OP-COM V CAN Diagnostic Interface for Opel

- Version: 2009V
- PC based diagnostic program
- Functions:
- Covers almost all Opel cars, even new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B
- Lets you read out and clear fault codes, shows you live data, lets you to perform output test
- Supports many control units, like Engine, Automatic Transmission, ABS, Airbag, Engine Cooling module, Instrument Cluster, Electronic Climate Control, Body Control Unit, just to name a few examples
- Since Opel uses many pin in the OBD connector, the diagnostic interface works as a multiplexer, and selects the appropriate pin for communication
- PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82, KWP2000)
- Fault codes will be shown with all available information:
- Full fault code text description
- Full status information (Present, Not present, Intermittent)
- You can print out, save, or copy the fault codes to any other application. Fromthe fault codes window, you can go directly to the measuring blocks window
- The program shows you measuring block information on many control module, you can choose anything from the list on your own
- The program is capable of showing 8 measuring block parameter simultaneously. The sample rate is depends mostly on the communication protocol. For example, older system, like Omega-B X 25 DT Engine (ISO-9141-2) can be very slow, during communication, while newer Multec, or Bosch units are faster (using KWP-2000), and the newest CAN based control units are very fast
- You can also run output tests on many controllers
- PIN6-PIN14
- PIN3-PIN11
- PIN1
- HSCAN - Dual-wire, High Speed CAN-BUS, 500 kbps
- MSCAN - Dual-wire, Medium Speed CAN-BUS, 95 kbps
- SWCAN - Single-wire, Low Speed CAN-BUS, 33.3 kbps
- Cable length: 152cm