Pressure Switch for Ultrafire C2 Flashlight (55cm Coiled Cable)

Pros: Good and very cheap, works great with my Ultrafire C2. Smooth to screw the cap on.
Nice finish.

Cons: A bit clunky, feels like there is five different switch contacts along the length of the pad. This needs and even squeeze to work, no biggie.

Other: Got a c2 flash light, need a tactical pressure pad, for airsoft, paintball, security or police work, need it cheap.
Then this is for you.

Pros: First, let me say that I didn't try this on any flashlights, I just used it for parts. The build quality seems to be reasonably good. The contact switch is momentary.

Cons: Being a momentary switch, it may cause problems with flashlights that have multiple modes. You may end up switch modes accidentally. The plastic covering the switch is rather stiff, and crackles when the switch is pressed. The switch itself makes a noticable 'click'.

Other: Inexpensive, so taking it apart isn't a problem if it breaks.

Pros: First, let me say that I didn't try this on any flashlights, I just used it for parts. The build quality seems to be reasonably good. The contact switch is momentary.

Cons: Being a momentary switch, it may cause problems with flashlights that have multiple modes. You may end up switch modes accidentally. The plastic covering the switch is rather stiff, and crackles when the switch is pressed. The switch itself makes a noticable 'click'.

Other: Inexpensive, so taking it apart isn't a problem if it breaks.

Pros: This switch works with the listed UltraFire C2 lights.
It also works with Romisen RC-G4 lights, like this one: http://www.dealextreme.com/details.dx/sku.7418

Cons: It did not work with Ultrafire 501A/501B/501C/501D, 502B/502C/502D lights, like this one: http://www.dealextreme.com/details.dx/sku.16240 That light needed this switch: Superfire Gun Mount Pressure Padhttp://dealextreme.com/details.dx/sku.1025
It also did not work with 12 Led Police lights like these: http://www.eliteairsoftuk.com/lights_lasers/torch/img_torch/police_brand_12_led.jpg That light needed this switch: Superfire Gun Mount Pressure Padhttp://dealextreme.com/details.dx/sku.1025
Finally, it did not work with a really old 5 watt luxeon light that had a compass in the tail cap switch, but I can not find any pics of it on the web. That light needed this switch: Superfire Gun Mount Pressure Pad http://dealextreme.com/details.dx/sku.1025
It does not work with the Xenon Police flashlights like these: http://www.dealextreme.com/details.dx/sku.2025 That light needed this switch: Switch for Ultrafire C2 Flashlight http://dealextreme.com/details.dx/sku.14023

Other: This switch works with UltraFire C2 lights and with Romisen RC-G4 lights.
Between all of their 5 remote pressure (tape) switches, DX has a switch for every one of my 123A powered tac-lights.

Pros: High quality of build with little or no roughness to the cap threads. Threads on easily to an Ultrafire C2 flashlight. Pressure pad works well, and is held down easily by rubber bands.

Cons: cord is just a little on the long size, but better too long than too short. No other cons that I can see.

Other: Again, excellent value and quality of build.

Pros: Simple, effective and easy to use. The brief "only stays on while pressed" remote switch is a major benefit to rifle shooters using this product attached to one of the compatible torches. A complete contained unit with no trailing wires and very bright flood-type when used in conjunction with the C2 torch. So far it's remained reliable after being used 2-3 times a week for approx 3-4 hours at a time.

Cons: The only cons I find are the threads aren't cut very smoothly and it's very squeaky and stiff when attaching to the body of the torch. Also after a purpose test, if leaving the torch on for a period of time the remote unit tends to warm up quite a bit.

Other: Excellent item when used in conjunction with a compatible 1000+ lumen torch for air rifle and rimfire rifle shooters for lamping rabbits etc after dark. When used with a TH-T60 1000 lumen or C2 T60 1200 lumen Ultrafire torch the complete unit is a very capable torch for use out to 75-100 yards.

Pros: Works with FandiFire C8 http://www.dx.com/p/90605 perfectly. Get it now!! The cap is well built, it has no rough edges and it screws on the flashlight very well. It's perfectly watertight, so you can depend on it.

Cons: Could be a better built remote switch, if you press it in the edges it kind of 'blinks'. You have to press it firmly/tightly. Don't hesitate because if you do it won't work.

Other: Could be a bit cheaper, and better built.

Pros: Works with C2/C8 flashlights. The cap is very vell built, threads on easily to an C8 flashlights. Very good value for the money.

Cons: Impedance of wires inside cable. For professional use with fashlights with AMC7135 drivers, where constant lumens are required as much as possible i would to recommend exchange of cable with lower impedance.

Other: Good switch for the money.

Pros: The inner, essential components( just a direct circuit that connect to the switch) can easily be transferred to a flashlight switch of another dimension. The extension chord is really, really long, and you can virtually place the light and the switch anywhere on a single firearm.

Cons: They are not water proof. I did use some Nextorch silicone grease later along the threading of the inside to make it water proof, and that's something relatively easy to do. The spring tension on the negative end is a little too high for my use so I cut off portions of it. I'd prefer to have weaker tension to protect the battery.

Other: Unless you are mechanically oriented, don't buy this if you are not sure you have a C2 light.

Pros: Solid flashlight pressure switch. I originally purchased it for a different flashlight, but it was too small. Luckily it fit and worked with my laser perfectly.

Cons: The cord is a bit too long for my purposes, but that was remedied by some electrical tape. The pressure switch requires a bit of force to activate, but it's nothing unmanageable.

Other: I would purchase it again if I needed another pressure switch.