High Quality Precision Multi-Tip Screwdriver (7-Piece Set)

Pros: The driver itself is nice and small, and so are the bits. Would be excellent to use on small screws (but definitely not medium size ones)

Cons: Not all of the bits fit into the handle! (even when one bit is in the driver) This is a huge inconvenience, and negates the purpose of the bit holding capabilities. Also, the bits do wiggle even when firmly secured. The metal is not finished very well either.

Other: Decent driver to use on small screws.

Pros: An excellent mini screwdriver for fixing small things around the house. A total of 6 bits are available (tri-bit (shaped like a Y), standard, Phillips, and 3 Torx (star shaped)). The bits slide in relatively easily, and the nut tightens well so that the bits won't slide out.

Cons: You can only store 5 bits in the barrel, even though the screwdriver set comes with 6 bits. The last bit must be either left exposed (i.e. in the operational state), or you will have to sacrifice one bit. So far, I have not found a purpose for the tri-bit, so I do not usually carry this in the screwdriver barrel. The threads on the screw cap that cover the storage barrel is a little squeaky, and I am afraid that it may become loose with time.

Other: For this price, the advantages outweigh the disadvantages. If you need a small screwdriver to perform small hardware tasks at home, or require a small hobby screwdriver, then this is the perfect purchase.

Pros: Nice small set of 12 differend screwdriver heads and a solid metal body in which you can store 5 of the 6 bits (one has two). I was surprised that it even has a tigram (or similar) head. I tried and it does work on Nintendo's screws.

Cons: Metal isn't the sturdiest and the threads make a "cheap" noice when you screw the cap on or off.
Would be nicer to carry around if all the bits went in to the body, but you have to have one screw'd on place all the time.

Other: Nice and cheap little screwdriver set with 12 differend driver heads.

Pros: Works perfect for what i bought it for, general dismantling of cellular phones/small electronics. Good grip for fat fingers (Deep Texture)

Cons: Burr of metal in tip caused what i thought was a non locking unit. (was blocking the bit from tightning) Chrome/Nickel plating i would rate at 6.5 on a scale of 1-10 due to what looks like chipping.

Other: an item that turned out to be better then i thought based on the price, once again DX exceeds my expectations with a great priced better then average item!

Pros: + Packed with a bunch of rare tips, making it extremely useful for unscrewing all those consoles and phones
+ Has a place to store them
+ Nice design
+ Cheap, really
+ Even with crappy build quality it's still pretty strong

Cons: - Pretty crappy build quality
- Covered in oil a bit, damnit :( And still lacks oil in part where it's needed.
- Can't store all the tips, one must remain.

Other: I think this thing still should be in tools collection, however I expected much more from it.

Pros: I use this at work on cars. I use this at home with computers. I use this in my garage on my motorcycle. This thing rocks. this thing will cost many, many, many times more then it does on DX. Get it.
-Many Rare tips. Plus flat heads of various sizes too.
-Steel Construction, seems strong enough on the places that actually need it.
-Highly Portable

Cons: -Canister inside the item dosn't hold all tips. Must have one out. really this isn't that bad, since I would ahve done that anyways. Why would I want to unscrew the cap, pick the tip I usually use regularly, screw back the top, then install the tip. Not really that bad people, this thing is still small.
-The caps are kinda thin, so be careful with them. Hey at least they are not plastic. They are stronger then they seem, trust me.

Other: Okay, the quality isn't exactly the best, but its more then adequate for daily use. Highly portable, and rugged enough for my needs in the shop, garage, or work bench.

Pros: It's a very nice tool to have as there 7 tips!!!
Great quality the threads are smooth the clip is strong.
Came in a box rather that bubble rap and has some instructions..
Very nice design and i an sure it won't break..

Cons: You don need to press hard when unscrewing as it's not a tight fit..
Would be nice if all the tips went in the back compartment. Does get scratched easily.

Other: It's great quality, cheap, 7 tips and won't disappoint.

Pros: Small
Cheap
Multi-Purpose

Cons: Cheap metal housing (bits seem strong though)

Other: Handy tool for a decent price, its always good to have some torx bits for getting into certain consumer electronics (I needed mine for an iPod).

Pros: Very strong built quality. + Has a place to store them + Nice design + Cheap, really

Cons: No grip at all after few use. The screw tips fall even after fully tight.

Other: No grip at all after few use. Adding 500 characters... Adding 500 characters... Adding 500 characters... Adding 500 characters... Adding 500 characters... Adding 500 characters... Adding 500 characters... Adding 500 characters... Adding 500 characters... Adding 500 characters...

Pros: Includes most usable tips and a few rare ones. Quite strudy built. Compact and very easy to carry because all extra tips are stored inside. Most importantly - does the job.

Cons: Build quality is good enough but it does not look too elegant. Threads are quite rough. There is no rotating cap on the back which many precision screwdrivers have. If you need to unscrew a really tight screw the tip may start turning inside the driver and thus failing to unscrew the screw - no matter how tight you fixed the tip.

Other: Really useful tool. If you need micro screwdrivers sometime (who does not?) and do not want a professional set - get this one. Could be very handy for computer professionals but requres a "tight fit" mod I described in other thoughts - because otherwise it might not unscrew some PC case screws.