Logic Analyzer w/ DuPont Lines and USB Cable for SCM - Black

Pros: Simply followed the instructions in the comments and off it went. I will be buying a second one

Cons: do you care if the board rattles in the case a bit? I did not, but ended up putting a few drops of hot glue in the bottom. No rattling now. The label on the top does not line up with the LEDs. Meh.

Other: Buy it. You will not regret it. This LA is so cheap that there is no reason not to have one.

Pros: Works greatly with USBee AX (Standard, Plus and Pro). Download at => http://usbee.com/download.htm It´s only logic analyzer, so the scope doesn´t works. You have to setup the buffer size and start the acquisition. After that you can decode pratically any digital signal. I tested with I2C and USB and it worked fine.

Cons: Scope doesn´t works. It´ll be fantastic if it comes with scope function too.

Other: None it is a 24MHz 8 bit logic analyzer for only U$11.70 ?!? Buy it.

Pros: Very small and neat. Comes all packaged in a real antistatic bag. No analog input! VID: 08A9 PID: 0014 ATMEL 24c02N SU27 hardwired for I2C read address A0 NXP 74HC245 100K pullups with 100R series hardwired as permanent input buffer, so no output. CH0 (not CH1 as labeled) is monitored after the buffer with an LED that lights when is pulled to ground. Based on Cypress FX2 CY7C68013A-56PVXC AMS1117 3.3V NOKIA DKE-2 mini USB cable Single pin female connectors on a colored flat cable.

Cons: PCB designed with vias over pads on an ugly ground track where some solder joints are barely done. USB input fuse is a 0R resistor. A few decoupling caps and USB shield connecting parts to ground are missing.

Other: Easy to open. No screws. Just pull the top from the 10 pin connector side.

Pros: Really good, works equally than the original. Tested with usbeesuitesw plus asxw64, both over Windows 7, 64 bits. discover a lot of protocols. pretty high sample rate for the cost. cheap cheap cheap cheap.

Cons: Feels a bit fragile... plastic. noise inside (needs a better case) does not include clamps, only simple cables it's a copy of the original product, so... It's not sooo good to buy it.

Other: Good product if you cannot afford the original, and you need to debug some protocols.

Pros: Does the job quite well. Delivered with DuPont and USB cables Quick delivery (for DX standards) Extraordinary low price!!

Cons: No documentation, no software Finding right drivers can be an issue Print is loose in housing

Other: Searching for a simple Logic Analyzer without the extra s? You ain't gonna find anything cheaper than this little device. Remember: Before getting the thing working, you need a trip over the internets finding the right drivers and software. If you succeed, you have a great LA

Pros: Very nice for the price. If you're willing to put some effort into it, you can reflash the built-in EEPROM, so it identifies as a Saleae logic Logic analyser instead.

Cons: The USBee software is kind of crap. CWAV (the company that makes the USBee was one of the first on the market, and apparently they haven't figured out that whole "Update your software thing". The application looks and feels like it belongs on Windows 2000.

Other: So cheap it's a no-brainer. Useable as-is, and with a little effort, you can make it eaven nicer.

Pros: Cheap, simple logic analyzer. Works well with USBee software, which is very user friendly and has various protocol analyzers.

Cons: No manual, Software only for windows and no open source program nor driver. duPont lines could be a bit longer.

Other: Useful gadget for low frequency digital circuit debugging. An open source alternative could be an arduino running SUMP, or the logic shrimp.

Pros: Cheap logic analyzer, software Saleae works as expected - of course it is necessary to change the VID and PID using Cypress Suite, but this is the internet lots of detailed guidelines. The whole work with the adjustment FW was not even 20 minutes, the most time was spent downloading Cypress Suite :)

Cons: As one little drawback I see the low quality sticker, but it does not matter when using it.

Other: Excellent buy for a good price, I am very satisfied.

Pros: It works as it should. It's cheap. Works fine with Saleae Logic software.

Cons: No manuals or software shipped, though i guess you know what you're doing if you buy this thing. Build quality is low, loose plastic parts, poor printing.

Other: I'm not that much into PCB stuff to buy expensive analyser (yet). But this thing is just what i need for now. Perfect for sniffing data on low speed links.

Pros: Very cheap, yet gets the job done! Comes with nice quality female header wires and a (Nokia o.O) USB cable. Overall it's a great buy. You want to download the USBee Suite Pro software and the USBee DX for the drivers. I also got it to work with the Saleale software too.

Cons: Plastic case is not well finished but that is just cosmetic (what would you expect for this price?). Also it sure does not offer any noise protection (but you probably won't need much at these sample rates). Not easy to install due to lack of instructions (I'll make a post with instructions in the forum).

Other: Great tool, well worth the buy.