replacement fan

Cons: None for the price

Other: Works well, when it breaks I'll get another one

Pros: Its cheap as chips and works fine.
It also runs silent and should be easy to keep clean.
And the pins are the right space for your Northbridge chip on the motherboard.

Cons: The area that comes in contact with the chip will need smoothing. Also the plug is the wrong size.

Other: My fan blew on my motherboard and I took the fan out of this and replaced the dead one with the one out of this. But the design of this heatsink is work the bother of smoothing the contact area.

Pros: -Really cheap chipset fan.Good for southbridge or an old graphic card. -Aluminium heatsink, dissipate heat well. -The fan blows alot considering it size. It is really quiet too.

Cons: -The shape... A butterfly... come on, who designed that? - The shape would make it a little difficult to install it on some chipset as electronic components surrouding the chipset might be in the way. -The power connector is for a graphic card cooler. It's not really a problem if you can solder a new connector like me.

Other: Before you buy this cooler, make sure the area where you plan to install it is realtively free of electronic components.

Pros: -quiet fan
-Looks snazzy
-works good on older video cards
-Stronger clips then original cooler on my card
-pins that mount are 56mm from center to center

Cons: The bottom surface could be a little smother, however all the other video card heat-sinks i have ever seen have had the same kind of finish.

Other: A excellent replacement heat-sink and fan for older video cards.

Pros: It's work as expected
You put 12 volts and the motor moves
and work very quiet

Cons: the shape is not so compatible with the space of any card
the power connector don't necesary match your card

Other: I bought this as a replacement motor for my nVidia GeForce heatsink but don't work because the screw of the motor don't match... and allways knew that this complete heatsink itself don't match the mechanicals holes for a direct replacement.
So now i use this as a cooling for my peltiers cells :P

Pros: Great fan useful for older cards. Moves a lot of air. Other then the defect build quality is great and sturdy looking. easy to mount and use, can even be used for some chipsets/northbridges if length between holes is the same as the plastic clips of this item.

Cons: Instead of completely horizontal flat surface on the bottom mine was at a slight angle which made it pretty much unusable. Contact with chips was made only on one side while the heatsink was raised a little on the other, no ammount of thermal compound can fix that. Price could be a little lower as always.

Other: Great product for the price and highly recommended even though mine arrived defective.