Silicone Tailcaps for Flashlights (14mm Orange / 10-Pack)

Pros: bright orange, good for eye catching stuff. Silicon. Replaces standard tailcap in Ultrafire C2, WF-400/600/500/800, Wastward YJ flashlights and some AA DX lights.

Cons: not GITD.

Other: although green/orange/GITD tailcap sold by DX measure 14mm all of the different colour has a different size and diameter.

Pros: Cheap replacement for worn-out tailcap Eye-catching color helps to personalize your property Good texture/tactile quality

More rigid than SKU 7321

Cons: Not GITD

Other: I installed one of these in my 5 mode MTE Rebel with slight modification when the GITD 7321 was popping out of the hole. Pleased with the results. They do make glow in the dark material in orange, right?

Pros: Great quality and decent price.. I don't know where else to get these..

Cons: None whatsoever..

Other: Looks especially great on a black torch as it provides a good contract against the black body. Not so nice on natural or grey finished torches.

Pros: Cheap price,looks good,quality is there.

Cons: none really

Other: Get it to add some life to your light body. I ordered them for my C3 and looks really good.

Pros: They do what they should do without any complaints. Good quality. The color is nice also.

Cons: Don't really know what to do with other 9 tailcaps after I installed one in flashlight. 5-pack would be more advantageous for me.

Other: Good product.

Pros: - Color is great for black flashlights - Price - Build Quality may be better than the tailcap your currently using - Fits most of the flashlights DX sells

Cons: - Must know how to replace your current tailcap (If your buying this then you should know at least)

Other: If you own any DX flashlights, this is great to have as either an upgrade or to fix torn tailcaps now or in the future.. Recommended to have on hand in an emergency since its takes a while to receive if ordered..

Pros: it really fits the ultrafire C3 well you only have to remove a small piece of rubber on the inside of the tailcap.

Cons: i could find none at the moment.
photo's of the sku 5728 and 5023 are probably switched

the sku 5728 is the darker orange one

Other: if you have a ultrafire C3 buy this
although the SKU 5023 looks darker it is not
this is the tailcap you want for your ultrafire light

Pros: I got this hoping it would work with my P2d ce. Frankly I'm a cheapskate. They work well and look attractive on a natural colored fenix.

Cons: some trimming of the "nub" is necessary. You can't tailstand with this button.

Other: They work with the P2d ce and I would highly recommend this product. I just can't see spending so much for one button.

Pros: Great quality. I used them on a C3 and a C-8. The provided stock tail cap on the C3 was junk, so its a good buy if you want to pick up that otherwise great flashlight.

Cons: As others said, the nubs on the inside need to be cut down to the proper thickness. This couldn't be avoided though, since the switches on the flashlights that could use this vary in length. For example, the C-8 only needed 1 or 2mm shaved off. The C3 on the other hand, required about 3/4rs of the nub to be cut off.

Other: If you are getting a C3, i would recommend you get these, or one of the other replacement 14mm tail caps(DX offers plenty of colours) If you aren't though, its still a cheap way to add some flair to your light.

Pros: Bright orange, easy to see. Adds some nice contrast to an all black torch.
Relatively thick with nice checkering.
Bright orange.

Cons: I have not came across any cons. I suppose if you don't like the color that would be a con!

Other: If your looking for a bright orange silicone tailcap boot and need one this size, well, this boot is for you.