SSC P7-C 2800mA LED Module with Copper Base (3.6V~8.4V)

Pros: Large spill
Fits in the xenon 6D http://www.dealextreme.com/details.dx/sku.8488 <a href="/details.dx/sku.8488"><img src="/images/externallink.gif" border="0" alt="Auto-Link: SKU 8488"></a> with a bit of grinding of the top lip.

Cons: If your after a thrower, this will not satisfy you.

Other: If your after a led module to go in the 6D xenon and probably the 5D xenon as well, this module is a good choice.

Pros: Mucha luz y a gran distancia , sencillo. Yo he adaptado el voltaje con un regulador LM350K , de 12V a un rango entre 1,2V y 8,4V . La luminosidad al 100% puede parecerse tranquilamente al faro de un coche.
La luz para una bicicleta de montaña es perfecta.

Cons: En reposo se calienta algo, es normal.
Es obligado poner disipador sino peligra

Other: See http://www.rutasbtt.tk
clic on "LUCES" an see photos

Pros: Nice reflector, screwed right into my wf500. Tint is awesome throws a massive spill and a decent hotspot, I reckon it would easily be good for 80-100 metres

Cons: After a min or so on the light would go really dim/off while still drawing current from the 2 batterys. Found that under the led there was some tape and thermal silicon, not the best having tape under an emitter for transferring heat away from led to heatsink.
I removed the led/tape and using thermal adhedive isolated the led from the heatsink electrically this did the trick and now it doesn't short out.

Other: If it worked without the issues I had I would be alot happier.

Pros: Removable parabolic reflector section
Springs to attach to batteries easily
Just provide 4-8 volts with adequate current and it works. No worrying about building something up.
Ultrabright. Especially for the small footprint.

Cons: Springs are the only positive connection, and the surface is the other. No wires or jacks or common connector.
The dimensions aren't published so it will be try this and that.
The compatible drop-in flashlight cases aren't listed so they are trial and error (perhaps with some grinding).

Other: Inexpensive and simple way to get a very bright light source you can adapt for various purposes.
Building it up from parts would be a lot more difficult, and breaking apart a flashlight would also be difficult.

Pros: I have it some days and it is perfect. I take it to put in a MAGLITE 3C and its exactly its size for it. But i will prefer to use it with 3 18650 i dont know if it will be destroy

Cons: Anyway it is very bright but with two 18650 finish very soon the batteries.I would like a opinion how can i use 3 18650 mayby with another driver?

Other: working ok I have it some days and it is perfect. I take it to put in a MAGLITE 3C and its exactly its size for it. But i will prefer to use it with 3 18650 i dont know if it will be destroy

Pros: Complete drop in package, no need to gather all the parts. Reflector is solid aluminium, with a good amount of screwed on contact with the heat sink. This is a good thing, the reflector gets hot too after a few minutes of usage. The soldering job was better than the one in the picture on the product page.

Cons: Lumen - Not sure if it's the driver, or more likely the emitter is a low bin one. Comparing this to my 700 lumen and 160 lumen Cree lights, I am getting a guestimate of probably 400-500 lumen. Reflector - I noticed the inside of the reflector has tiny micro scratches, maybe they should have a peel off protective sheet on it. Packaging, needs to come in a thicker bag. The zip bag it came with had holes in it from being so thin.

Other: For $25, it's an OK value for the package and was a fun project to mod the m@g.

Pros: This is a nice compact drop-in module. Very esay to use, good built. I put it in an older German torch which had halogen bulb. I just replaced the old plastic relfector and the SSC-P7 led immediately light on with a very nice spot and all the same throw light! Later I will change D-type batteries to LiPo so the modul will get enough volts to work with full power.

Cons: There is not much to say against this module.

Other: This item is very good choose for the money, it is worth to buy, because you can get a very good bright torch with good beam and throw in the same time nice cheap.

Pros: Very good build quality, just the right diameter for D-cell MagLites (possibly C-cell too, haven't tried), a complete drop-in package with minimal fitting for many flashlights.

Cons: The price is a bit on the high side, although justifiable for those who can't be bothered or don't know how to combine driver, emitter/base, heatsink and reflector.

Other: If you have a MagCharger this is probably the best and easiest upgrade on the market. Highly recommended. The only problem might be that your friends will ask you to convert their MagChargers too once they see yours.

Pros: Solid building, good soldering and nice matching of the emitter and the reflector. Better than shown in the pictures. Nice light pattern, strong thrower and adequate flood.

Cons: Poor packaging. The zip bag is so thin that it´s almost a miracle the module has arrived working. Many scratches inside the reflector.

Other: DX should provide better packaging for this gadget.

Pros: all the goodies in one package do not have to assemble wide operating voltage

Cons: delicate reflector surface hot spot a tad tight for my intended purpose no 3 mode driver available... lo - med - hi.... come one!! please!!!!!!

Other: great value, was pleased with it and for the price you cannot go wrong. This easily kept a barking dog at bay tonight on the walk home from the night hike... gotta love bright lights :-D