Universal Bicycle Mount for Flashlights and Gadgets (2cm~3cm Diameter Adjustable)

Pros: - very solid and durable material
- holds strong and secure
- needs only small space on the bars
- fits most thicker flashlights easy
- can be mounted "backwards" if you have a very long torch (2xAA) that would stick out

Cons: - wont fit thick handlebars
- needs at least 25mm flashlight diameter
- bottom screw could be a bit longer
- they should include some thinner rubber inlays to use it with thicker tubes

Other: maybe just remove the straps and wrap a place on the handlebar with a bit isotape to fit...

Pros: Quite solidly built, very easy to use.

Cons: It's inner diameter for grabbing the light is a bit on the big side, I wasnt able to mount my ultrafire wf-606a light in it by the handle, however it would grip ok by the head of the light. Not a big deal, but something to take into consideration.
The loop for mounting on the handlebars didnt fit properly on my bike (1970's road bike). It was either too big without the rubber insert, or too skinny without it. A thinner piece of old inner tube sorts that problem though.

Other: Good value, easy to use, works!

Pros: Holds my new Aurora AK-P7-5 flashlight perfectly. Firmly holds the flashlight but you can quickly pull the flashlight out of the mount to use as a self defense tool.

Cons: I had to use a thinner rubber shim for the handlebar. No big deal, I just cut a new strip of rubber for an old bicycle inner tube. It's not really a con. If your a cyclist that rides at night then you'll have an old inner tube you can cut. You could also use tape as well.

Other: If you want to use a 18650 powered flashlight on your bicycle this mount makes it so easy and it's inexpensive.

Pros: Holds Flashlight easily.
Easy adjustment.
Looks and feels sturdy.

Cons: Rubber inserts will come loose if there is nothing in the holder. (Those are the grips that hold the flashlight)
Bracket portion that holds onto the handlebars does not open up wide enough. In order to put the clamp on you must put it on from the ends of your handlebars. PITA if you have grips anad such glued on.

Other: Works fine once it's on there.

Pros: Cheap adaptor to allow you to mount a torch as a bicycle light. With the ridiculous amount of cheap, powerful torches here on DX you can get yourself a really powerful bike light for a very cheap price.
No tools required for use is handy so you can pull it off the bike and take it with you to stop scumbag thieves from thieving it when your bike is parked and locked.

Cons: Other users have reported the plastic is too brittle. It does seem to be pretty rigid but I haven't had a problem and I think with sensible/careful use it should last fine. If you are the heavy handed type who like to go ripping their torch out and smashing it back in the holder then maybe this isn't for you...

Other: Get one if you have the need, its cheap and it works.

Pros: This is a universal bike mount made for the new style flashlights that hold CR123a, 18650, etc. style batteries.
It fits very well on the handle bars of the ATV's and make it a lot brighter.
It is very rugged for the price, and does not fall off with the rough terrain.

Cons: Some tail caps might have to be removed on flashlights to fit in properly, but can be put back on once it is in the holder.
I can tell you there are no other problems with this bike mount at all.

Other: If you are looking for a fantastic handle bar mount for your bike, ATV, UTV, or any other application, this is the one you want.
It is very sturdy, and made of good quality plastics.
It does not break when you go to tighten the mount on the bar, or on the flashlight.
It also does not move from the spot you put it, unlike other mounts.

Pros: Cheap price
Sturdy mount
Accommodates a range of lights from 2-3cm diameters
Uses metal screws, unlike the SKU792 bracket which is all plastic.

Cons: A bit chunky - Compared to convetional bike lights with a built in bracket or quick release mounts, this one is much bigger than all the ones I have owned before.
No side to side adjustment.

Other: This is the best bracket for 2-3cm torches available on DX.

Pros: Build quality is above par for the price.
The clamping section which mounts it to your bars is made pretty well / pretty strong. It does not look like it will fall apart. I did 11 miles mountain biking with it with a light mounted with no problems.

Cons: Could include a couple rubber spacers / shims for smaller lights. Not a big deal though.

Other: For the price this is the best mount I have bought from DX.

Pros: The mount is well built out of solid quality plastic. The large rubber seal compresses well, securely holding the mount onto the handlebar. Screws and nuts are metal (not plastic) so threads will not strip easily.

Cons: None discovered ... :-)

Other: I recommend it, especially at this low price!

Pros: Very useful bike accessory for light. This mount is better than many of the standard mounts which come as part of standard bicycle lights. The mount which came with my bike light broke on the first week of rough terrain use, since it was a bit flimsy. This is more sturdier, and can accomodate LED lights which use AA battery, which is much cheaper than the AAA batteries used normally (atleat in my country).

Cons: Nothing as of now.

Other: Good product, good pricing, overall good experience. I would definitely recommend this product for any cyclist.