“ motor arduino ”

2-Channel Motor Driver Shield for Arduino (Works with Official Arduino Boards)

+ BlackMaterialPCBFeaturesCan drive 4-channel DC motor or 2-channel stepping motor, at the same time, can drive 2-channel steering engine; Supports UNO / Mega 2560OtherGreat for Arduino

$10.50

free shipping

(2 reviews)

» Arduino & SCM Supplies

L298N Stepper Motor Driver Controller Board for Arduino (Works with Official Arduino Boards)

can directly drive two 3-30V DC motor, and provide a 5V output interface, power for 5V single-chip circuitry, support 3.3VMCU control - Can easily control the DC motor

$5.80

free shipping

(18 reviews)

» Arduino & SCM Supplies

2WD Ultrasonic Smart Car Kits for Arduino (Works with Official Arduino Boards)

6mm acrylic glass plate - 1 x L298N motor driver - 1 x Arduino 328 forcing board - 1 x Holder kit - 1 x Steering gear - 1 x Ultrasonic mod

$49.99

free shipping

(3 reviews)

» Arduino & SCM Supplies

L298N Stepper Motor Driver Controller Board Module

H Bridge DC motor driver; Driven part of the terminal supply area Vs: 5~35V; Driven part of the peak current Io: 2A; Control signal input voltage range: Low -0.3V ApplicationStepper motor

$8.80

free shipping

» Arduino & SCM Supplies

High Torque 10RPM 12V DC Geared Motor

- 10RPM 12V DC geared motor - Current: 0.04A - Diameter: 25mm- Torque: 5kgcm

$8.30

free shipping

(1 review)

» Arduino & SCM Supplies

High Torque 60RPM 12V DC Geared Motor

- 60RPM 12V DC geared motor - Current: 0.05A - Diameter: 25mm- Torque: 4kgcm

$8.40

free shipping

(3 reviews)

» Arduino & SCM Supplies

High Torque 30RPM 12V DC Geared Motor

- 30RPM 12V DC geared motor - Current: 0.048A - Diameter: 25mm - Torque: 3.5kgcm

$8.40

free shipping

(1 review)

» Arduino & SCM Supplies

High Torque 80RPM 12V DC Geared Motor

- 80RPM 12V DC geared motor - Current: 0.05A - Diameter: 25mm - Torque: 3kgcm

$8.40

free shipping

(4 reviews)

» Arduino & SCM Supplies

High Torque 5RPM 12V DC Geared Motor

- 5RPM 12V DC geared motor - Current: 0.04A - Diameter: 25mm- Shaft diameter: 3.95mm- Torque: 6kgcm

$8.40

free shipping

(2 reviews)

» Arduino & SCM Supplies

High Torque 15RPM 12V DC Geared Motor

- 15RPM 12V DC geared motor- Current: 0.045A - Diameter: 25mm- Shaft length: 12mm; Shaft diameter: 4mm; Non-load current: 60mm - Torque: 4kgcm

$8.40

free shipping

» Arduino & SCM Supplies

Bluetooth Controlled Robot Car Kits for Arduino (Works with Official Arduino Boards)

1 x L298N motor driver ? 1 x Arduino UNO328 controller board ? 1 x Arduino sensor board ? 1 x Holder kit ?

$97.70

free shipping

(5 reviews)

» Arduino & SCM Supplies

28YBT-48 Stepper Motor with ULN2003 Driver (DC 5V)

- Model: 28YBT-48 - High quality stepper motor with ULN2003 driver - Suitable for microcontroller development - Voltage: DC 5V - Diameter: 28mm - Step Angle: 5.625 x 1/6

$5.10

free shipping

(10 reviews)

» Arduino & SCM Supplies

Large 3-CH R/C Battle Tank (11-Inch) Rechargeable

left motor, right motor, gun emplacement (left and right)- Dual motors and belts - movement and controls mi

$41.20

free shipping

(5 reviews)

» Stress Relievers

Ardumoto L298P Motor Driver Shield for Arduino (Works with Official Arduino Boards)

; All driver cable has anti-electromotive protection diode; Onboard external motor driver power supply terminal, supports 3.3V or 5V logic levelApplicationPerfect for Arduino

