Repair Part Replacement DVD-ROM Optical Laser Drive Motherboard (D2B Mechanism) for Wii

Pros: My own D2E epoxy drive board died 3 weeks ago without a reason (modded for a couple of months).
the n i saw this and bought the drive, had some old wikkey 1 chips left, and wanted to give it a try.
~ 1 week ago i received the board, soldered a wiikey on it updated it, and it works perfect. its compatible with all wii's from Dms to D2e Epoxy

Cons: you need to have a little solder skills,
there are 6 wires that you have to desolder, there are big pats, so you its not to difficult if you solder once in your life.

Other: Good Price, works great, only missing ESd, of you have a broken motherboard and you have a little skill with soldering , its a must have, otherwise you have to buy for 20 dollars more a whole drive.

Pros: Board i recived did not have any cut pins. Works great. Wasn`t scratched like other people reported. It has to be gen Nintendo pcb. All connectors were in perfect nick. Soldering isn`t hard. Just make sure you write down which wire goes were!

Cons: Wasn`t sent in an anti static bag. But was wrapped in about 4 other anti static bubble rap around it.

Other: Works... Just get it if you need one! Or if you damaged your own board. This is just what you need.