Repair Parts Replacement Touch Screen/Digitizer for 4.3" GPS

Pros: Cheap, Fitted perfectly my 4,3" made in China GPS and worked. It recovered my GPS.

Cons: It is still working, no cons. May be the ony thing is because of its made of glass packaging should be better. I ordered four but got two of them were broken on the way.

Other: Notice, that its only touch screen not LCD screen. If your LCD is broken or defective replacement touch screen not enough. My be more than this, Dealextreme sell for all size GPS's LCD panel+Touch screen combination.

Pros: Perfect for my Booster BNAV-9450.
Good packaging. The product in glass.
Praticamente igual ao do meu GPS Booster BNAV-9450.
Veio bem embalado.
A tela é feita de vidro.

Cons: More than a month to arrive.
Levou mais de um mês para chegar. Achei que não viria mais. Porém, nunca deixei de receber meus produtos.

Other: Installation requires a little ability.
A instalação requer uma certa abilidade.

Pros: WORKS PERFECTLY !!! I CHANGED THE ONE MY WIFE BROKE AND IT RUNS LIKE A NEW ONE.
IT ARRIVED TO MY HOUSE (ISRAEL) AFTER 11 DAYS WELL WRAPPED.
I AM VERY PLEASED.

Cons: THE CONNECTOR IS SLIGHTLY NARROW AND HAD TO BE RE ADJUST.

Other: BEST VALUE !!! SAVED ME A NEW 4.3" GPS
WORKS PERFECTLY !!! I CHANGED THE ONE MY WIFE BROKE AND IT RUNS LIKE A NEW ONE.
IT ARRIVED TO MY HOUSE (ISRAEL) AFTER 11 DAYS WELL WRAPPED. I AM VERY PLEASED.
THE CONNECTOR IS SLIGHTLY NARROW AND HAD TO BE RE ADJUST.

Pros: A very long time went to Russia in the DX status waiting for a long time hung provider.
But I waited. Changed to avtonavigatore TEXET TN-505, the panel came up as a native.
Very good build quality, very cheap, in Russia it costs $ 95.
I will order more. Thank you!

Cons: Disadvantages not found.

Other: Very good build quality, very cheap, in Russia it costs $ 95.
I will order more. Thank you!

Pros: It was cheap and worked for me. Has self-adhesive band to make it stick to the LCD Screen Saved me from buying a new gps.

Cons: Connecting cable was very short. I had to lengthen it with the cable from my broken digitizer. No other cons.

Other: The cable is just below 1 inch in length. If you need a longer cable be sure that you can solder a longer one. It works and it's cheap. If you need one, this will do just fine.

Pros: Build quality is great ,digitizer is packed with bubble foil.Both sides of digitizer have foil.One side of digitizer is with sticky edges so you can instal it easy on display and another is with foil same as on new GPS devices.I have changed mine broken and with very little soldering it works again perfectly

Cons: No cons at all

Other: Buy it ..it is just great and you can easy repare your broken GPS

Pros: I have an arduino and I wanted to play with the screen, so I ordered it, once you have this one is great. Good size, very good response.
I came really fast and I was able to use it from the first day.
You can map the screen really fast with arduino and nintendo DS tutorial on the internet.

Cons: No multitouch, I knew that, but is not really a Con.
No cons whatsoever. =)

Other: If you need this touch screen for your GPS buy it, it works!
If you need it for your arduino or electronic project I also recommend it .
Go for it is a good product!

Pros: First one i received was damaged in shipping, but DX sent a new one.

Cons: They wrapped it with plenty of bubble wrap on the front and back, but the sides only had 1 or 2 layers of it, so hopefully it doesn't end up at the edge of your shipping package if you're ordering a lot.
I was hoping for a simple replacement for a Garmin Nuvi 650 touchscreen that stopped being reliable, but the cable coming out of this is about 1 inch too short and only lines up exactly if it could be installed upside down.
The cable is only about 1 inch long, not the nearly 3 inches the official product images show.

Other: Seems like a good item if you know what you're doing, but I won't be able to tell completely until i find a way to extend the cable.

Pros: Simply wonderful. Works great with PICAXE and Arduino microcontrollers. Good quality. Easy to set up.

Cons: The flat cable is very short and difficult to extend. It is long enough for most enclosed projects anyway though.

Other: I highly reccommend this product as it is easy to use and very useful in microcontroller projects!

Pros: good

Cons: They wrapped it with plenty of bubble wrap on the front and back, but the sides only had 1 or 2 layers of it, so hopefully it doesn't end up at the edge of your shipping package if you're ordering a lot. I was hoping for a simple replacement for a Garmin Nuvi 650 touchscreen that stopped being reliable, but the cable coming out of this is about 1 inch too short and only lines up exactly if it could be installed upside down. The cable is only about 1 inch long, not the nearly 3 inches the official product images show.

Other: ok