$12.30

free shipping

» Arduino & SCM Supplies

D1207005 DIY Stepper Motor Module for Arduino (Works with Official Arduino Boards)

ModelD1207005Quantity1ColorGreen + BlackMaterialFR4 board + electronic componentsFeaturesStepper Motor ModuleApplicationFor learning and developing, for DIY loversPacking List1 x Stepper Motor

$2.10

free shipping

» Arduino & SCM Supplies

SG90 Mini Servo with Gears and Parts (2Kg Torque)

The SG90 mini servo is lightweight, high-quality and lightning-fast. The servo is designed to work with almost all the radio control systems. It is with excellent performance brings you to another hor

$4.00

free shipping

(46 reviews)

» Repair Parts and Tools

TowerPro SG90 9G Mini Servo with Accessories

The TowerPro SG90 mini servo is lightweight, high-quality and lightning-fast. The servo is designed to work with almost all the radio control systems. It is with excellent performance brings you to an

$4.30

free shipping

(18 reviews)

» Repair Parts and Tools

Mystery 9G Mini Servo with Accessories (1.3kg Torque)

- Speed: 0.12 second / 60 degrees rotation- Torque: 1.3kg @ 4.8V~6V power - Comes with full ranged connectivity accessories and mounting screws

$3.94

free shipping

(12 reviews)

» Repair Parts and Tools

Dynam 9G Mini Servo (Translucent Black)

$4.90

free shipping

(5 reviews)

» Repair Parts and Tools

L298N Stepper Motor Driver Controller Board for Arduino (Works with Official Arduino Boards)

H Bridge DC motor driver; Driven part of the terminal supply area Vs: 5~35V; Driven part of the peak current Io: 2A; Control signal input voltage range: Low -0.3V ApplicationStepper motor

$10.70

free shipping

» Arduino & SCM Supplies

L298P Motor Driver Expansion Board for Arduino (Works with Official Arduino Boards)

signal input voltage range: Vin=-0.3V~1.5V(Low); Vin=2.3V~Vss (High) - Enable signal input voltage range: Vin=-0.3V~1.5V (Low, control signal is valid); Vin=2.3V~Vss (High) - Storage temperature: -25~+130'C - Arduino

$13.40

free shipping

(1 review)

» Arduino & SCM Supplies

ULN2803 Stepper Motor Driver Module for Arduino (Works with Official Arduino Boards)

-phase stepper motor. - There are ten pins in the left, 8 pins supply 5-volt power input, and leads to an external power supply, and the right side for the two stepper motor

$6.90

free shipping

» Arduino & SCM Supplies

4 Channels DC Servo Stepper Motor Driver Module for Arduino (Works with Official Arduino Boards)

- Color: Green - Material: PCB - Drivers up to 4 DC motors for 4WD smar car; 4 servo motors for robot DIY project; 2 stepper motors

$14.80

free shipping

» Arduino & SCM Supplies

32-CH Servo Motor Control Driver Board for Arduino (Works w/ Official Arduino Board) - Blue + Black

Can control 32 servo motor sync; Built-in three languages: Simplified Chinese, Traditional Chinese, EnglishApplicationA product for Arduino

$35.90

free shipping

» Arduino & SCM Supplies

L9110 Dual-Channel H-Bridge Motor Driver Module for Arduino (Works with Official Arduino Boards)

- Quantity: 1 - Color: Black - Material: PCB board - Dual L9110S chipset motor driver - Input voltage: 2.5V~12V - Current: 800mA - Can drive two DC motors

$5.60

free shipping

(2 reviews)

» Arduino & SCM Supplies

L9110 DC / Stepper Motor Driver Controller Board for Arduino (Works with Official Arduino Boards)

- Color: Red - Material: PCB - Features: L9110 motor driver controller board, can drive two DC motors or one 4-wire 2 phase stepper motor

$4.30

free shipping

(1 review)

» Arduino & SCM Supplies

2 Channels DC Stepper Motor Driver Module for Arduino (Works with Official Arduino Boards)

- Color: Green - Material: PCB - Working voltage: 6~9V - Drivers up to 2 channels 3~12V or 1 stepper - With 3.3V and 5V DC outputs - Suitable for MCU, sensor module with different voltage - Perfect for Arduino

$9.10

free shipping

(1 review)

