Touch Screen Digitizer for Asus 10" Eee PC 1000 UMPC Laptops

Pros: -The touchscreen works great. It's very sensitive.
-The software delivered with the touchscreen is good. It's easy to use and you can adjust a lot of settings with it.
-It is also a usb hub, so you can connect more usb devices to it.
-It also works with windows 7, and linux.
-It was really good packaged.

Cons: -Although it isn't all that difficult to install it you have to take your netbook pretty far apart.
-It was difficult to find some space for the controller.I placed it underneath the harddisk in my medion e1210.

Other: Good product for a good price.

Pros: touchscreens are very useful. it is NOT bluetooth, it is usb, it also works when bluetooth is disabled.

Cons: makes your screen a little darker and more reflective. is made of glass and therefore easy to crack.

Other: be careful when installing it. dont just put it in the display and try to tighten the screws as hard as you can.

Pros: IF you are VERY comfortable in taking nearly EVERY single screw out of your EEEPC and laying it out all over the table, this is for you! But if you are not familiar with insides of laptops then YOU WILL LIKELY KILL YOUR COMPUTER! And since this voids warranty anyway- you need skills!

Cons: It is CERTAINLY not BLUETOOTH at all, the mini PCB is a USB HUB which plugs into the CAMERA port (the mini webcam is USB inside the EEEPC). And it is NOT driverless- however the drivers (in XP use the BETA version) are awesome.

Other: Very finger friendly, multi mode drivers allow setup to "click on release", "click on touch", "movement only", etc. Just remember; in WinXP you need the RESISTIVE "BETA" version of the drivers from the CD included. - Too bad they did not include a little tape to secure the panel, but scotch tape works good enough. Nor did they include any adhesive to mount the "hub" so you will need a double sided foam tape.

Pros: Make your netbook a touchscreen for less than $70! Have something that most people don't and be the envy! Great for my wife's office note program. Not too bad to install on my ASUS eee 1000HE.

Cons: Voids warranty because you must remove a "void warranty" sticker in order to get inside the case. It's a moment to ponder, but worth it if you have the delicate touch and patience to do the mod. Does not include the double side tape needed to attach the screen or to attach the hub in the case. Not really bluetooth. I don't know what the description says that.

Other: Get this if you are not afraid to void your warranty and have some skills working with delicate electronics.

Pros: great priced touch screen for eee i was looking around everywhere then i stumbled onto this one. Works great, easy enough to install, seems to be strong enough (seeing i throw my laptop bag across my car every morning) if you know what your doing GET ONE

Cons: there was a few but i could get over it. This product is defently OEM it doesnt have a fancy box or instructions just the bits and pieces thrown into a whatever box. mine wasnt supplyed with any shock proof tape or mounting foams but i had bits at home to get by. this is a dificult mod and if you dont know what your doing u will probally wreck your eee.

Other: Great product if you have any skills in electronics. would be nice if DX posted installion guide PDF with the product description but theres heaps of info on the net about this anyway. So if your thinking about getting a touchscreen for eee this one seems as good as any, works well, very responcive and fun to use. BUY ONE YOU CANT GO WRONG

Pros: It's a seriously fun feature to add to your netbook, and useful when reading things like PDFs or scrolling through photos and stuff.

Cons: It's kinda hard to install, not that it's technically hard, The installation kinda speaks for itself, cover your screen with the translucent layer carefully(Glass!), and connect the wire to the webcam USB outlet. But the actual process is hard, cause portable computers, especially netbooks, are made tight fit, all parts use almost 100% of the casing they're in, thus leaving the modder to find a alternative way to hide the extra component(s). The screen is hard to calibrate, somehow the X axis was inverted, and the touch doesn't sense the position of my finger right, like, even if you calibrated it right, the right top corner of your screen is still a good inch to the left of your finger, while it works perfectly in the left bottom. (Yes i'm sure i didn't turn the screen around, cause i tried to turn it around and the screen wouldn't work otherwise anyway.) Not multitouch compatible, It's resistance based rather then capacitive, thus only one point will be measured, although that DOES mean you can use any stylus or plastic object of your nail on it to control it.

Other: Buy it, use it, break it, fix it, Trash it, change it, mail - upgrade it, Charge it, pawn it, zoom it, press it, Snap it, work it, quick - erase it, Write it, cut it, paste it, save it, Load it, check it, quick - rewrite it, Plug it, play it, burn it, rip it, Drag and drop it, zip - unzip it, Lock it, fill it, call it, find it, View it, code it, jam - unlock it. -- Nice thing, but expect as much as you'd get for the price. And make sure you're good with this kinda hardware and mods, average computer users will probably break their netbooks if they try this mod.

Pros: GReat price and well made piece of electronics. As long as you know how to take the netbook apart and are handy with screwdrivers you're set.

Cons: Not innately compatable with Windows 7. When I installed it with Win7 the OS recognized it, but couldn't calibrate it properly. I RMA my first screen because of this. MY second screen works great. It's worth mentioning that I RMA'ed the first screen because DX didn't include any drivers (on CD) with the screen. I didn't know the screen was supposed to come with drivers. I received my second screen with drivers, installed it, and it worked great.

Other: Great screen. Was shipped in a foam lined box inside of a padded envelope and arrived in great condition. If the CD with the drivers had been included in the first shipment I would have been really happy--as it was it took a couple months for to get a replacement (Backordered) but when it did show up it had all the required doumentation.

Pros: Cheapest I could find with free shipping, and I trust DX unlike some site I just googled. It works Lots of fun Great for netbooks where touchpad mice are limiting.

Cons: No instructions No double sided tape or rubber (come on DX it woulda costed like 10cents to include them.) Adds quite a bit of weight to your netbook, but well worth it.

Other: You literally have to take every screw out. Took an hour to install, another hour to troubleshoot.

Pros: So far i'm loving this. As soon as i got my package from DX i threw everything else i got to the side and installed this bad boy. The installation took maybe 2 hours (there are a ton of screws in the asus eee 1000he-b.

Cons: It doesn't come with a CD for drivers one of the posts below contain the link that worked for me: http://home.eeti.com.tw/web20/eg/drivers.htm The touch screen doesn't come with any duoble sided tape so you might want to get this ahead of time. also doesn't come with a pen/stylus

Other: If you have the money want to show off, and want a touch screen for your EEE i would definitely recommend this.

Pros: Works well once setup

Cons: No install info provided.

Other: For setup help try http://www.fidohub.com/productfile/epc%201000%20installation%20guide.doc