Plastic Kinect Sensor TV Clip for XBOX 360 (3-Piece Set)

Pros: * Works great!
* Cheaper than any store around here.
* Adjustable to fit almost any flat screen TV.
* Feels like it won't work or support the weight, but it holds the Kinect up nicely.
* Gives your setup a cleaner look.
* Wall mount is probably cleaner, but then you can't move it.

Cons: * Depending on your house, this does shake when you jump. At my house it's fine in the basement, but at my friend's house, his floors shake his TV stand which shakes his Kinect. We just put a bit of double sided tape to hold it down.

Other: * Get one!

Pros: Kinect requires to be above 60sm from the flor. Without such a tool it is not an easy task. With this tool it is very easy to setup your kinect on a proper place. For me it tooks 10 minutes. Before that kinect stands under TV and head was not fully recognized.
It made from the normal quality plastic with good construction with good fixing mechanizm. Cames in cartoon box which itselfs contain installation instruction, guide with pictures, step by step. Even you do not need to read text, pictures are self explanetory.

Cons: Designed for thick LCD panels. With my LED panel it was a litle bit tricky to install it. To install first of all I rotate by 180 degree the plate which should stick to back side of TV. Second, for it to be more sticky I used a few layers of double side glue tape.

Other: This one is more universal, but looks cumbersome. It will be good to have a tool which will hide kinect stand (which is visualy too big) behind TV

Pros: * Very very cheap price compared to the oem one. $$$ economy.
* fits on the flat panel somehow well (the back of the tv is in an angle and the flat)
* it does the job the way it's meant to be.
* easily removable

Cons: * the stand is a little big, but it does the job.
* since the back panel of my flat tv is not perfectly flat ( the back of the tv is in an angle and the flat) it doesn't fit perfectly, but it does stay in play when well thighten

Other: * for the price, you need to buy one.
* you will be surprised.

Pros: + Solid plastic, not the cheap type.
+ Good build quality.
+ Assembly time: 30 sec.
* Buen plástico, no del económico.
* Sólida construcción de las piezas
* Tiempo de armado: 30 seg.

Cons: + If the back of your LCD is a little bit curved it may not grip very well. Meaning it will not be fully and solidly attached, but it won't be falling.
* Si la parte trasera de tu LCD es algo curva puede que el agarre no sea perfecto. Es decir, es grip no es fantástico y puede tener algo de movimiento, pero no caerse.

Other: + Solid and very practical.
+ A must if your space is a bit tight for local multiplayer Kinect.
* Sólido y muy práctico.
* Necesario para quienes tienen poco espacio para jugar localmente en multijugador con Kinect.

Pros: Better designed and quality than I expected for the price.

Cons: May be a bit loose on TVs with curved front or back but you can solve this with a little double sided tape.

Other: We first spend HEAPS on a OEM TV stand but found it a pain in the arse with VESA screws and needed to sit almost dead centre on the top of the TV and we needed to offset the kinect to use it at an angle so got this. Very pleasantly surprised with it. Get one!

Pros: It is very useful if your LCD tv is thick enough. I have a LED tv which is only 2 or 3 cm thick (around 1 - 1.2 inch) and I just could not fix this thing onto it. There is no way. However if your tv has a relatively fat back and is at least 10 cm thick (4 inch) then you can go for it. It attaches itself quite strongly if you can make it work.

Cons: Like above if the back of your tv is curved around the top (where this thing is supposed to attach itself) or it is too thin (anything below 10cm is problematic) then this is not the thing for you.

Other: Get it if you have a regular lcd, forget it if your tv is thin (thin is below 10cm).

Pros: It's cheap and perfect for mount your kinect to a flat panel tv. Easy to use. In minutes you have all mounted and playing. Build quality is good, It's only a support.. has a rubber in the kinect mount for keep it safe in place.

Cons: In some cases, like me, that I have a LG plasma tv with a depth higher than a lcd or led, I must reverse the support to fit, and works ok.... not do much pression or can brake the plastic

Other: Perfect for the price. Others mounts similar to this costs triple price.

Pros: Very Cheap and Usefull. I order by mistake. I really wanted The Wall kinect support. Wherever... I open my shipping bag and found a great gadget an fit in My LCD perfectly. Ordered 3 the first time. Now ordered 5 more.

Cons: If your LCD it´s curve in the back, maybe the support dosn´t fit perfectly. (I´s loose), but your kinect it´s safe (will not fall)

Other: it´s a great gadget. The kinect capture all the place and you will scaned perfectly. I live in a small appartament and this support it´s very usefull because place the kinect in the perfect angle.

Pros: The mount comes in three parts, assembles very easily and is an easy slide into the holding compartment for the Kinect sensor unit. It feels secure once mounted and fits very well on our Panasonic Viera.

Cons: None found.

Other: It not only secures up the sensor but also places it closer to the ideal eye-level that's recommended for the Kinect. I think it's great value for the price. Highly recommended.

Pros: It's a nice build!
Works well with the Kinect, that fits in just snuggly in the holder.
With this holder you no longer have to have like a table under your tv. Especially handy when you have your tv wall-mounted.

Cons: The model allows for a certain set of TV-thickness.
When you have a plasma-TV (relatively thick) with like 5 or more cm of thickness it fits perfectly!
I've got a new LED-tv which is 2,5 cm thick, the clip really can't clip to my TV. I had to use a saw and cutters to modify it to fit my slim tv.

Other: BUY!
After modification I finally dismissed the table underneath the wall-mounted tv, really nice!