» Arduino & SCM Supplies

L298N Motor Driver Controller Board Module for Stepper Motor / Smart Car / Robot / for Arduino

L298N Dual H Bridge DC Motor Driver IC - Driven part of the input voltage Vs: 5V~35V (or 7V~35V depending on power supply needs) - The logical part of the work current i

$10.30

free shipping

» Arduino & SCM Supplies

L298N Dual H Bridge DC Stepper Motor Driver Controller for Arduino Robot Car

: Direction indicators, power indicator, current detection, logic board power supply portApplicationControl the speed and the direction of the DC motor

$8.10

free shipping

» Arduino & SCM Supplies

DC 5V 28YBJ-48 Stepper Motor for Arduino ((Works with Official Arduino Boards /2 PCS)

+ iron + copperFeaturesDiameter: 28mm; Voltage: 5V; Step Angle: 5.625 x 1/64; Reduction Ratio: 1/64; Can use uln2003 chip as driverApplicationVarious types of electronic products or DIY loversPacking

$5.60

free shipping

(1 review)

» Arduino & SCM Supplies

EasyDriver V4.4 Stepper Motor Driver Board for Arduino (Works with Official Arduino Boards)

with 4, 6, and 8 wire stepper motors of any voltage - Adjustable current control - Power supply range from 7V to 30V. - The higher the voltage, the higher the torque at

$12.10

free shipping

(2 reviews)

» Arduino & SCM Supplies

L298N H-Bridge Stepper Motor Driver Module for Arduino (Works with Official Arduino Boards)

- Model: 03100005 - Quantity: 1 - Color: Red - Material: PCB - Logical voltage: 5V - Drive voltage: 5~35V - Logical current: 0~36mA - Drive current: 2A (Max. single bridge) - Working mode: H-bridge -

$9.80

free shipping

» Arduino & SCM Supplies

DAGU VA2 Aluminum Alloy Robot Arm Clamp w/ Two Metal Gear Motors for Arduino - Silver White + Black

5mm thickness aluminum alloy + 2 high quality motor, strong power, low noise, fine workmanship...Great for DIY project - A product for Arduino

$52.10

free shipping

» Arduino & SCM Supplies

DC 5V 4-Phase 5-Wire Step Motor + Driver Board Test Module for Arduino

/1s, insulation class: A, no-load pull-in frequency: >600Hz, pull in torque >34.3mN.m, temperature rise: <40K (120Hz), noise: <40dB (120Hz, No load, 10cm)ApplicationGreat for DIY projectsPacking List1

$4.40

free shipping

(1 review)

» Arduino & SCM Supplies

Mini Motor Speed Sensor - A

trigger, high sensitivity, stable performance - Suitable for motor speed, workpiece counting - 5V working voltage, black line output low level and white lines output high level - Applicable to a variety of platforms including Arduino

$5.50

free shipping

» Arduino & SCM Supplies

ULN2003 Stepper Motor Driver Board - Green

, B, C, D four-phase LED indicates the status of the stepper motor work; Stepper motor with a standard interface, when used directly pluggable.ApplicationULN2003 Darlington using high-power stepper motor

$4.30

free shipping

» Arduino & SCM Supplies

L293D Motor Driver Expansion Board Control Shield - Blue

connect to Arduino high resolution timer; Up to four two-way DC motors and each with 8-digit speed regulation (0.5% resolution); Up to two stepping motors

$10.00

free shipping

» Arduino & SCM Supplies

L293D Motor Driver Expansion Board Motor Control Shield - Blue

connect to Arduino high resolution timer (no dither); Up to four two-way DC motor and 4-channel PWM speed regulation (0.5% resolution); Up to two stepping motors

$8.80

free shipping

» DIY Parts & Components

L298N Motor Shield V1.0 Expansion Board - White

glass panel + FR4 - Function: Perfect for Arduino DIY project - Logic Control Voltage: 5V (From Arduino) - Motor

$13.60

free shipping

» Arduino & SCM Supplies

ULN2003 Stepper Motor Driver Module - Blue

-board ULN2003A chipset; 5-12V power supply; On-board 4-way indicator light; On-board XH-5P socket; Compatible with ArduinoApplicationStepper Motor

$2.80

free shipping

(1 review)

» Arduino & SCM Supplies