QQ Wizard Video Card Heatsink Cooling Fan for Nvidia and ATI (2500RPM)

Pros: This is a great heatsink for the price. With the stock cooler my Radeon HD 4850 idled at around 80 degrees Celsius. With this cooler it idles at 45 degrees Celsius.
It comes with a small amount of thermal grease.

Cons: I had to modify the fan's power connector in order for it to work. I had to shave some of the plastic off the connector so it could fit. It's not that big of a deal though.

Other: Buy this if you have a video card that's running hot, it's cheap and is superior to most stock coolers.

Pros: - Good Price.
- Good build quality for the price.
- Comes with thermal grease (i used another).

Cons: None i can think. This is a cheap item that will do its job.

Other: I brought just because the stock cooler of my 8800gs was TOO loud. So i just dont care about the temps, as my stock cooler was ok with it.
Great job DX. I had my item at home in 5 business days.

Pros: Brought my ATI Sapphire HD3650 from 58c idle to 49c. Loaded @ 100% using furmark I noticed a drop of 11c from 64c (stock hsf) to 53c. I ran the load test for 30 mins for accuracy.
Sound level in my HTPC decreased to an unnoticeable level as experienced from my couch (~10 feet away)

Cons: Metal parts were covered in machining oil which had to be ceaned off before use.
Build quality is okay but not great. Screws holding the unit together were biting into thin metal therefore making it really easy to strip them.
I had to lap the base (this is with most aftermarket heatsinks.

Other: For the hd3650 or similar cards, I can highly recommend this cooler. It quieted down my pc to a desireable level and dropped 9-10c from my idle and load temps, across the board.

Pros: -good price
-really quiet
-Installing the heatsink was very simple
-temperatures dramaticaly drop down when i replaced with original one slot cooler (more than 10º in load !)

Cons: For this price really nothing.

Other: Cheap and silent heatsink ,good for replace stock heatsink.For this price not any alternative in my country.
I can recommend to replace one-slot noisy heatsink ->less noisy, possibly better OC.

Pros: -Great Price
-It fits on my nvidia 7900
-Its really silent
-Comes with silicone grease (although I do not recommend using it)

Cons: -The bag with the screws is a trap, do not try to open it like a zipploc since the screws are going to fly everywhere.
-The screws came bent.
-Not very specific instructions, luckly for me i knew where the springs

Other: despite the fact that the screws came folded and many fell to the floor when I opened the bag, the price and performance of the product they make up, here in Argentina is very difficult to get a replacement for a gpu cooler and fit in multiple video cards which cost only $ 10

Pros: - It's a very cheap product;
- It's silent;
- Performs pretty good;
- It will fit a lot of boards due to the large compatibility of the heatsink by use of several mounting points.

Cons: - No manual whatsoever, just loose parts; (thankfully, for even the somewhat technical it isn't that hard to understand, but still!);
- The isolating pads don't stay in their place (or mine didn't come with a layer of glue...);
- My cooler did fit, but during the process of fastening the nuts the mounting plate warped very easily!!!

Other: Cheap, but unfortunately therefore not the quality of a Zalman or similar heatsink.
I wouldn't recommend it.

Pros: Bought this to replace a dead fan on my ASUS EAH4670/DI/512M PCI-E (Radeon 4670). It fits perfectly and I could even use the original screws. Installation took only a couple minutes and the fan is much quieter than my original. Max temp while overclocked is now 72C which is much better than before. Also, improved my clocks to 840/1031 which was a nice bonus.

Cons: The only negative was the base was a bit rough (textured like a fingerprint) so I had to lap it before use. This wasn't really a big deal as it only take a bit of effort.

Other: Well worth the price and much better than my original fan. If you're looking for a cheap replacement fan, this is the one to buy.

Pros: Is an ideal solution for a vcard's cooler with an excellent price, was a surprise to me. The original cooler of my vcard (ati 4850) at idle operates at a temperature between 65 to 70 degrees Celsius but now between 45-51 (my city is very hot) and maximum GPU process between 85 and 100 (sorry for vcard abuse) now works between 60 and 65 degrees Celsius is a great wonderful solution.

Cons: hard to ensamble if you don't have experiencie, can't controle the fan speed :(

Other: Great solution at a great price, if the pocket does not provide for expenditure that is the answer

Pros: Very good cooler, very inexpensive , it is very quiet , you don't need any cable adapters you can plug it directly to your graphic card , and it keeps my temps low .

Cons: the contact surface it is very irregular not very soft, kinda rough actually, and the thermal paste in borderline (well what else could ask for the price)

Other: you should take care when tightening the bolts because it can start bending your graphic card and damage it so keep an eye on the PCB

Pros: Great. my graphics card ran 130 degrees F at idle before and now runs at 99-102 degrees. great build quality and also super quiet. it also included thermal compound which was a major plus.

Cons: HARD AS ANYTHING TO PUT ON. also i received the heat-sink but it had a different mounting bracket than the 1 pictured. this took me an hour just to figure how to put it on. also the instructions are in Chinese so good luck figuring them out. but after all is set and done I love it

Other: Will buy this again but DX should change the stock photo and show the different mounting hardware. But for the price it stopped the lagging in MW2 that was caused by the GPU overheating.